Re: [hylafax-users] receiving on an external usr courier ?

[Alex Wang <hadyn_whx@xxxxxxxxxxx>]

Feb 17 10:09:11.98: [16246]: --> [5:ERROR]
Feb 17 10:09:11.98: [16246]: MODEM Command error

Try other modem.


On Fri, 17 Feb 2006 16:49:20 +0000
Franck Horlaville <fh.lists@xxxxxxxxxxxx> wrote:

> Hi list !
> 
> I've looked all over the place and don't get why I'm not receiving  
> faxes.
> 
> Phone rings, modem picks up, negociates, then the speaker shuts and a  
> second or two later it hangs up.
> 
> I tried Class 2.0 rtscts, class 1 xonxoff and class 1 rtscts -  
> default probed config files (from faxaddmodem)
> Below is the rtscts class 1 version of the config file
> 
> RedHat linux 7.3, hylafax 4.2.5
> 
> Thanks a bunch !!
> 
> ===
> $sudo tail /var/log/messages:
> Feb 17 13:48:42 laura FaxGetty[17291]: MODEM USR USRobotics Courier  
> V.Everything/USRobotics Courier V.Everything Configuration Profile...  
> Product type           France External Options                 
> HST,V32bis,Terbo,VFC,V34+,x2 Fax Options            Class 1,Class 2.0  
> Clock Freq             20.16Mhz Flash ROM              512k  
> Ram                    64k Supervisor date        04/23/97 DSP  
> date               04/21/97 Supervisor rev         033-7.1.8 DSP  
> rev                2.2.5 Serial Number          21NDDAV7ZFZE
> 
> Feb 17 13:48:48 laura FaxGetty[17291]: ANSWER: FAX CONNECTION  DEVICE  
> '/dev/ttyS0'
> 
> Feb 17 13:49:48 laura FaxGetty[17291]: MODEM USR USRobotics Courier  
> V.Everything/USRobotics Courier V.Everything Configuration Profile...  
> Product type           France External Options                 
> HST,V32bis,Terbo,VFC,V34+,x2 Fax Options            Class 1,Class 2.0  
> Clock Freq             20.16Mhz Flash ROM              512k  
> Ram                    64k Supervisor date        04/23/97 DSP  
> date               04/21/97 Supervisor rev         033-7.1.8 DSP  
> rev                2.2.5 Serial Number          21NDDAV7ZFZE
> 
> ===
> 
> $ ps wax | grep fax
> 22769 ?        S      0:00 /usr/local/sbin/faxq
> 22771 ?        S      0:00 /usr/local/sbin/hfaxd -i hylafax
> 17291 ?        S      0:00 /usr/local/sbin/faxgetty ttyS0
> 20982 pts/2    R      0:00 grep fax
> 
> ===
> 
> $ sudo cat log/c000000015
> Password:
> Feb 17 10:08:47.59: [16246]: SESSION BEGIN 000000015 21222248786
> Feb 17 10:08:47.59: [16246]: HylaFAX (tm) Version 4.2.5
> Feb 17 10:08:47.59: [16246]: <-- [13:AT+FCLASS=1A\r]
> Feb 17 10:08:52.86: [16246]: --> [7:CONNECT]
> Feb 17 10:08:52.86: [16246]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
> Feb 17 10:08:52.86: [16246]: RECV FAX: begin
> Feb 17 10:08:52.86: [16246]: <-- data [32]
> Feb 17 10:08:52.86: [16246]: <-- data [2]
> Feb 17 10:08:54.84: [16246]: --> [7:CONNECT]
> Feb 17 10:08:54.84: [16246]: <-- data [23]
> Feb 17 10:08:54.84: [16246]: <-- data [2]
> Feb 17 10:08:56.00: [16246]: --> [7:CONNECT]
> Feb 17 10:08:56.00: [16246]: <-- data [13]
> Feb 17 10:08:56.00: [16246]: <-- data [2]
> Feb 17 10:08:56.90: [16246]: --> [2:OK]
> Feb 17 10:08:56.90: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:08:58.03: [16246]: --> [7:CONNECT]
> Feb 17 10:08:58.67: [16246]: --> [5:ERROR]
> Feb 17 10:08:58.67: [16246]: MODEM Command error
> Feb 17 10:08:58.67: [16246]: FCS error
> Feb 17 10:08:58.67: [16246]: DELAY 70 ms
> Feb 17 10:08:58.74: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:08:58.85: [16246]: --> [7:CONNECT]
> Feb 17 10:08:58.86: [16246]: <-- data [3]
> Feb 17 10:08:58.86: [16246]: <-- data [2]
> Feb 17 10:09:00.07: [16246]: --> [2:OK]
> Feb 17 10:09:00.07: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:00.07: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:02.60: [16246]: --> [7:CONNECT]
> Feb 17 10:09:02.75: [16246]: --> [5:ERROR]
> Feb 17 10:09:02.75: [16246]: MODEM Command error
> Feb 17 10:09:02.75: [16246]: FCS error
> Feb 17 10:09:02.75: [16246]: DELAY 70 ms
> Feb 17 10:09:02.82: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:02.93: [16246]: --> [7:CONNECT]
> Feb 17 10:09:02.93: [16246]: <-- data [3]
> Feb 17 10:09:02.93: [16246]: <-- data [2]
> Feb 17 10:09:04.14: [16246]: --> [2:OK]
> Feb 17 10:09:04.14: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:04.14: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:07.46: [16246]: --> [7:CONNECT]
> Feb 17 10:09:08.09: [16246]: --> [5:ERROR]
> Feb 17 10:09:08.09: [16246]: MODEM Command error
> Feb 17 10:09:08.09: [16246]: FCS error
> Feb 17 10:09:08.09: [16246]: DELAY 70 ms
> Feb 17 10:09:08.16: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:08.27: [16246]: --> [7:CONNECT]
> Feb 17 10:09:08.27: [16246]: <-- data [3]
> Feb 17 10:09:08.27: [16246]: <-- data [2]
> Feb 17 10:09:09.48: [16246]: --> [2:OK]
> Feb 17 10:09:09.48: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:09.48: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:11.95: [16246]: --> [7:CONNECT]
> Feb 17 10:09:11.98: [16246]: --> [5:ERROR]
> Feb 17 10:09:11.98: [16246]: MODEM Command error
> Feb 17 10:09:11.98: [16246]: FCS error
> Feb 17 10:09:11.98: [16246]: DELAY 1500 ms
> Feb 17 10:09:13.48: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:13.59: [16246]: --> [7:CONNECT]
> Feb 17 10:09:13.59: [16246]: <-- data [32]
> Feb 17 10:09:13.59: [16246]: <-- data [2]
> Feb 17 10:09:15.57: [16246]: --> [7:CONNECT]
> Feb 17 10:09:15.57: [16246]: <-- data [23]
> Feb 17 10:09:15.57: [16246]: <-- data [2]
> Feb 17 10:09:16.73: [16246]: --> [7:CONNECT]
> Feb 17 10:09:16.73: [16246]: <-- data [13]
> Feb 17 10:09:16.73: [16246]: <-- data [2]
> Feb 17 10:09:17.62: [16246]: --> [2:OK]
> Feb 17 10:09:17.62: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:18.77: [16246]: --> [7:CONNECT]
> Feb 17 10:09:19.40: [16246]: --> [5:ERROR]
> Feb 17 10:09:19.40: [16246]: MODEM Command error
> Feb 17 10:09:19.40: [16246]: FCS error
> Feb 17 10:09:19.40: [16246]: DELAY 70 ms
> Feb 17 10:09:19.47: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:19.58: [16246]: --> [7:CONNECT]
> Feb 17 10:09:19.58: [16246]: <-- data [3]
> Feb 17 10:09:19.58: [16246]: <-- data [2]
> Feb 17 10:09:20.79: [16246]: --> [2:OK]
> Feb 17 10:09:20.79: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:20.79: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:23.34: [16246]: --> [7:CONNECT]
> Feb 17 10:09:23.50: [16246]: --> [5:ERROR]
> Feb 17 10:09:23.50: [16246]: MODEM Command error
> Feb 17 10:09:23.50: [16246]: FCS error
> Feb 17 10:09:23.50: [16246]: DELAY 70 ms
> Feb 17 10:09:23.57: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:23.68: [16246]: --> [7:CONNECT]
> Feb 17 10:09:23.68: [16246]: <-- data [3]
> Feb 17 10:09:23.68: [16246]: <-- data [2]
> Feb 17 10:09:24.89: [16246]: --> [2:OK]
> Feb 17 10:09:24.89: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:24.89: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:28.29: [16246]: --> [7:CONNECT]
> Feb 17 10:09:28.31: [16246]: --> [5:ERROR]
> Feb 17 10:09:28.31: [16246]: MODEM Command error
> Feb 17 10:09:28.31: [16246]: FCS error
> Feb 17 10:09:28.31: [16246]: DELAY 70 ms
> Feb 17 10:09:28.38: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:28.49: [16246]: --> [7:CONNECT]
> Feb 17 10:09:28.49: [16246]: <-- data [3]
> Feb 17 10:09:28.49: [16246]: <-- data [2]
> Feb 17 10:09:29.70: [16246]: --> [2:OK]
> Feb 17 10:09:29.70: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:29.70: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:36.70: [16246]: --> [0:]
> Feb 17 10:09:36.70: [16246]: MODEM <Empty line>
> Feb 17 10:09:36.70: [16246]: <-- data [1]
> Feb 17 10:09:36.71: [16246]: --> [2:OK]
> Feb 17 10:09:36.71: [16246]: RECV FAX: No answer (T.30 T1 timeout)
> Feb 17 10:09:36.71: [16246]: RECV FAX: end
> Feb 17 10:09:36.71: [16246]: SESSION END
> 
> ===
> 
> [fh@laura hylafax]$ cat etc/config.ttyS0
> # $Id: usr-rts,v 1.7 2004/05/19 21:17:23 lhoward Exp $
> #
> # HylaFAX Facsimile Software
> #
> # Copyright (c) 1990-1996 Sam Leffler
> # Copyright (c) 1991-1996 Silicon Graphics, Inc.
> # HylaFAX is a trademark of Silicon Graphics, Inc.
> #(...)
> # OF THIS SOFTWARE.
> #
> 
> #
> # Configuration for using the Class 1 command interface with
> # a USR Courier or Sportster modem and RTS/CTS flow control.
> #
> #
> CountryCode:            212
> AreaCode:               22
> FAXNumber:              "+212 22 24 87 86"
> LongDistancePrefix:     0
> InternationalPrefix:    00
> DialStringRules:        etc/dialrules
> ServerTracing:          1
> SessionTracing:         11
> RecvFileMode:           0600
> LogFileMode:            0600
> DeviceMode:             0600
> RingsBeforeAnswer:      1
> SpeakerVolume:          high
> GettyArgs:              "-h %l dx_%s"
> LocalIdentifier:        "HP Service Center"
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          "From %%l|%c|Page %%P of %%T"
> MaxRecvPages:           25
> #
> #
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> #
> ModemType:              Class1          # use class 1 interface
> ModemRate:              19200           # rate for DCE-DTE communication
> ModemFlowControl:       rtscts          # hardware flow control
> #
> ModemSetupDTRCmd:       ATS13=1&D2      # setup so DTR drop resets modem
> ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects  
> carrier (or not)
> ModemNoFlowCmd:         AT&H0&I0&R1     # setup modem for no flow  
> control
> ModemHardFlowCmd:       AT&H1&I0&R2     # setup modem for hardware  
> flow control
> ModemSoftFlowCmd:       AT&H2&I2&R1     # setup modem for software  
> flow control
> ModemResultCodesCmd:    ATQ0X4          # enable result codes
> #
> ModemMfrQueryCmd:       !USR
> ModemModelQueryCmd:     ATI3
> ModemRevQueryCmd:       ATI7            # XXX, returns a multi-line  
> result
> #
> # When AT+FCLASS=1 is issued the modem automatically switches
> # to software flow control; these parameters let the fax software
> # reset flow control as needed after entering Class 1.
> #
> Class1NFLOCmd:          AT&H0&I0&R1     # setup modem for no flow  
> control
> Class1HFLOCmd:          AT&H1&I0&R2     # setup modem for hardware  
> flow control
> Class1SFLOCmd:          ""              # modem does this automatically
> #
> # The remainder of this configuration is included so that the
> # modem "idles" in Class 0 while not sending or receiving facsimile.
> #
> ModemSetupAACmd:        AT+FCLASS=0&H1&I0&R2    # leave modem in class 0
> ModemAnswerCmd:         AT+FCLASS=1&H1&I0&R2A   # force RTS/CTS after  
> change
> #
> # Disables the reporting of bad frames by the modem.  This
> # overcomes a firmware problem in the x2 and V90 Sportsters.
> # It is not necessary for the Courier modem.
> #
> Class2NRCmd:    AT+FNR=1,1,1,0
> 
> 
> 
> Thanks again
> 
> 
> Franck Horlaville
> IT Manager
> Qualitech
> 
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*