HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] modem ACL per user



Martin Vit wrote:

I need this, because i've 10 IAX modems witch specific callerID.
If i could assing specific callerID which user cannot override then i can use any IAX modem for outgouing faxes. This is not possible (if i do not missed something)


If all you're trying to do is to set the Caller*ID information then you can do that in your Asterisk PBX. Think about prefixing your dialstring with a specific code per-user... the PBX uses this information to set Caller*ID and to produce a true dialstring.

Most modems don't have a way to set the Caller*ID values, so for the most part you'll have to do something similar to the above in order to reuse modems with different users. IAXmodem will eventually have the capability to set the Caller*ID information with AT commands, but most modems don't and won't ever likely.

Trying to set up one modem per user would be an acceptable approach if HylaFAX were able to allocate modems that way, but I think that if you were to consider the possibility of hundreds of users you'd find that approach would be burdensome.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions