[hylafax-users] T1 Timeout Errors when Sending

["David Guthu" <davidguthu@xxxxxxx>]

I got one of these today device is an 8 port fax card (ISI5634UPCI) from Multitech. This was when sending a fax. Thanks!

Dec 02 13:17:41.05: [18183]: SESSION BEGIN 000002995 16024803084480 Dec 02 13:17:41.06: [18183]: HylaFAX (tm) Version 4.2.3 Dec 02 13:17:41.06: [18183]: SEND FAX: JOB 105 DEST 4803084480 COMMID 000002995 DEVICE '/dev/ttyMU1b' FROM 'Bernadette Mercado on Fax <bmercado@xxxxxxxxxxxxxxxxxxxx>' USER bmercado Dec 02 13:17:41.06: [18183]: <-- [12:AT+FCLASS=1\r] Dec 02 13:17:41.07: [18183]: --> [2:OK] Dec 02 13:17:41.07: [18183]: DIAL 4803084480 Dec 02 13:17:41.07: [18183]: <-- [15:ATDT4803084480\r] Dec 02 13:18:00.28: [18183]: --> [7:CONNECT] Dec 02 13:18:02.26: [18183]: --> [10:NO CARRIER] Dec 02 13:18:02.26: [18183]: MODEM No carrier Dec 02 13:18:02.26: [18183]: <-- [9:AT+FRS=7\r] Dec 02 13:18:04.36: [18183]: --> [2:OK] Dec 02 13:18:04.36: [18183]: <-- [9:AT+FTH=3\r] Dec 02 13:18:05.32: [18183]: --> [7:CONNECT] Dec 02 13:18:05.71: [18183]: --> [2:OK] Dec 02 13:18:05.71: [18183]: SEND send CRP (command repeat) Dec 02 13:18:05.71: [18183]: <-- [9:AT+FRH=3\r] Dec 02 13:18:11.06: [18183]: --> [7:CONNECT] Dec 02 13:18:13.11: [18183]: --> [10:NO CARRIER] Dec 02 13:18:13.11: [18183]: MODEM No carrier Dec 02 13:18:13.11: [18183]: <-- [9:AT+FRS=7\r] Dec 02 13:18:43.11: [18183]: MODEM <Timeout> Dec 02 13:18:43.11: [18183]: DELAY 200 ms Dec 02 13:18:43.31: [18183]: No answer (T.30 T1 timeout) Dec 02 13:18:43.31: [18183]: SEND FAILED: JOB 105 DEST 4803084480 ERR No answer (T.30 T1 timeout) Dec 02 13:18:43.31: [18183]: <-- [9:AT+FTH=3\r] Dec 02 13:18:43.32: [18183]: --> [2:] Dec 02 13:18:43.32: [18183]: SEND FAILED: JOB 105 DEST 4803084480 ERR No answer (T.30 T1 timeout); too many attempts to send Dec 02 13:18:43.32: [18183]: <-- [5:ATH0\r] Dec 02 13:18:43.41: [18183]: --> [2:OK] Dec 02 13:18:43.41: [18183]: SESSION END