[hylafax-users] MainPine Modem Problem

[Tom Miller <tom@xxxxxxxxxxxxxx>]

Hylafax 4.2.2,  MainPine Oct+ run on RedHat ES 3.0

We talked to the telco company today.  They said there is no
special features on those line as compare to other line.
Except the working line is the single line and the other none 
working line are in a hunt group.  

We have two hunt group we had tried out both and neither of 
them were work. Is your modem having problem of detecting and 
picking up hunted group? 


Is there a special setting for hunt group?

Thanks,

Tom

>
>
>---- Original message ----
>>Date: Sun, 23 Oct 2005 12:52:41 +0100
>>From: "support" <support@xxxxxxxxxxxx>  
>>Subject: RE: [hylafax-users] Urgent - help  
>>To: <tom@xxxxxxxxxxxxxx>, "'Lee Howard'" 
><faxguy@xxxxxxxxxxxxxxxx>
>>Cc: <hylafax-users@xxxxxxxxxxx>
>>
>> 
>>Hi Tom.
>>
>>Can you tell us a bit about your setup ?  How are the lines 
>delivered to you
>>?  Is the OCTO+ connected via a PABX or straight from the 
>telco ?  Do any of
>>the lines have supplementary services enabled (Call 
Waiting, 
>etc.) ?  Which
>>country are you in ?
>>
>>Do both send and receive fail on a 'bad' line ?
>>
>>When you "moved the working phone line" did you just unplug 
>the RJ11
>>connector from the OCTO+ and move it to a different  port 
on 
>the board ?
>>Are you using identical RJ11 cables ?  The ones supplied 
>with the board ? 
>>
>>Have you tried using minicom ?  What does the modem say if 
>you try
>>ATDT<phonenumber> on a 'bad' line ?
>>
>>FYI, all ports on the OCTO+ have identical hardware.... 
>Therefore, if the
>>behaviour is different it will be the lines and/or 
>configuration.
>>
>>Regards
>>
>>ANDREW RINALDI
>>Mainpine Support Manager
>>USA +1 718 701 2422 | Asia/Europe +44 1225 436137 
>>andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com
>>
>>-----Original Message-----
>>From: Tom Miller [mailto:tom@xxxxxxxxxxxxxx] 
>>Sent: 23 October 2005 04:48
>>To: Lee Howard
>>Cc: hylafax-users@xxxxxxxxxxx
>>Subject: Re: [hylafax-users] Urgent - help
>>
>>Lee,
>>
>>All 8 faxgetty are running.  I also verify by moved the 
only 
>working phone
>>line to individual port and tried to send fax to them and 
>they are working.
>>
>>
>>Could it be the other phone line have different codec or 
>different ??? than
>>the one that working?
>>
>>One thing to keep in mind is the other lines work fine on 
>different fax
>>machines.
>>
>>It seems the MainPine modem interpreted the working line 
>different than
>>other three non-working lines.  However, these three non-
>working lines are
>>working fine with our other 
>>fax machine.   Am I on the right track?
>>
>>Thanks much for you respond
>>
>>Tom
>>
>>
>>
>>---- Original message ----
>>>Date: Sat, 22 Oct 2005 13:40:32 -0700
>>>From: Lee Howard <faxguy@xxxxxxxxxxxxxxxx>
>>>Subject: Re: [hylafax-users] Urgent - help
>>>To: tom@xxxxxxxxxxxxxx
>>>Cc: hylafax-users@xxxxxxxxxxx
>>>
>>>Tom Miller wrote:
>>>
>>>>Would someone tell me how to get Hylafax to answer more 
>than one modem 
>>>>at a time please.
>>>>
>>>
>>>There's nothing to do.  If you have a faxgetty running on
>>each port with 
>>>RingsBeforeAnswer set to something other than 0, then it
>>will answer 
>>>when it gets the RingsBeforeAnswer number of RINGs from the
>>modem.
>>>
>>>Lee.
>>
>>
>
>____________________ HylaFAX(tm) Users Mailing List 
_______________________
>  To subscribe/unsubscribe, click 
http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-
request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail 
sales@xxxxxxxxx*
>

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*