Re: [hylafax-users] Sendtime hyla.conf (more)

[Tony Delov <tony.delov@xxxxxxxxxxxxxxx>]

On Thu, 2005-12-22 at 08:54 -0800, Lee Howard wrote:
> Tony,
> 
> I'm trying to reproduce your error condition, but I cannot seem to.
> 
> My system timezone is usually PST.  I don't have problems that way.  I 
> changed system timzone to EST for this test (see below)... as you'll see 
> I don't get the same results as did you.
> 
> I do find it very bizarre, however, that in your error condition 
> sendfax+hfaxd will, with the same process and SENDTIME setting queue one 
> job to go at one time and another job to go at a different one.  
> Something seems very flawed there, and as I cannot reproduce it here 
> (and as I haven't heard of this error before in several years of reading 
> this list), I suspect that the problem must be something unique to your 
> installation.
> 
> So maybe we should start with the basics... is your BIOS time set to 
> GMT, or is it set to local time?  What is the HylaFAX installation 
> history on this system (RPM first and then tarball perhaps)?
> 

Lee,
Thanks for the time and effort you've made on this.

I tried various variations with the bios clock which didn't help.
I've since re-installed a new system (redhat 9) with Hylafax 4.2.4 from
source.
And there isn't any similar type of problems.

Just for the record, the install history. 

	hylafax-4.2.2-1fc4.i386.rpm
	hylafax-4.2.3rc1-1fc4.i386.rpm
	hylafax-4.2.3.2.tar.gz
	hylafax-4.2.4.tar.gz

I think the problem happened after upgrading the rpm's, but I can be too
sure as I didn't keep any record of when I first noticed the problem.

Thanks for the help :)

Regards
Tony Delov








Attention:
The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.  Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any system and destroy any copies.

Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of The Gribbles Group.

Thank You.

Whilst every effort has been made to ensure that this e-mail message and any attachments are free from viruses, you should scan this message and any attachments.
Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachment.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*