[hylafax-users] MainPine & Hylafax Problem with hunt group update

[Tom Miller <tom@xxxxxxxxxxxxxx>]

Lee

I run faxaddmodem again on ttyS7, ttyS6 and ttyS10 (three 
line in a hunt group).  This time I change the FAXNumber:
entry into a real phone number instead the fake one (I don't
think this is the cause of it, but again I don't HylaFax that 
well either).  Restart faxgetty for all three devices.  Then 
run tail -f messages

I can see 
STATE CHANGE: LISTENING -> ANSWERING  
for two devices.  But not the third device so I still have to 
figure out what else might miss configured.


I know for certain that I only chance three parameters while
running the faxaddmodem:
AreaCode:               806
FAXNumber:              488.8700
ServerTracing:          0xFFF

I kept everything else as default except the three parameters 
above.

So it works.  However, I do not understand why it did not 
work before.  What part did I missed or missed configured? 

So my questions is.  

If I have 8 devices (modem) While running faxaddmodem.

1.
What parameters can I keep as default (by hit enter and not 
enter any new value) for all 8 devices ?  and 

2.
What parameters I must change (have to be different) for 8 
devices?

3.
What other configuration might need to be different for all 8 
devices?



Thank you so much for respond to my issues and questions.


Tom








>It's probably your configuration.  I would double-check your 
config 
>files and pay particular attention to your answering method 
>(RingsBeforeAnswer, CallIDAnswerLength, etc.).
>
>If you still don't get it solved, set ServerTracing in your 
modem config 
>file to 0xFFF, restart faxgetty, and then call in to the 
modem.  Then 
>take a look at the FaxGetty logs in the server log 
(/var/log/messages) 
>and if that doesn't make sense to you then post them here.
>
>Lee.
>
>
>____________________ HylaFAX(tm) Users Mailing List 
_______________________
>  To subscribe/unsubscribe, click 
http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-
request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail 
sales@xxxxxxxxx*
>

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*