HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] having problems receiving some faxes -> sending = fine



I installed a external fax modem from officemax and cannot receive faxes...
 
here is my config.ttyS0
 
CountryCode:            1
AreaCode:               xxx
FAXNumber:              xxx-xxx-xxxx
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0666
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          "on "
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "xxxxxxxxx"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use this to supply a hint
ModemRate:              19200           # rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&K0           # setup no flow control
ModemHardFlowCmd:       AT&K3           # setup hardware flow control
ModemSoftFlowCmd:       AT&K4           # setup software flow control
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd:       !Rockwell
ModemModelQueryCmd:     !RC288DPi
ModemRevQueryCmd:       ATI3            # product information
#
ModemDialCmd:           ATDT%s          # T for tone dialing
 
penguin log # cat c000000089
Dec 01 17:25:20.36: [30721]: SESSION BEGIN 000000089 15125124531443
Dec 01 17:25:20.36: [30721]: HylaFAX (tm) Version 4.2.2
Dec 01 17:25:20.36: [30721]: <-- [4:ATA\r]
Dec 01 17:25:26.09: [30721]: --> [7:CONNECT]
Dec 01 17:25:26.09: [30721]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Dec 01 17:25:26.09: [30721]: RECV FAX: begin
Dec 01 17:25:26.09: [30721]: <-- data [32]
Dec 01 17:25:26.09: [30721]: <-- data [2]
Dec 01 17:25:28.12: [30721]: --> [7:CONNECT]
Dec 01 17:25:28.12: [30721]: <-- data [23]
Dec 01 17:25:28.12: [30721]: <-- data [2]
Dec 01 17:25:28.95: [30721]: --> [7:CONNECT]
Dec 01 17:25:28.95: [30721]: <-- data [10]
Dec 01 17:25:28.95: [30721]: <-- data [2]
Dec 01 17:25:29.49: [30721]: --> [2:OK]
Dec 01 17:25:29.49: [30721]: <-- [9:AT+FRH=3\r]
Dec 01 17:25:36.49: [30721]: --> [0:]
Dec 01 17:25:36.49: [30721]: MODEM <Empty line>
Dec 01 17:25:36.49: [30721]: <-- data [1]
Dec 01 17:25:36.54: [30721]: --> [2:OK]
Dec 01 17:25:36.54: [30721]: DELAY 1500 ms
Dec 01 17:25:38.04: [30721]: <-- [9:AT+FTH=3\r]
Dec 01 17:25:38.12: [30721]: --> [7:CONNECT]
Dec 01 17:25:38.12: [30721]: <-- data [32]
Dec 01 17:25:38.12: [30721]: <-- data [2]
Dec 01 17:25:40.14: [30721]: --> [7:CONNECT]
Dec 01 17:25:40.14: [30721]: <-- data [23]
Dec 01 17:25:40.14: [30721]: <-- data [2]
Dec 01 17:25:40.97: [30721]: --> [7:CONNECT]
Dec 01 17:25:40.97: [30721]: <-- data [10]
Dec 01 17:25:40.97: [30721]: <-- data [2]
Dec 01 17:25:41.52: [30721]: --> [2:OK]
Dec 01 17:25:41.52: [30721]: <-- [9:AT+FRH=3\r]
Dec 01 17:25:48.52: [30721]: --> [0:]
Dec 01 17:25:48.52: [30721]: MODEM <Empty line>
Dec 01 17:25:48.52: [30721]: <-- data [1]
Dec 01 17:25:48.57: [30721]: --> [2:OK]
Dec 01 17:25:48.57: [30721]: DELAY 1500 ms
Dec 01 17:25:50.07: [30721]: <-- [9:AT+FTH=3\r]
Dec 01 17:25:50.15: [30721]: --> [7:CONNECT]
Dec 01 17:25:50.15: [30721]: <-- data [32]
Dec 01 17:25:50.15: [30721]: <-- data [2]
Dec 01 17:25:52.17: [30721]: --> [7:CONNECT]
Dec 01 17:25:52.17: [30721]: <-- data [23]
Dec 01 17:25:52.17: [30721]: <-- data [2]
Dec 01 17:25:53.00: [30721]: --> [7:CONNECT]
Dec 01 17:25:53.00: [30721]: <-- data [10]
Dec 01 17:25:53.00: [30721]: <-- data [2]
Dec 01 17:25:53.55: [30721]: --> [2:OK]
Dec 01 17:25:53.55: [30721]: <-- [9:AT+FRH=3\r]
Dec 01 17:26:00.55: [30721]: --> [0:]
Dec 01 17:26:00.55: [30721]: MODEM <Empty line>
Dec 01 17:26:00.55: [30721]: <-- data [1]
Dec 01 17:26:00.60: [30721]: --> [2:OK]
Dec 01 17:26:00.60: [30721]: DELAY 1500 ms
Dec 01 17:26:02.10: [30721]: <-- [9:AT+FTH=3\r]
Dec 01 17:26:02.18: [30721]: --> [7:CONNECT]
Dec 01 17:26:02.18: [30721]: <-- data [32]
Dec 01 17:26:02.18: [30721]: <-- data [2]
Dec 01 17:26:04.20: [30721]: --> [7:CONNECT]
Dec 01 17:26:04.20: [30721]: <-- data [23]
Dec 01 17:26:04.20: [30721]: <-- data [2]
Dec 01 17:26:05.03: [30721]: --> [7:CONNECT]
Dec 01 17:26:05.03: [30721]: <-- data [10]
Dec 01 17:26:05.03: [30721]: <-- data [2]
Dec 01 17:26:05.58: [30721]: --> [2:OK]
Dec 01 17:26:05.58: [30721]: <-- [9:AT+FRH=3\r]
Dec 01 17:26:12.58: [30721]: --> [0:]
Dec 01 17:26:12.58: [30721]: MODEM <Empty line>
Dec 01 17:26:12.58: [30721]: <-- data [1]
Dec 01 17:26:12.63: [30721]: --> [2:OK]
Dec 01 17:26:12.63: [30721]: RECV FAX: No answer (T.30 T1 timeout)
Dec 01 17:26:12.63: [30721]: RECV FAX: end
Dec 01 17:26:12.64: [30721]: SESSION END
   



Project hosted by iFAX Solutions