 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] [Fwd: facsimile not received]
- To: hylafax-users@xxxxxxxxxxx
- Subject: [hylafax-users] [Fwd: facsimile not received]
- From: Chris Jones <c.jones@xxxxxxxxxxxxx>
- Date: Mon, 19 Sep 2005 11:23:00 +0100
Hi
I'm looking at the attached log and it seems to suggest something isn't
configured right (there seem to be a lot of command errors coming from
the modem). This is hylafax 4.1.7 on RHEL3 with an Eicon Diva Server PRI
card. I have some other logs too with the same overall error ("T2, page
timed out") which seems to be pretty much the only kind of error I get
for failed received faxes.
Anything I can do to sort this out, or find more information?
Cheers,
--
Chris Jones
IT Department
ICM Group
ICM Group Limited is authorised and regulated by the Financial Services
Authority.
---
--- Begin Message ---
- To: FaxMaster@xxxxxxxxxxxxx
- Subject: facsimile not received
- From: The HylaFAX Receive Agent <fax@xxxxxxxxxxxxx>
- Date: Thu, 15 Sep 2005 15:55:50 +0100
An attempt to receive facsimile on ttyds02 failed because: T.30 T2 timeout, expected page not received ---- Transcript of session follows ---- Sep 15 15:55:29.30: [ 990]: SESSION BEGIN 00210076 441273711746 Sep 15 15:55:29.30: [ 990]: HylaFAX (tm) Version 4.1.7 Sep 15 15:55:29.30: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled Sep 15 15:55:29.30: [ 990]: <-- [4:ATA\r] Sep 15 15:55:33.90: [ 990]: --> [7:CONNECT] Sep 15 15:55:33.90: [ 990]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyds02' Sep 15 15:55:33.90: [ 990]: STATE CHANGE: ANSWERING -> RECEIVING Sep 15 15:55:33.90: [ 990]: MODEM input buffering enabled Sep 15 15:55:33.90: [ 990]: RECV FAX: begin Sep 15 15:55:33.91: [ 990]: MODEM input buffering disabled Sep 15 15:55:33.91: [ 990]: <-- HDLC<23:FF C0 02 2A A2 72 1A 82 62 82 2A CA 04 04 04 04 04 04 04 04 04 04 04> Sep 15 15:55:34.63: [ 990]: --> [7:CONNECT] Sep 15 15:55:34.63: [ 990]: <-- HDLC<10:FF C8 01 00 77 5F 01 79 03 C0> Sep 15 15:55:36.00: [ 990]: --> [2:OK] Sep 15 15:55:36.00: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:36.34: [ 990]: --> [7:CONNECT] Sep 15 15:55:38.08: [ 990]: --> HDLC<25:FF C0 C2 0C 0C 0C CC 04 AC CC EC EC 04 0C 4C 04 2C 2C D4 04 04 04 04 26 41> Sep 15 15:55:38.08: [ 990]: --> [2:OK] Sep 15 15:55:38.08: [ 990]: REMOTE TSI "+44 20 7735 3000" Sep 15 15:55:38.08: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:38.08: [ 990]: --> [7:CONNECT] Sep 15 15:55:38.43: [ 990]: --> HDLC<12:FF C8 C1 00 45 1F 01 01 01 00 CC D3> Sep 15 15:55:38.43: [ 990]: --> [2:OK] Sep 15 15:55:38.43: [ 990]: REMOTE wants 14400 bit/s Sep 15 15:55:38.43: [ 990]: REMOTE wants page width 1728 pixels in 215 mm Sep 15 15:55:38.43: [ 990]: REMOTE wants unlimited page length Sep 15 15:55:38.43: [ 990]: REMOTE wants 3.85 line/mm Sep 15 15:55:38.43: [ 990]: REMOTE wants 2-D MR Sep 15 15:55:38.43: [ 990]: RECV training at v.17 14400 bit/s Sep 15 15:55:38.43: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output generated Sep 15 15:55:38.43: [ 990]: <-- [11:AT+FRM=145\r] Sep 15 15:55:40.19: [ 990]: --> [7:CONNECT] Sep 15 15:55:41.71: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:41.71: [ 990]: RECV: TCF 2730 bytes, 0% non-zero, 2702 zero-run Sep 15 15:55:41.71: [ 990]: --> [10:NO CARRIER] Sep 15 15:55:41.71: [ 990]: DELAY 75 ms Sep 15 15:55:41.79: [ 990]: TRAINING succeeded Sep 15 15:55:41.79: [ 990]: <-- [9:AT+FTH=3\r] Sep 15 15:55:41.86: [ 990]: --> [7:CONNECT] Sep 15 15:55:41.86: [ 990]: <-- HDLC<3:FF C8 21> Sep 15 15:55:42.51: [ 990]: --> [10:NO CARRIER] Sep 15 15:55:42.51: [ 990]: MODEM No carrier Sep 15 15:55:42.51: [ 990]: MODEM input buffering enabled Sep 15 15:55:42.51: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:42.51: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:42.61: [ 990]: --> [5:ERROR] Sep 15 15:55:42.61: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:42.61: [ 990]: MODEM input buffering disabled Sep 15 15:55:42.81: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:42.81: [ 990]: MODEM <Timeout> Sep 15 15:55:42.81: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:42.81: [ 990]: --> [5:ERROR] Sep 15 15:55:42.81: [ 990]: MODEM Command error Sep 15 15:55:42.81: [ 990]: MODEM input buffering enabled Sep 15 15:55:42.81: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:42.81: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:42.91: [ 990]: --> [5:ERROR] Sep 15 15:55:42.91: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:42.91: [ 990]: MODEM input buffering disabled Sep 15 15:55:43.11: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:43.11: [ 990]: MODEM <Timeout> Sep 15 15:55:43.11: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:43.11: [ 990]: --> [5:ERROR] Sep 15 15:55:43.11: [ 990]: MODEM Command error Sep 15 15:55:43.11: [ 990]: MODEM input buffering enabled Sep 15 15:55:43.11: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:43.11: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:43.21: [ 990]: --> [5:ERROR] Sep 15 15:55:43.21: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:43.21: [ 990]: MODEM input buffering disabled Sep 15 15:55:43.41: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:43.41: [ 990]: MODEM <Timeout> Sep 15 15:55:43.41: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:43.41: [ 990]: --> [5:ERROR] Sep 15 15:55:43.41: [ 990]: MODEM Command error Sep 15 15:55:43.41: [ 990]: MODEM input buffering enabled Sep 15 15:55:43.41: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:43.41: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:43.51: [ 990]: --> [5:ERROR] Sep 15 15:55:43.51: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:43.51: [ 990]: MODEM input buffering disabled Sep 15 15:55:43.71: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:43.71: [ 990]: MODEM <Timeout> Sep 15 15:55:43.71: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:43.71: [ 990]: --> [5:ERROR] Sep 15 15:55:43.71: [ 990]: MODEM Command error Sep 15 15:55:43.71: [ 990]: MODEM input buffering enabled Sep 15 15:55:43.71: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:43.71: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:43.81: [ 990]: --> [5:ERROR] Sep 15 15:55:43.81: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:43.81: [ 990]: MODEM input buffering disabled Sep 15 15:55:44.01: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:44.01: [ 990]: MODEM <Timeout> Sep 15 15:55:44.01: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:44.01: [ 990]: --> [5:ERROR] Sep 15 15:55:44.01: [ 990]: MODEM Command error Sep 15 15:55:44.01: [ 990]: MODEM input buffering enabled Sep 15 15:55:44.01: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:44.01: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:44.11: [ 990]: --> [5:ERROR] Sep 15 15:55:44.11: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:44.11: [ 990]: MODEM input buffering disabled Sep 15 15:55:44.31: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:44.31: [ 990]: MODEM <Timeout> Sep 15 15:55:44.31: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:44.31: [ 990]: --> [5:ERROR] Sep 15 15:55:44.31: [ 990]: MODEM Command error Sep 15 15:55:44.31: [ 990]: MODEM input buffering enabled Sep 15 15:55:44.31: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:44.31: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:44.41: [ 990]: --> [5:ERROR] Sep 15 15:55:44.41: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:44.41: [ 990]: MODEM input buffering disabled Sep 15 15:55:44.61: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:44.61: [ 990]: MODEM <Timeout> Sep 15 15:55:44.61: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:44.61: [ 990]: --> [5:ERROR] Sep 15 15:55:44.61: [ 990]: MODEM Command error Sep 15 15:55:44.61: [ 990]: MODEM input buffering enabled Sep 15 15:55:44.61: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:44.61: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:44.71: [ 990]: --> [5:ERROR] Sep 15 15:55:44.71: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:44.71: [ 990]: MODEM input buffering disabled Sep 15 15:55:44.91: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:44.91: [ 990]: MODEM <Timeout> Sep 15 15:55:44.91: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:44.91: [ 990]: --> [5:ERROR] Sep 15 15:55:44.91: [ 990]: MODEM Command error Sep 15 15:55:44.91: [ 990]: MODEM input buffering enabled Sep 15 15:55:44.91: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:44.91: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:45.01: [ 990]: --> [5:ERROR] Sep 15 15:55:45.01: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:45.01: [ 990]: MODEM input buffering disabled Sep 15 15:55:45.21: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:45.21: [ 990]: MODEM <Timeout> Sep 15 15:55:45.21: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:45.21: [ 990]: --> [5:ERROR] Sep 15 15:55:45.21: [ 990]: MODEM Command error Sep 15 15:55:45.21: [ 990]: MODEM input buffering enabled Sep 15 15:55:45.21: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:45.21: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:45.31: [ 990]: --> [5:ERROR] Sep 15 15:55:45.31: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:45.31: [ 990]: MODEM input buffering disabled Sep 15 15:55:45.51: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:45.51: [ 990]: MODEM <Timeout> Sep 15 15:55:45.51: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:45.51: [ 990]: --> [5:ERROR] Sep 15 15:55:45.51: [ 990]: MODEM Command error Sep 15 15:55:45.51: [ 990]: MODEM input buffering enabled Sep 15 15:55:45.51: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:45.51: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:45.61: [ 990]: --> [5:ERROR] Sep 15 15:55:45.61: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:45.61: [ 990]: MODEM input buffering disabled Sep 15 15:55:45.81: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:45.81: [ 990]: MODEM <Timeout> Sep 15 15:55:45.81: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:45.81: [ 990]: --> [5:ERROR] Sep 15 15:55:45.81: [ 990]: MODEM Command error Sep 15 15:55:45.81: [ 990]: MODEM input buffering enabled Sep 15 15:55:45.81: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:45.81: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:45.91: [ 990]: --> [5:ERROR] Sep 15 15:55:45.91: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:45.91: [ 990]: MODEM input buffering disabled Sep 15 15:55:46.11: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:46.11: [ 990]: MODEM <Timeout> Sep 15 15:55:46.11: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:46.11: [ 990]: --> [5:ERROR] Sep 15 15:55:46.11: [ 990]: MODEM Command error Sep 15 15:55:46.11: [ 990]: MODEM input buffering enabled Sep 15 15:55:46.11: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:46.11: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:46.21: [ 990]: --> [5:ERROR] Sep 15 15:55:46.21: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:46.21: [ 990]: MODEM input buffering disabled Sep 15 15:55:46.41: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:46.41: [ 990]: MODEM <Timeout> Sep 15 15:55:46.41: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:46.41: [ 990]: --> [5:ERROR] Sep 15 15:55:46.41: [ 990]: MODEM Command error Sep 15 15:55:46.41: [ 990]: MODEM input buffering enabled Sep 15 15:55:46.41: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:46.41: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:46.51: [ 990]: --> [5:ERROR] Sep 15 15:55:46.51: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:46.51: [ 990]: MODEM input buffering disabled Sep 15 15:55:46.71: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:46.71: [ 990]: MODEM <Timeout> Sep 15 15:55:46.71: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:46.71: [ 990]: --> [5:ERROR] Sep 15 15:55:46.71: [ 990]: MODEM Command error Sep 15 15:55:46.71: [ 990]: MODEM input buffering enabled Sep 15 15:55:46.71: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:46.71: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:46.81: [ 990]: --> [5:ERROR] Sep 15 15:55:46.81: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:46.81: [ 990]: MODEM input buffering disabled Sep 15 15:55:47.01: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:47.01: [ 990]: MODEM <Timeout> Sep 15 15:55:47.01: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:47.01: [ 990]: --> [5:ERROR] Sep 15 15:55:47.01: [ 990]: MODEM Command error Sep 15 15:55:47.01: [ 990]: MODEM input buffering enabled Sep 15 15:55:47.01: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:47.01: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:47.11: [ 990]: --> [5:ERROR] Sep 15 15:55:47.11: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:47.11: [ 990]: MODEM input buffering disabled Sep 15 15:55:47.31: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:47.31: [ 990]: MODEM <Timeout> Sep 15 15:55:47.31: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:47.31: [ 990]: --> [5:ERROR] Sep 15 15:55:47.31: [ 990]: MODEM Command error Sep 15 15:55:47.31: [ 990]: MODEM input buffering enabled Sep 15 15:55:47.31: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:47.31: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:47.41: [ 990]: --> [5:ERROR] Sep 15 15:55:47.41: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:47.41: [ 990]: MODEM input buffering disabled Sep 15 15:55:47.61: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:47.61: [ 990]: MODEM <Timeout> Sep 15 15:55:47.61: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:47.61: [ 990]: --> [5:ERROR] Sep 15 15:55:47.61: [ 990]: MODEM Command error Sep 15 15:55:47.61: [ 990]: MODEM input buffering enabled Sep 15 15:55:47.61: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:47.61: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:47.71: [ 990]: --> [5:ERROR] Sep 15 15:55:47.71: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:47.71: [ 990]: MODEM input buffering disabled Sep 15 15:55:47.91: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:47.91: [ 990]: MODEM <Timeout> Sep 15 15:55:47.91: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:47.91: [ 990]: --> [5:ERROR] Sep 15 15:55:47.91: [ 990]: MODEM Command error Sep 15 15:55:47.91: [ 990]: MODEM input buffering enabled Sep 15 15:55:47.91: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:47.91: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:48.01: [ 990]: --> [5:ERROR] Sep 15 15:55:48.01: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:48.01: [ 990]: MODEM input buffering disabled Sep 15 15:55:48.21: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:48.21: [ 990]: MODEM <Timeout> Sep 15 15:55:48.21: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:48.21: [ 990]: --> [5:ERROR] Sep 15 15:55:48.21: [ 990]: MODEM Command error Sep 15 15:55:48.21: [ 990]: MODEM input buffering enabled Sep 15 15:55:48.21: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:48.21: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:48.31: [ 990]: --> [5:ERROR] Sep 15 15:55:48.31: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:48.31: [ 990]: MODEM input buffering disabled Sep 15 15:55:48.51: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:48.51: [ 990]: MODEM <Timeout> Sep 15 15:55:48.51: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:48.51: [ 990]: --> [5:ERROR] Sep 15 15:55:48.51: [ 990]: MODEM Command error Sep 15 15:55:48.51: [ 990]: MODEM input buffering enabled Sep 15 15:55:48.51: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:48.51: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:48.61: [ 990]: --> [5:ERROR] Sep 15 15:55:48.61: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:48.61: [ 990]: MODEM input buffering disabled Sep 15 15:55:48.81: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:48.81: [ 990]: MODEM <Timeout> Sep 15 15:55:48.81: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:48.81: [ 990]: --> [5:ERROR] Sep 15 15:55:48.81: [ 990]: MODEM Command error Sep 15 15:55:48.81: [ 990]: MODEM input buffering enabled Sep 15 15:55:48.81: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:48.81: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:48.91: [ 990]: --> [5:ERROR] Sep 15 15:55:48.91: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:48.91: [ 990]: MODEM input buffering disabled Sep 15 15:55:49.11: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:49.11: [ 990]: MODEM <Timeout> Sep 15 15:55:49.11: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:49.11: [ 990]: --> [5:ERROR] Sep 15 15:55:49.11: [ 990]: MODEM Command error Sep 15 15:55:49.11: [ 990]: MODEM input buffering enabled Sep 15 15:55:49.11: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:49.11: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:49.21: [ 990]: --> [5:ERROR] Sep 15 15:55:49.21: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:49.21: [ 990]: MODEM input buffering disabled Sep 15 15:55:49.41: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:49.41: [ 990]: MODEM <Timeout> Sep 15 15:55:49.41: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:49.41: [ 990]: --> [5:ERROR] Sep 15 15:55:49.41: [ 990]: MODEM Command error Sep 15 15:55:49.41: [ 990]: MODEM input buffering enabled Sep 15 15:55:49.41: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:49.41: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:49.51: [ 990]: --> [5:ERROR] Sep 15 15:55:49.51: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:49.51: [ 990]: MODEM input buffering disabled Sep 15 15:55:49.71: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:49.71: [ 990]: MODEM <Timeout> Sep 15 15:55:49.71: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:49.71: [ 990]: --> [5:ERROR] Sep 15 15:55:49.71: [ 990]: MODEM Command error Sep 15 15:55:49.71: [ 990]: MODEM input buffering enabled Sep 15 15:55:49.71: [ 990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 15 15:55:49.71: [ 990]: <-- [11:AT+FRM=146\r] Sep 15 15:55:49.81: [ 990]: --> [5:ERROR] Sep 15 15:55:49.81: [ 990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Sep 15 15:55:49.81: [ 990]: MODEM input buffering disabled Sep 15 15:55:50.01: [ 990]: MODEM TIMEOUT: reading line from modem Sep 15 15:55:50.01: [ 990]: MODEM <Timeout> Sep 15 15:55:50.01: [ 990]: <-- [9:AT+FRH=3\r] Sep 15 15:55:50.01: [ 990]: --> [5:ERROR] Sep 15 15:55:50.01: [ 990]: MODEM Command error Sep 15 15:55:50.01: [ 990]: RECV FAX (00210076): recvq/fax45904.tif from +44 20 7735 3000, route to <unspecified>, 0 pages in 0:17 Sep 15 15:55:50.01: [ 990]: RECV FAX: T.30 T2 timeout, expected page not received Sep 15 15:55:50.01: [ 990]: <-- [9:AT+FTH=3\r] Sep 15 15:55:50.01: [ 990]: --> [5:ERROR] Sep 15 15:55:50.01: [ 990]: MODEM input buffering enabled Sep 15 15:55:50.01: [ 990]: RECV FAX (00210076): session with +44 20 7735 3000 terminated abnormally: T.30 T2 timeout, expected page not received Sep 15 15:55:50.01: [ 990]: RECV FAX: bin/faxrcvd "recvq/fax45904.tif" "ttyds02" "00210076" "T.30 T2 timeout, expected page not received" "RING CID: DAD: 232288" "RING CID: DAD: 232288"
--- End Message ---
- Follow-Ups:
- [hylafax-users] Viewing faxes - With WHFC or otherwise
- From: James McCall
- Re: [hylafax-users] [Fwd: facsimile not received]
- From: Lee Howard
- [hylafax-users] Viewing faxes - With WHFC or otherwise
- Prev by Date: [hylafax-users] WHFC Fehler beim Zugriff auf doneq
- Next by Date: [hylafax-users] Viewing faxes - With WHFC or otherwise
- Previous by thread: [hylafax-users] WHFC Fehler beim Zugriff auf doneq
- Next by thread: [hylafax-users] Viewing faxes - With WHFC or otherwise
- Index(es):
Project hosted by iFAX Solutions