HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Problems with specific fax receiver (or sender?)



Dear list-members.

When we try to send a fax to a specific fax destination, we get the 
following errors:

root@dmrfax02:/root # more /var/spool/hylafax/log/c000570301
Sep 20 17:50:10.87: [15312]: SESSION BEGIN 000570301 xxxxxxxxxx
Sep 20 17:50:10.87: [15312]: HylaFAX (tm) Version 4.2.0
Sep 20 17:50:10.87: [15312]: SEND FAX: JOB 418101 DEST 00xxxxxxxxxx COMMID 
000570301 DEVICE '/dev/ttyds25'
Sep 20 17:50:10.87: [15312]: STATE CHANGE: RUNNING -> SENDING
Sep 20 17:50:10.87: [15312]: MODEM input buffering enabled
Sep 20 17:50:10.87: [15312]: <-- [10:AT+FBOR=0\r]
Sep 20 17:50:10.97: [15312]: --> [2:OK]
Sep 20 17:50:10.97: [15312]: <-- [13:AT+FPHCTO=30\r]
Sep 20 17:50:11.07: [15312]: --> [5:ERROR]
Sep 20 17:50:11.07: [15312]: MODEM Command error
Sep 20 17:50:11.07: [15312]: <-- [10:AT+FBUG=1\r]
Sep 20 17:50:11.17: [15312]: --> [2:OK]
Sep 20 17:50:11.17: [15312]: <-- [24:AT+FDCC=1,5,2,2,0,2,0,0\r]
Sep 20 17:50:11.27: [15312]: --> [2:OK]
Sep 20 17:50:11.27: [15312]: DIAL 00xxxxxxxxxx
Sep 20 17:50:11.27: [15312]: <-- [17:ATDT00xxxxxxxxxx\r]
Sep 20 17:51:22.21: [15312]: --> [10:NO CARRIER]
Sep 20 17:51:22.21: [15312]: SEND FAILED: JOB 418101 DEST 00xxxxxxxxxx ERR 
No carrier detected
Sep 20 17:51:22.21: [15312]: SEND FAILED: JOB 418101 DEST 00xxxxxxxxxx ERR 
No carrier detected; too many attempts to dial
Sep 20 17:51:22.21: [15312]: <-- [5:ATH0\r]
Sep 20 17:51:22.31: [15312]: --> [2:OK]
Sep 20 17:51:22.31: [15312]: MODEM set DTR OFF
Sep 20 17:51:22.31: [15312]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 
5)
Sep 20 17:51:22.31: [15312]: SESSION END
/var/spool/hylafax/log/c000570301 lines 1-24/24 (END)


Does anybody care to explain what the command [13:AT+FPHCTO=30\r] is 
supposed to do, why it returns an error and how I can avoid it.

When I manually dial the number (00xxxxxxxxxx) I get a fax-response tone. 
I am also able to fax to the number from another fax machine. Is it 
possible to tell why the destination-site ignores faxes sent from our 
fax-server?

Our fax-server is able to send faxes to all other fax-destinations tried 
so far.

If a more detailed log-level is necessary, which parameters must I then 
tweak?

We are running HylaFAX v4.2.0 and SuSE SLES8 v2.4.21-138 on an HP DL380-G2 
with an Eicon Diva Server PRI 2.0 PCI (with 
divas4linux_EICON-104.429-1.i386.rpm) adapter.


Best regards / Med venlig hilsen

Ib-Michael Martinsen
IBM
Bytoften 1, DK-8240 Risskov, Denmark
Phone: +45 8673 5526 / Mobile: +45 2560 5526 / Fax: +45 7013 4006
e-mail: imm@xxxxxxxxxx


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions