Re: [hylafax-users] hylafax ISDN fax redistribution

[Bodo Meissner <bodo@xxxxxxxxx>]

Am 2005.11.01 10:34 schrieb(en) Aleksander Buczkowski:

> I have got Asus passive pci ISDN Card with HFC-S A chipset onboard.

You can use an ISDN card with Hylafax if it has a CAPI interface or a  
modem like interface. Either of these has to be provided by the card  
manufacturer.

> I have one ISDN line and 20 fax receivers.

What do you mean with "one ISDN line"? I assume BRI because it's a  
passive card.
Is your BRI in point-to-point or point-to-multipoint mode?

In point-to-multipoint mode you have max. 10 MSNs, so you could  
distribute to 10 receivers based on the called number. In p-t-p mode it  
would be possible to assign a separate DID number to every receiver.

In p-t-mp mode you would have to use two BRIs and two ISDN cards.  
(Check your documentation if it's possible to use more than one passive  
card.)

> I read an article about DID number in case of ISDN - is it helpful in
> this case?

If you have a card with CAPI interface and use capi4hylafax you can use  
DID or multiple MSNs. (But with capi4hylafax you cannot use all  
features of Hylafax.)
If you have a modem-like interface it depends on the manufacturer's  
driver software.


Bodo

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*