Re: [hylafax-users] Pagesize: Sending A4, but want na-let

["Mark Gillingham" <Mark.Gillingham@xxxxxxxxxxxxxx>]

Thinking the problem was a Courier V Everything modem in Class 1, I switched to the only other modem that works, which is a USR Sportster in Class1. The output was exactly the same. Perhaps there is a clue in the following log.

 

first pageis marked: Page 1 of 1 and 1/1

second page is marked: Page 01 and 1/1

 

The sending agent thinks there is a single page, but the receiving agent gets a page and a bit more. This looks just like a paper length issue.

 

hyla.conf PageSize is letter (I've also tried na-let).

 

Following is some log data. Any advice appreciated.

 

Feb 28 15:32:18.26: [24926]: SESSION BEGIN 000002609 131231233xxxx

Feb 28 15:32:18.26: [24926]: HylaFAX (tm) Version 4.2.1

Feb 28 15:32:18.26: [24926]: SEND FAX: JOB 113 DEST 31233xxxx COMMID 000002609 DEVICE '/dev/ttyS2'

Feb 28 15:32:18.26: [24926]: <-- [9:AT+FLO=2\r]

Feb 28 15:32:18.40: [24926]: --> [2:OK]

Feb 28 15:32:18.40: [24926]: <-- [9:AT+FPP=0\r]

Feb 28 15:32:18.55: [24926]: --> [2:OK]

Feb 28 15:32:18.55: [24926]: <-- [9:AT+FBO=0\r]

Feb 28 15:32:18.70: [24926]: --> [2:OK]

Feb 28 15:32:18.70: [24926]: <-- [10:AT+FCT=30\r]

Feb 28 15:32:18.85: [24926]: --> [2:OK]

Feb 28 15:32:18.85: [24926]: <-- [15:AT+FNR=1,1,1,1\r]

Feb 28 15:32:19.00: [24926]: --> [2:OK]

Feb 28 15:32:19.00: [24926]: <-- [9:AT+FIE=0\r]

Feb 28 15:32:19.15: [24926]: --> [2:OK]

Feb 28 15:32:19.15: [24926]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]

Feb 28 15:32:19.30: [24926]: --> [2:OK]

Feb 28 15:32:19.31: [24926]: DIAL 3123322974

Feb 28 15:32:19.31: [24926]: <-- [15:ATDT3123322974\r]

Feb 28 15:32:37.61: [24926]: --> [4:+FCO]

Feb 28 15:32:39.51: [24926]: --> [59:+FNF:00000900082D13124070334FFFFFFFFFFFFF011A02021001820130]

Feb 28 15:32:39.51: [24926]: REMOTE NSF "00000900082D13124070334FFFFFFFFFFFFF011A02021001820130"

Feb 28 15:32:39.51: [24926]: NSF remote fax equipment: unknown

Feb 28 15:32:40.22: [24926]: --> [27:+FCI:"        +13124070334"]

Feb 28 15:32:40.22: [24926]: REMOTE CSI "+13124070334"

Feb 28 15:32:40.68: [24926]: --> [20:+FIS:1,5,0,2,1,0,0,1]

Feb 28 15:32:40.86: [24926]: --> [2:OK]

Feb 28 15:32:40.86: [24926]: REMOTE best rate 14400 bit/s

Feb 28 15:32:40.86: [24926]: REMOTE max A4 page width (215 mm)

Feb 28 15:32:40.86: [24926]: REMOTE max unlimited page length

Feb 28 15:32:40.86: [24926]: REMOTE best vres 7.7 line/mm

Feb 28 15:32:40.86: [24926]: REMOTE best format 2-D MR

Feb 28 15:32:40.86: [24926]: REMOTE best 5 ms/scanline

Feb 28 15:32:40.86: [24926]: USE 14400 bit/s

Feb 28 15:32:40.86: [24926]: USE 5 ms/scanline

Feb 28 15:32:40.86: [24926]: SEND file "docq/doc117.ps;30"

Feb 28 15:32:40.87: [24926]: USE A4 page width (215 mm)

Feb 28 15:32:40.87: [24926]: USE unlimited page length

Feb 28 15:32:40.87: [24926]: USE 3.85 line/mm

Feb 28 15:32:40.87: [24926]: USE 1-D MH

Feb 28 15:32:40.87: [24926]: <-- [23:AT+FIS=0,5,0,2,0,0,0,1\r]

Feb 28 15:32:41.02: [24926]: --> [2:OK]

Feb 28 15:32:41.02: [24926]: <-- [7:AT+FDT\r]

Feb 28 15:32:41.17: [24926]: --> [20:+FCS:0,5,0,2,0,0,0,1]

Feb 28 15:32:48.77: [24926]: --> [7:CONNECT]

Feb 28 15:32:48.77: [24926]: SEND begin page

Feb 28 15:32:48.78: [24926]: <-- data [1030]

Feb 28 15:32:48.78: [24926]: <-- data [1025]

Feb 28 15:32:48.78: [24926]: <-- data [1024]

Feb 28 15:32:48.78: [24926]: <-- data [1024]

Feb 28 15:32:48.78: [24926]: <-- data [1024]

Feb 28 15:32:50.78: [24926]: <-- data [1024]

Feb 28 15:32:50.78: [24926]: <-- data [1024]

Feb 28 15:32:50.78: [24926]: <-- data [1024]

Feb 28 15:32:52.78: [24926]: <-- data [624]

Feb 28 15:32:52.78: [24926]: SENT 8814 bytes of data

Feb 28 15:32:52.78: [24926]: SEND 1D RTC

Feb 28 15:32:52.78: [24926]: <-- data [9]

Feb 28 15:32:52.78: [24926]: SEND end page

Feb 28 15:32:52.78: [24926]: SEND send EOP (no more pages or documents)

Feb 28 15:32:52.78: [24926]: <-- data [2]

Feb 28 15:33:00.71: [24926]: --> [7:+FHS:00]

Feb 28 15:33:00.71: [24926]: REMOTE HANGUP: Normal and proper end of connection (code 0)

Feb 28 15:33:00.71: [24926]: SEND recv MCF (message confirmation)

Feb 28 15:33:00.72: [24926]: SEND FAX (000002609): FROM user@xxxxxxxxxxx TO 31233xxxx (docq/doc117.ps;30 sent in 0:20)

Feb 28 15:33:01.49: [24926]: SEND FAX (000002609): FROM user@xxxxxxxxxx TO 31233xxxx (page 1 of 1 sent in 0:20)

Feb 28 15:33:02.51: [24926]: <-- [5:ATH0\r]

Feb 28 15:33:02.51: [24926]: --> [2:OK]

Feb 28 15:33:02.84: [24926]: SESSION END

 

 

>>>Lee Howard <faxguy@xxxxxxxxxxxxxxxx> 02/28/06 4:11 pm >>>

 

Mark Gillingham wrote:

 

 

>the log says "USE A4 page width (215mm)" was requested.

 

>

 

 

North American Letter, US Legal, and A4 all use the same page width

 

(it's the length that varies)... so don't worry about this part.

 

 

Lee.

 

 

____________________ HylaFAX(tm) Users Mailing List

 

 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi

 

On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null

 

 *To learn about commercial HylaFAX(tm) support, mail