Re: [hylafax-users] Unable to send fax

["Darren Nickerson" <darren.nickerson@xxxxxxxx>]

Maurizio,

It looks like HylaFAX tried to send a 0-page fax ... which was never going 
to go well.

Check for errors in the document preparation.

-Darren


----- Original Message ----- 
From: Mauri
To: hylafax-users@xxxxxxxxxxx
Sent: Wednesday, March 08, 2006 6:50 AM
Subject: [hylafax-users] Unable to send fax


Hi List!!!

Looking to log mailed me from hylafax server there is someone in list that 
can help me on this problem?

No problem receiveng fax, but trying to send fax the result is alway 
negative (or without reason like this listed or with "no carrier detect" 
reason)

I'm using a Diva Eicon ISDN 2Fx, no capi, only Diva TTY

Thanks for you help

Maurizio

Your facsimile job to 0XXXXXXXX failed because:
<no reason recorded>

---- Transcript of session follows ----

Mar 08 12:40:18.05: [ 7922]: SESSION BEGIN 000000120 0039023085055
Mar 08 12:40:18.05: [ 7922]: HylaFAX (tm) Version 4.2.5
Mar 08 12:40:18.05: [ 7922]: SEND FAX: JOB 45 DEST 023085055 COMMID 
000000120 DEVICE '/dev/ttyds01' FROM 'alex <alex@vXXXXXXX>' USER alex
Mar 08 12:40:18.05: [ 7922]: <-- [12:AT+FCLASS=1\r]
Mar 08 12:40:18.05: [ 7922]: --> [2:OK]
Mar 08 12:40:18.05: [ 7922]: DIAL 023085055
Mar 08 12:40:18.05: [ 7922]: <-- [14:ATDT023085055\r]
Mar 08 12:40:53.34: [ 7922]: --> [7:CONNECT]
Mar 08 12:40:54.14: [ 7922]: --> [2:OK]
Mar 08 12:40:54.14: [ 7922]: REMOTE NSF "86 00 5A 00 00 C0 00"
Mar 08 12:40:54.14: [ 7922]: NSF remote fax equipment: unknown - Korea 5A
Mar 08 12:40:54.14: [ 7922]: <-- [9:AT+FRH=3\r]
Mar 08 12:40:54.14: [ 7922]: --> [7:CONNECT]
Mar 08 12:40:54.86: [ 7922]: --> [2:OK]
Mar 08 12:40:54.86: [ 7922]: REMOTE CSI "0039023085055"
Mar 08 12:40:54.86: [ 7922]: <-- [9:AT+FRH=3\r]
Mar 08 12:40:54.86: [ 7922]: --> [7:CONNECT]
Mar 08 12:40:55.20: [ 7922]: --> [2:OK]
Mar 08 12:40:55.20: [ 7922]: REMOTE best rate 14400 bit/s
Mar 08 12:40:55.20: [ 7922]: REMOTE max A4 page width (215 mm)
Mar 08 12:40:55.20: [ 7922]: REMOTE max unlimited page length
Mar 08 12:40:55.20: [ 7922]: REMOTE best vres 300 x 300 dpi
Mar 08 12:40:55.20: [ 7922]: REMOTE format support: MH, MR, MMR
Mar 08 12:40:55.20: [ 7922]: REMOTE supports T.30 Annex A, 256-byte ECM
Mar 08 12:40:55.20: [ 7922]: REMOTE best 10 ms, 5 ms/scanline
Mar 08 12:40:55.20: [ 7922]: USE 14400 bit/s
Mar 08 12:40:55.20: [ 7922]: USE error correction mode
Mar 08 12:40:55.20: [ 7922]: <-- [9:AT+FTH=3\r]
Mar 08 12:40:55.37: [ 7922]: --> [7:CONNECT]
Mar 08 12:40:56.71: [ 7922]: --> [2:OK]
Mar 08 12:40:56.71: [ 7922]: <-- [5:ATH0\r]
Mar 08 12:40:56.81: [ 7922]: --> [2:OK]
Mar 08 12:40:56.81: [ 7922]: SESSION END

---- Unsent job status ----

Destination: 02XXXXXXX
JobID: 45
GroupID: 45
Sender: alex
Mailaddr: alex@xxxxxxxxxxx
CommID: 000000120
Submitted From: 192.168.1.185
Page Width: 0 (mm)
Page Length: 0 (mm)
Resolution: 196 (lpi)
Status: (nothing available)
Dialogs: 1 (exchanges with remote device)
Dials: 0 (consecutive failed calls to destination)
Calls: 1 (total phone calls placed)
Pages: 0 (pages transmitted)
TotPages: 0 (total pages to transmit)
Attempts: 0 (attempts to send current page)
Dirnum: 0 (directory of next page to send) 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*