Re: [hylafax-users] Use2D on Solaris with Hylafax 4.2.1

[Aidan Van Dyk <aidan@xxxxxxxx>]

* Roberts-Thomson, James <James.Roberts-Thomson@xxxxxxxxxx> [050921 00:35]:
> All,
> 
> I'm trying to debug an issue where faxes aren't being transmitted correctly
> from Hylafax 4.2.1.  I've narrowed it down to the use of "2-D MMR" in the
> outgoing faxes.  If a fax is sent with 2-D MMR, then the receiving machine
> will fail to receive it correctly.  Usually the problem is a "Unspecified
> Transmit Phase C error (code 40)" error returned to Hylafax.

Is this happening to *all* receivers, or just a particular receiver?  If
it's *all* receivers, then it looks like there is a more serious problem
somewhere...

> The problem I have is that using "sendfax -1" to force 1-D MH transmission
> works, but I can't make this the default.  Attempting to set the "Use2D: No"
> setting in the /var/spool/hylafax/etc/config still results in 2-D MMR being
> sent.

> How can I force 1-D globally if the "Use2D" setting is being ignored?  Or
> more to the point, why is the Use2D setting being ignored?

If you need to disable 2-D MR/MMR, you will need to disable the
software RTFCC.  From man hylafax-config:

ModemSoftRTFCC:
    ModemSoftRTFCC         boolean    Yes         enable software-driven real-time fax compression conversion

And if the problem isn't with all receivers, but just a particular
number, you can set these in destctrls to only disable 2D-MR/MMR for a
particular receiver.


a.

-- 
Aidan Van Dyk                                             aidan@xxxxxxxx
Senior Software Developer                          +1 215 438-4638 x8103
iFAX Solutions, Inc.                                http://www.ifax.com/

Attachment: signature.asc
Description: Digital signature