[hylafax-users] a question about fylafax usage

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] a question about fylafax usage
From: "Jeno pob" <jenopob@xxxxxxxxxxx>
Date: Sun, 27 Nov 2005 12:08:48 +0800

my hylafax log as follows:

v 26 00:19:12.51: [ 4034]: SESSION BEGIN 000000075 3364221850 Nov 26 00:19:12.51: [ 4034]: HylaFAX (tm) Version 4.2.3 Nov 26 00:19:12.51: [ 4034]: SEND FAX: JOB 52 DEST 0,64221850 COMMID 000000075 DEVICE '/dev/ttyS0' FROM 'root <root@ESR-LINUX-01>' USER root Nov 26 00:19:12.51: [ 4034]: <-- [12:AT+FCLASS=1\r] Nov 26 00:19:12.73: [ 4034]: --> [2:OK] Nov 26 00:19:12.73: [ 4034]: DIAL 0,64221850 Nov 26 00:19:12.73: [ 4034]: <-- [15:ATDT0,64221850\r] Nov 26 00:19:28.78: [ 4034]: --> [7:CONNECT] Nov 26 00:19:28.79: [ 4034]: --> [2:OK] Nov 26 00:19:28.79: [ 4034]: REMOTE NSF "86 00 CA 00 00 E4 01 C8 40 F0 03 18 80 00 00" Nov 26 00:19:28.79: [ 4034]: NSF remote fax equipment: unknown Nov 26 00:19:28.79: [ 4034]: <-- [9:AT+FRH=3\r] Nov 26 00:19:29.53: [ 4034]: --> [7:CONNECT] Nov 26 00:19:29.55: [ 4034]: --> [2:OK] Nov 26 00:19:29.55: [ 4034]: REMOTE CSI "08602164221850" Nov 26 00:19:29.55: [ 4034]: <-- [9:AT+FRH=3\r] Nov 26 00:19:29.91: [ 4034]: --> [7:CONNECT] Nov 26 00:19:29.92: [ 4034]: --> [2:OK] Nov 26 00:19:29.92: [ 4034]: REMOTE best rate 33600 bit/s Nov 26 00:19:29.92: [ 4034]: REMOTE max A4 page width (215 mm) Nov 26 00:19:29.92: [ 4034]: REMOTE max unlimited page length Nov 26 00:19:29.92: [ 4034]: REMOTE best vres 300 x 300 dpi Nov 26 00:19:29.92: [ 4034]: REMOTE format support: MH, MR, MMR Nov 26 00:19:29.92: [ 4034]: REMOTE supports T.30 Annex A, 256-byte ECM Nov 26 00:19:29.92: [ 4034]: REMOTE best 10 ms/scanline Nov 26 00:19:29.92: [ 4034]: USE 14400 bit/s Nov 26 00:19:29.92: [ 4034]: USE error correction mode Nov 26 00:19:29.92: [ 4034]: SEND file "docq/doc53.ps;c0" Nov 26 00:19:29.92: [ 4034]: USE A4 page width (215 mm) Nov 26 00:19:29.92: [ 4034]: USE unlimited page length Nov 26 00:19:29.92: [ 4034]: USE 3.85 line/mm Nov 26 00:19:29.92: [ 4034]: USE 2-D MMR Nov 26 00:19:29.92: [ 4034]: USE 0 ms/scanline Nov 26 00:19:29.92: [ 4034]: SEND training at v.17 14400 bit/s Nov 26 00:19:29.92: [ 4034]: <-- [9:AT+FRS=7\r] Nov 26 00:19:29.94: [ 4034]: --> [2:OK] Nov 26 00:19:29.94: [ 4034]: <-- [9:AT+FTH=3\r] Nov 26 00:19:29.96: [ 4034]: --> [7:CONNECT] Nov 26 00:19:29.96: [ 4034]: <-- data [23] Nov 26 00:19:29.96: [ 4034]: <-- data [2] Nov 26 00:19:29.99: [ 4034]: --> [7:CONNECT] Nov 26 00:19:29.99: [ 4034]: <-- data [7] Nov 26 00:19:29.99: [ 4034]: <-- data [2] Nov 26 00:19:33.38: [ 4034]: --> [2:OK] Nov 26 00:19:33.38: [ 4034]: <-- [9:AT+FTS=7\r] Nov 26 00:19:33.39: [ 4034]: --> [2:OK] Nov 26 00:19:33.39: [ 4034]: <-- [11:AT+FTM=145\r] Nov 26 00:19:33.49: [ 4034]: --> [7:CONNECT] Nov 26 00:19:33.49: [ 4034]: <-- data [1024] Nov 26 00:19:33.49: [ 4034]: <-- data [1024] Nov 26 00:19:33.49: [ 4034]: <-- data [652] Nov 26 00:19:33.49: [ 4034]: <-- data [2] Nov 26 00:19:36.98: [ 4034]: --> [2:OK] Nov 26 00:19:36.98: [ 4034]: <-- [9:AT+FRH=3\r] Nov 26 00:19:38.12: [ 4034]: --> [7:CONNECT] Nov 26 00:19:38.13: [ 4034]: --> [2:OK] Nov 26 00:19:38.13: [ 4034]: SEND training at v.17 12000 bit/s Nov 26 00:19:38.13: [ 4034]: <-- [9:AT+FRS=7\r] Nov 26 00:19:38.15: [ 4034]: --> [2:OK] Nov 26 00:19:38.15: [ 4034]: <-- [9:AT+FTH=3\r] Nov 26 00:19:38.17: [ 4034]: --> [7:CONNECT] Nov 26 00:19:38.17: [ 4034]: <-- data [23] Nov 26 00:19:38.17: [ 4034]: <-- data [2] Nov 26 00:19:38.20: [ 4034]: --> [7:CONNECT] Nov 26 00:19:38.20: [ 4034]: <-- data [7] Nov 26 00:19:38.20: [ 4034]: <-- data [2] Nov 26 00:19:41.58: [ 4034]: --> [2:OK] Nov 26 00:19:41.58: [ 4034]: <-- [9:AT+FTS=7\r] Nov 26 00:19:41.59: [ 4034]: --> [2:OK] Nov 26 00:19:41.59: [ 4034]: <-- [11:AT+FTM=121\r] Nov 26 00:19:41.69: [ 4034]: --> [7:CONNECT] Nov 26 00:19:41.69: [ 4034]: <-- data [1024] Nov 26 00:19:41.69: [ 4034]: <-- data [1024] Nov 26 00:19:41.69: [ 4034]: <-- data [202] Nov 26 00:19:41.69: [ 4034]: <-- data [2] Nov 26 00:19:45.15: [ 4034]: --> [2:OK] Nov 26 00:19:45.15: [ 4034]: <-- [9:AT+FRH=3\r] Nov 26 00:19:46.32: [ 4034]: --> [7:CONNECT] Nov 26 00:19:46.32: [ 4034]: --> [2:OK] Nov 26 00:19:46.32: [ 4034]: SEND training at v.17 9600 bit/s Nov 26 00:19:46.32: [ 4034]: <-- [9:AT+FRS=7\r] Nov 26 00:19:46.33: [ 4034]: --> [2:OK] Nov 26 00:19:46.33: [ 4034]: <-- [9:AT+FTH=3\r] Nov 26 00:19:46.35: [ 4034]: --> [7:CONNECT] Nov 26 00:19:46.35: [ 4034]: <-- data [23] Nov 26 00:19:46.35: [ 4034]: <-- data [2] Nov 26 00:19:46.38: [ 4034]: --> [7:CONNECT] Nov 26 00:19:46.38: [ 4034]: <-- data [7] Nov 26 00:19:46.38: [ 4034]: <-- data [2] Nov 26 00:19:49.76: [ 4034]: --> [2:OK] Nov 26 00:19:49.76: [ 4034]: <-- [9:AT+FTS=7\r] Nov 26 00:19:49.77: [ 4034]: --> [2:OK] Nov 26 00:19:49.77: [ 4034]: <-- [10:AT+FTM=97\r] Nov 26 00:19:49.87: [ 4034]: --> [7:CONNECT] Nov 26 00:19:49.87: [ 4034]: <-- data [1024] Nov 26 00:19:49.87: [ 4034]: <-- data [776] Nov 26 00:19:49.87: [ 4034]: <-- data [2] Nov 26 00:19:53.35: [ 4034]: --> [2:OK] Nov 26 00:19:53.35: [ 4034]: <-- [9:AT+FRH=3\r] Nov 26 00:19:54.50: [ 4034]: --> [7:CONNECT] Nov 26 00:19:54.50: [ 4034]: --> [2:OK] Nov 26 00:19:54.50: [ 4034]: SEND training at v.29 9600 bit/s Nov 26 00:19:54.50: [ 4034]: <-- [9:AT+FRS=7\r] Nov 26 00:19:54.51: [ 4034]: --> [2:OK] Nov 26 00:19:54.51: [ 4034]: <-- [9:AT+FTH=3\r] Nov 26 00:19:54.53: [ 4034]: --> [7:CONNECT] Nov 26 00:19:54.53: [ 4034]: <-- data [23] Nov 26 00:19:54.53: [ 4034]: <-- data [2] Nov 26 00:19:54.56: [ 4034]: --> [7:CONNECT] Nov 26 00:19:54.56: [ 4034]: <-- data [7] Nov 26 00:19:54.56: [ 4034]: <-- data [2] Nov 26 00:20:02.11: [ 4034]: --> [0:] Nov 26 00:20:02.11: [ 4034]: MODEM <Empty line> Nov 26 00:20:02.11: [ 4034]: Error sending T.30 prologue frames Nov 26 00:20:02.11: [ 4034]: SEND training at v.29 7200 bit/s Nov 26 00:20:02.11: [ 4034]: <-- [9:AT+FRS=7\r] Nov 26 00:20:32.11: [ 4034]: MODEM <Timeout> Nov 26 00:20:32.11: [ 4034]: Failure to receive silence. Nov 26 00:20:32.11: [ 4034]: Error sending T.30 prologue frames Nov 26 00:20:32.11: [ 4034]: SEND training at v.27ter 4800 bit/s Nov 26 00:20:32.11: [ 4034]: <-- [9:AT+FRS=7\r] Nov 26 00:21:02.11: [ 4034]: MODEM <Timeout> Nov 26 00:21:02.11: [ 4034]: Failure to receive silence. Nov 26 00:21:02.11: [ 4034]: Error sending T.30 prologue frames Nov 26 00:21:02.11: [ 4034]: SEND training at v.27ter fallback mode 2400 bit/s Nov 26 00:21:02.11: [ 4034]: <-- [9:AT+FRS=7\r] Nov 26 00:21:32.11: [ 4034]: MODEM <Timeout> Nov 26 00:21:32.11: [ 4034]: Failure to receive silence. Nov 26 00:21:32.11: [ 4034]: Error sending T.30 prologue frames Nov 26 00:21:32.11: [ 4034]: TRAINING failed Nov 26 00:21:32.11: [ 4034]: <-- [9:AT+FTH=3\r] Nov 26 00:21:39.66: [ 4034]: --> [0:] Nov 26 00:21:39.66: [ 4034]: <-- [5:ATH0\r] Nov 26 00:21:44.66: [ 4034]: MODEM <Timeout> Nov 26 00:21:44.66: [ 4034]: SESSION END

and I don't know what happend ,and at the fax machine appears COMM. ERROR, and I execute the command "faxstat -d" which shows the sendfax list ,and the fax which I sended just , "TTS status "appers the information as "NO response to PPS repeat" so please tell me what about the error ,and the config setting Thank you very much !

_________________________________________________________________ 免费下载 MSN Explorer: http://explorer.msn.com/lccn/


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Follow-Ups:
- Re: [hylafax-users] a question about fylafax usage
  - From: Lee Howard

Prev by Date: Re: [hylafax-users] modem/card with analog ETSI Caller ID support
Next by Date: [hylafax-users] Troubleshooting Troubles
Previous by thread: Re: [hylafax-users] Wich modem to buy ?
Next by thread: Re: [hylafax-users] a question about fylafax usage
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions