HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
Re: [hylafax-users] Failure to raise V.21 transmission carrier.
Thanks for the speedy reply!
When I looked into setting this fax server up I got that old modem from
eBay for a whopping $15. I was under the impression USR was a decent
brand to purchase and, in fact, used to use a USRCourier before the
"broadband revolution" hit.
I've looked at the modem info pages on the hylafax.org site and it seems
the recommended modems are pretty pricey. Are there any consumer-level
modems you would recommend? I'd like to keep this below the $100 level
if possible.
Is this modem reset problem likely to occur frequently with this USR
Sportster?
Thanks muchly
Paul
-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
Sent: Tuesday, November 01, 2005 5:54 PM
To: Paul Smith
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Failure to raise V.21 transmission carrier.
Paul Smith wrote:
>Nov 01 14:14:13.16: [ 3904]: <-- [9:AT+FTH=3\r]
>Nov 01 14:14:43.17: [ 3904]: MODEM <Timeout>
>Nov 01 14:14:43.17: [ 3904]: RECV FAX (000000026):
>recvq/fax000000019.tif from xxx xxx xxxx, route to <unspecified>, 0
>pages in 0:50
>Nov 01 14:14:43.17: [ 3904]: RECV FAX: Failure to raise V.21
>transmission carrier.
>Nov 01 14:14:43.17: [ 3904]: <-- [9:AT+FTH=3\r]
>Nov 01 14:14:43.30: [ 3904]: --> [8:AT+FTH=3]
>
>
Your modem reset itself in the middle of a fax session.
>Nov 1 14:14:55 hector FaxGetty[3904]: MODEM USR U.S. Robotics 56K FAX
>
It's one of the "bonus" features that come with USR modems. ;-)
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*