HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] facsimile not received but done



In my environment I have an hylafax server that sometime receive a fax,
but some some reason it fail (in this case for too bad lines), but the
very strange thing is that the sender machine "understand" that all is
ok (the sender send me its print report where I can read that it's all
ok, but hylafax say me that isn't all ok!)

Is there a solution for this?

Thanks,
Michele


Sep 28 12:36:50.59: [24089]: --> [7:CONNECT] Sep 28 12:36:50.59: [24089]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0' Sep 28 12:36:50.59: [24089]: RECV FAX: begin Sep 28 12:36:51.60: [24089]: --> [7:CONNECT] Sep 28 12:36:52.79: [24089]: --> [2:OK] Sep 28 12:36:52.79: [24089]: <-- [9:AT+FRH=3\r] Sep 28 12:36:53.25: [24089]: --> [7:CONNECT] Sep 28 12:36:54.68: [24089]: --> [2:OK] Sep 28 12:36:54.69: [24089]: REMOTE TSI "" Sep 28 12:36:54.69: [24089]: <-- [9:AT+FRH=3\r] Sep 28 12:36:54.70: [24089]: --> [7:CONNECT] Sep 28 12:36:54.95: [24089]: --> [2:OK] Sep 28 12:36:54.95: [24089]: REMOTE wants 9600 bit/s Sep 28 12:36:54.95: [24089]: REMOTE wants page width 1728 pixels in 215 mm Sep 28 12:36:54.95: [24089]: REMOTE wants unlimited page length Sep 28 12:36:54.95: [24089]: REMOTE wants 3.85 line/mm Sep 28 12:36:54.95: [24089]: REMOTE wants 2-D MR Sep 28 12:36:54.95: [24089]: RECV training at v.29 9600 bit/s Sep 28 12:36:54.95: [24089]: <-- [10:AT+FRM=96\r] Sep 28 12:36:55.26: [24089]: --> [7:CONNECT] Sep 28 12:36:56.82: [24089]: RECV: TCF 1855 bytes, 2% non-zero, 1806 zero-run Sep 28 12:36:56.82: [24089]: --> [10:NO CARRIER] Sep 28 12:36:56.82: [24089]: DELAY 75 ms Sep 28 12:36:56.90: [24089]: TRAINING succeeded Sep 28 12:36:56.90: [24089]: <-- [9:AT+FTH=3\r] Sep 28 12:36:56.91: [24089]: --> [7:CONNECT] Sep 28 12:36:58.37: [24089]: --> [2:OK] Sep 28 12:36:58.37: [24089]: <-- [10:AT+FRM=96\r] Sep 28 12:36:59.25: [24089]: --> [7:CONNECT] Sep 28 12:36:59.25: [24089]: RECV: begin page Sep 28 12:37:23.24: [24089]: RECV: 1206 total lines, 7 bad lines, 7 consecutive bad lines Sep 28 12:37:23.25: [24089]: RECV: REJECT page quality, 7-line run (max 5) Sep 28 12:37:23.25: [24089]: RECV: end page Sep 28 12:37:23.35: [24089]: --> [10:NO CARRIER] Sep 28 12:37:23.35: [24089]: <-- [9:AT+FRH=3\r] Sep 28 12:37:23.74: [24089]: --> [7:CONNECT] Sep 28 12:37:24.46: [24089]: --> [2:OK] Sep 28 12:37:24.46: [24089]: RECV recv EOP (no more pages or documents) Sep 28 12:37:24.46: [24089]: <-- [9:AT+FRS=7\r] Sep 28 12:37:24.58: [24089]: --> [2:OK] Sep 28 12:37:24.58: [24089]: <-- [9:AT+FTH=3\r] Sep 28 12:37:24.59: [24089]: --> [7:CONNECT] Sep 28 12:37:26.05: [24089]: --> [2:OK] Sep 28 12:37:26.05: [24089]: RECV send RTN (retrain negative) Sep 28 12:37:26.05: [24089]: <-- [9:AT+FRH=3\r] Sep 28 12:37:26.50: [24089]: --> [7:CONNECT] Sep 28 12:37:27.40: [24089]: --> [2:OK] Sep 28 12:37:27.40: [24089]: RECV recv DCN Sep 28 12:37:27.40: [24089]: RECV FAX (00000836): recvq/fax00495.tif from 34 93 3834255, route to <unspecified>, 0 pages in 0:37 Sep 28 12:37:27.40: [24089]: RECV FAX: COMREC received DCN Sep 28 12:37:27.40: [24089]: <-- [9:AT+FTH=3\r] Sep 28 12:37:27.42: [24089]: --> [7:CONNECT] Sep 28 12:37:28.88: [24089]: --> [2:OK] Sep 28 12:37:28.88: [24089]: RECV FAX (00000836): session with 34 93 3834255 terminated abnormally: COMREC received DCN Sep 28 12:37:28.88: [24089]: RECV FAX: bin/faxrcvd "recvq/fax00495.tif" "ttyS0" "00000836" "COMREC received DCN" "" ""

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions