HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
[hylafax-users] R: R: Implentation of DTMF DID with Hylafax 4.2.3
After sent ATA command, the modem answer to call, send message VCON and PABX
intercept signal and send DTMF without waits.
I try to install new beta version of Hylafax and report you the result.
Tks
Taverni
-----Messaggio originale-----
Da: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] Per conto di Lee Howard
Inviato: venerdì 25 novembre 2005 7.17
A: taverni@xxxxx
Cc: hylafax-users@xxxxxxxxxxx
Oggetto: Re: [hylafax-users] R: Implentation of DTMF DID with Hylafax 4.2.3
taverni@xxxxxx wrote:
>AT#CLS=8 <- send AT command to modem to enable Voice mode
>OK
>.h
>RING !Call modem and modem recognize call and print RING
>
>RING
>ATA <- sent ATA command to modem to answer call
>VCON
>.#.0.0.#.4.7.7.#.# -> Pabx send DTMF codes
>----------------------------------------------------------------------
>
>
>Nov 24 09:57:34 HylafaxTest FaxGetty[6423]: --> [4:RING]
>Nov 24 09:57:34 HylafaxTest FaxGetty[6423]: <-- [13:AT#CLS=8;ATA\r]
>Nov 24 09:57:34 HylafaxTest FaxGetty[6423]: --> [2:h]
>Nov 24 09:57:34 HylafaxTest FaxGetty[6423]: --> [4:VCON]
>Nov 24 09:57:37 HylafaxTest FaxGetty[6423]: MODEM TIMEOUT: reading line
from
>
How much time is passing before the DTMF tones are dialed?
In any case, you may want to try 4.2.3.1 from
http://hylafax.sourceforge.net to see if the SHIELDED_DTMF modifications
there are of any benefit to this.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*