[hylafax-users] "Unspecified Transmit Phase C" error in Debian Sarge

[Leszek Dubiel <Leszek.Dubiel@xxxxxxxxxxxxxxx>]

I have had excellent configuration of Hylafax 4.1.1 and everythink 
WORKED ok.

Recently I have upgraded from Woody to Sarge and I started to get 
"Unspecified Transmit Phase C" error while sending pages.

I've been googling quite a long time, but didn't manage to find a 
solution, so I ask you for help.


-------------------------------------------
SERVER:    HylaFAX version 4.2.1 built Mon Oct  3 11:54:26 UTC 2005 for 
i686-pc-linux-gnu
MODEM:     U.S. Robotics 56K FAX EXT Rev. 11.16.39


--------------------------------------------
CONFIGURATION:  (config.ttyS1)

CountryCode:            48
AreaCode:               18
FAXNumber:              +48182677922
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         0xFFFFF
RecvFileMode:           0640
LogFileMode:            0640
DeviceMode:             0660
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-r -b %l"
LocalIdentifier:        "Dubiel Vitrum"
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
PercentGoodLines:       0
MaxConsecutiveBadLines: 0
JobReqNoCarrier:        15
ModemType:              Class1
ModemRate:              19200
ModemFlowControl:       xonxoff
ModemSetupDTRCmd:       ATS13=1&D2
ModemSetupDCDCmd:       AT&C1
ModemNoFlowCmd:         AT&H0&I0&R1
ModemHardFlowCmd:       AT&H1&I0&R2
ModemSoftFlowCmd:       AT&H2&I2&R1
ModemMfrQueryCmd:       !USR
ModemModelQueryCmd:     ATI3
ModemRevQueryCmd:       ATI7
Class1NFLOCmd:          AT&H0&I0&R1
Class1HFLOCmd:          AT&H1&I0&R2
Class1SFLOCmd:          ""
ModemSetupAACmd:        AT+FCLASS=0
ModemAnswerCmd:         AT+FCLASS=1A
Class2NRCmd:    AT+FNR=1,1,1,0


---------------------------------------------------
SESSION LOG:  (only part of file c000034816, Uspecified Transmit Phase C 
error is 11th line from the bottom):

lis 14 14:26:29.64: [19304]: SESSION BEGIN 000034816 481890228433702
lis 14 14:26:29.64: [19304]: HylaFAX (tm) Version 4.2.1
lis 14 14:26:29.64: [19304]: SEND FAX: JOB 5463 DEST 90228433702 COMMID 000034816 DEVICE '/dev/ttyS1'
lis 14 14:26:29.64: [19304]: STATE CHANGE: RUNNING -> SENDING
lis 14 14:26:29.64: [19304]: MODEM input buffering enabled
lis 14 14:26:29.64: [19304]: Apply DialString rules to "90228433702"
lis 14 14:26:29.64: [19304]: --> return result "90228433702"
lis 14 14:26:29.64: [19304]: <-- [12:AT+FCLASS=1\r]
lis 14 14:26:29.88: [19304]: --> [2:OK]
lis 14 14:26:29.88: [19304]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
lis 14 14:26:29.88: [19304]: DIAL 90228433702
lis 14 14:26:29.88: [19304]: <-- [16:ATDT90228433702\r]
lis 14 14:26:41.69: [19304]: --> [7:CONNECT]
lis 14 14:26:41.69: [19304]: MODEM input buffering disabled
lis 14 14:26:43.44: [19304]: --> HDLC<42:FF C0 04 00 00 70 00 00 00 69 F0 80 C0 00 08 A0 40 A9 13 10 80 92 40 72 92 A2 32 CA A2 72 FA 0A F2 32 CA D2 82 FA CA C0 95 E4>
lis 14 14:26:43.44: [19304]: --> [2:OK]
lis 14 14:26:43.44: [19304]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 03 00 10 05 02 95 C8 08 01 49 02 4E 49 45 4C 53 45 4E 5F 50 4F 4C 53 4B 41 5F 53 03"
lis 14 14:26:43.44: [19304]: NSF remote fax equipment: Panasonic KX-F230 or KX-FT21 or ...
lis 14 14:26:43.44: [19304]: NSF remote station ID: "NIELSEN_POLSKA_S"
lis 14 14:26:43.44: [19304]: <-- [9:AT+FRH=3\r]
lis 14 14:26:43.46: [19304]: --> [7:CONNECT]
lis 14 14:26:44.19: [19304]: --> HDLC<25:FF C0 02 8C CC 6C 1C CC AC 1C 04 4C 4C 04 1C 2C D4 04 04 04 04 04 04 FE 61>
lis 14 14:26:44.19: [19304]: --> [2:OK]
lis 14 14:26:44.19: [19304]: REMOTE CSI "+48 22 8538631"
lis 14 14:26:44.19: [19304]: <-- [9:AT+FRH=3\r]
lis 14 14:26:44.21: [19304]: --> [7:CONNECT]
lis 14 14:26:44.56: [19304]: --> HDLC<11:FF C8 01 00 73 1D 01 01 88 03 AE>
lis 14 14:26:44.56: [19304]: --> [2:OK]
lis 14 14:26:44.56: [19304]: REMOTE best rate 9600 bit/s
lis 14 14:26:44.56: [19304]: REMOTE max A4 page width (215 mm)
lis 14 14:26:44.56: [19304]: REMOTE max unlimited page length
lis 14 14:26:44.56: [19304]: REMOTE best vres 15.4 line/mm
lis 14 14:26:44.56: [19304]: REMOTE best format 2-D MR
lis 14 14:26:44.56: [19304]: REMOTE best 20 ms, 10 ms/scanline
lis 14 14:26:44.56: [19304]: USE 9600 bit/s
lis 14 14:26:44.56: [19304]: USE 20 ms, 10 ms/scanline
lis 14 14:26:44.56: [19304]: SEND file "docq/doc5206.ps;41"
lis 14 14:26:44.56: [19304]: USE A4 page width (215 mm)
lis 14 14:26:44.56: [19304]: USE unlimited page length
lis 14 14:26:44.56: [19304]: USE 7.7 line/mm
lis 14 14:26:44.56: [19304]: USE 2-D MR
lis 14 14:26:44.56: [19304]: SEND training at v.29 9600 bit/s
lis 14 14:26:44.56: [19304]: <-- [9:AT+FTH=3\r]
lis 14 14:26:44.76: [19304]: --> [7:CONNECT]
lis 14 14:26:44.76: [19304]: <-- HDLC<23:FF C0 C2 B6 AE 4E 2E 96 6A 04 36 A6 96 46 AE 22 04 04 04 04 04 04 04>
lis 14 14:26:44.76: [19304]: <-- data [23]
lis 14 14:26:44.76: [19304]: <-- data [2]
lis 14 14:26:44.79: [19304]: --> [7:CONNECT]
lis 14 14:26:44.79: [19304]: <-- HDLC<6:FF C8 C1 00 63 10>
lis 14 14:26:44.79: [19304]: <-- data [6]
lis 14 14:26:44.79: [19304]: <-- data [2]
lis 14 14:26:46.74: [19304]: --> [2:OK]
lis 14 14:26:46.74: [19304]: <-- [9:AT+FTS=7\r]
lis 14 14:26:46.82: [19304]: --> [2:OK]
lis 14 14:26:46.82: [19304]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
lis 14 14:26:46.82: [19304]: <-- [10:AT+FTM=96\r]
lis 14 14:26:47.14: [19304]: --> [7:CONNECT]
lis 14 14:26:47.14: [19304]: <-- data [1024]
lis 14 14:26:47.14: [19304]: <-- data [776]
lis 14 14:26:47.14: [19304]: <-- data [2]
lis 14 14:26:48.68: [19304]: --> [2:OK]
lis 14 14:26:48.68: [19304]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
lis 14 14:26:48.68: [19304]: <-- [9:AT+FRH=3\r]
lis 14 14:26:50.04: [19304]: --> [7:CONNECT]
lis 14 14:26:51.01: [19304]: --> HDLC<5:FF C8 21 57 BE>
lis 14 14:26:51.01: [19304]: --> [2:OK]
lis 14 14:26:51.01: [19304]: TRAINING succeeded
lis 14 14:26:51.01: [19304]: DELAY 200 ms
lis 14 14:26:51.21: [19304]: <-- [10:AT+FTM=96\r]
lis 14 14:26:51.56: [19304]: --> [7:CONNECT]
lis 14 14:26:51.56: [19304]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
lis 14 14:26:51.56: [19304]: SEND begin page
lis 14 14:26:51.56: [19304]: <-- data [1024]
............ [ this is what I removed from log file ] ................................
lis 14 14:27:46.73: [19304]: <-- data [1024]
lis 14 14:27:46.73: [19304]: <-- data [1025]
lis 14 14:27:48.73: [19304]: <-- data [1026]
lis 14 14:27:48.73: [19304]: <-- data [895]
lis 14 14:27:48.73: [19304]: SENT 20351 bytes of data
lis 14 14:27:48.73: [19304]: SEND 2D RTC
lis 14 14:27:48.73: [19304]: <-- data [30]
lis 14 14:27:48.73: [19304]: <-- data [2]
lis 14 14:27:48.73: [19304]: SEND end page
lis 14 14:28:48.72: [19304]: MODEM TIMEOUT: reading line from modem
lis 14 14:28:48.72: [19304]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
lis 14 14:28:48.72: [19304]: Unspecified Transmit Phase C error
lis 14 14:28:48.72: [19304]: <-- [9:AT+FTH=3\r]
lis 14 14:28:56.27: [19304]: --> [0:]
lis 14 14:28:56.27: [19304]: MODEM TIMEOUT: sending HDLC frame
lis 14 14:28:56.27: [19304]: MODEM input buffering enabled
lis 14 14:28:56.27: [19304]: <-- [5:ATH0\r]
lis 14 14:29:01.27: [19304]: MODEM TIMEOUT: reading line from modem
lis 14 14:29:01.27: [19304]: MODEM <Timeout>
lis 14 14:29:01.27: [19304]: MODEM set DTR OFF
lis 14 14:29:01.27: [19304]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
lis 14 14:29:01.27: [19304]: SESSION END







____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*