Re: [hylafax-users] Incoming faxes routing based on called number

["Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

I don't know the AT commands for your modem (Linuxant can help you with
these details)... here's a brief overview of what you are trying to achieve
(using one of our modems);

http://www.hylafax.org/archive/2005-09/msg00377.php

Regards

ANDREW RINALDI
Mainpine Support
USA +1 718 701 2422 | Asia/Europe +44 1225 436137 
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com 

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Thanos A.
Sent: 28 November 2005 12:31
To: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Incoming faxes routing based on called number

> If you have a PABX connected to your T1/PRI then that should be able 
> to do the DID to DTMF conversion for you.  If this is your setup then
probably the
> easiest thing to try is using minicom to test your setup before using 
> HylaFAX.  This will allow you to test the delivery of DTMF digits by
issuing
> AT commands to the modem.


Can you please post an example on how to use minicom to make some tests ? I
have a PABX (Panasonic KX-TD1232) connected to 5 BRI, and I'm sure I can get
DID (PABX is configured to route incoming calls based on DID...)

Thanks
A.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*