Re: [hylafax-users] Problem with hylafax

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Andi Limberger wrote:

> Nov 27 23:06:39.11: [29340]: RECV send PPR (partial page request)
> Nov 27 23:06:39.11: [29340]: <-- [10:AT+FRM=96\r]
> Nov 27 23:06:39.78: [29340]: --> [7:CONNECT]
> Nov 27 23:06:39.88: [29340]: HDLC frame not byte-oriented.  Trailing byte: 0xfc
> Nov 27 23:06:39.89: [29340]: Bad HDLC terminating flag received.
> Nov 27 23:06:39.89: [29340]: Bad HDLC terminating flag received.
> Nov 27 23:06:39.89: [29340]: Bad HDLC terminating flag received.
> Nov 27 23:06:39.89: [29340]: HDLC frame not byte-oriented.  Trailing byte: 0xfc
> Nov 27 23:06:39.89: [29340]: Bad HDLC terminating flag received.
> Nov 27 23:06:40.00: [29340]: Bad HDLC terminating flag received.
> Nov 27 23:06:40.00: [29340]: Bad HDLC terminating flag received.
> Nov 27 23:06:40.00: [29340]: Bad HDLC terminating flag received.
> Nov 27 23:06:40.32: [29340]: HDLC frame not byte-oriented.  Trailing byte: 0xf8
> Nov 27 23:06:40.74: [29340]: RECV received frame number 72
> Nov 27 23:06:40.74: [29340]: RECV frame FCS check failed
> Nov 27 23:06:40.96: [29340]: HDLC frame not byte-oriented.  Trailing byte: 0
> Nov 27 23:06:41.29: [29340]: Bad HDLC terminating flag received.
> Nov 27 23:06:41.61: [29340]: RECV received frame number 78
> Nov 27 23:06:41.61: [29340]: RECV frame FCS check failed
> Nov 27 23:06:41.75: [29340]: RECV assumed RCP frame with block end
> Nov 27 23:06:41.75: [29340]: --> [10:NO CARRIER]
> Nov 27 23:06:41.75: [29340]: <-- [9:AT+FRH=3\r]
> Nov 27 23:06:44.77: [29340]: --> [7:CONNECT]
> Nov 27 23:06:49.78: [29340]: <-- data [1]
> Nov 27 23:06:49.79: [29340]: --> [2:OK]

The modem thinks that the line is really "noisy"... there's a lot of 
interference.

What kind of phone line is this?  Do you hear crackles if you lift the 
receiver and call some other number?

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*