[hylafax-users] Blank black page .tif file

[Indra Nusantara <indran@xxxxxxxxxx>]

Hello all,

I'm a new member here. And I'm also new to Hylafax. I have just 
installed the hylafax-server in my Mandrake 10.1 box. It is working 
fine. Outgoing fax is perfect. Incoming fax is received completely, but 
the .tif files in recvq/ are all black blank pages with some garbage 
along the top of the pages.

Anybody can tell me what I did wrong ?

The following is one of the log files:

Sep 15 13:55:08.97: [13127]: SESSION BEGIN 000000021 622154371976
Sep 15 13:55:08.97: [13127]: HylaFAX (tm) Version 4.2.0
Sep 15 13:55:08.97: [13127]: <-- [4:ATA\r]
Sep 15 13:55:14.98: [13127]: --> [7:CONNECT]
Sep 15 13:55:14.98: [13127]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Sep 15 13:55:14.98: [13127]: RECV FAX: begin
Sep 15 13:55:14.98: [13127]: <-- data [32]
Sep 15 13:55:14.98: [13127]: <-- data [2]
Sep 15 13:55:16.91: [13127]: --> [7:CONNECT]
Sep 15 13:55:16.91: [13127]: <-- data [23]
Sep 15 13:55:16.91: [13127]: <-- data [2]
Sep 15 13:55:17.73: [13127]: --> [7:CONNECT]
Sep 15 13:55:17.73: [13127]: <-- data [10]
Sep 15 13:55:17.73: [13127]: <-- data [2]
Sep 15 13:55:18.30: [13127]: --> [2:OK]
Sep 15 13:55:18.30: [13127]: <-- [9:AT+FRH=3\r]
Sep 15 13:55:19.11: [13127]: --> [7:CONNECT]
Sep 15 13:55:20.58: [13127]: --> [2:OK]
Sep 15 13:55:20.58: [13127]: REMOTE TSI "+62 21 54371976"
Sep 15 13:55:20.58: [13127]: <-- [9:AT+FRH=3\r]
Sep 15 13:55:20.60: [13127]: --> [7:CONNECT]
Sep 15 13:55:20.90: [13127]: --> [2:OK]
Sep 15 13:55:20.90: [13127]: REMOTE wants 9600 bit/s
Sep 15 13:55:20.90: [13127]: REMOTE wants A4 page width (215 mm)
Sep 15 13:55:20.90: [13127]: REMOTE wants unlimited page length
Sep 15 13:55:20.90: [13127]: REMOTE wants 3.85 line/mm
Sep 15 13:55:20.90: [13127]: REMOTE wants 1-D MH
Sep 15 13:55:20.90: [13127]: RECV training at v.29 9600 bit/s
Sep 15 13:55:20.90: [13127]: <-- [10:AT+FRM=96\r]
Sep 15 13:55:21.49: [13127]: --> [7:CONNECT]
Sep 15 13:55:23.07: [13127]: RECV: TCF 1874 bytes, 2% non-zero, 1830 
zero-run
Sep 15 13:55:23.08: [13127]: --> [10:NO CARRIER]
Sep 15 13:55:23.08: [13127]: DELAY 75 ms
Sep 15 13:55:23.15: [13127]: TRAINING succeeded
Sep 15 13:55:23.15: [13127]: <-- [9:AT+FTH=3\r]
Sep 15 13:55:23.20: [13127]: --> [7:CONNECT]
Sep 15 13:55:23.20: [13127]: <-- data [3]
Sep 15 13:55:23.20: [13127]: <-- data [2]
Sep 15 13:55:24.51: [13127]: --> [2:OK]
Sep 15 13:55:24.51: [13127]: <-- [10:AT+FRM=96\r]
Sep 15 13:55:25.08: [13127]: --> [7:CONNECT]
Sep 15 13:55:25.08: [13127]: RECV: begin page
Sep 15 13:55:45.26: [13127]: RECV: 428 total lines, 0 bad lines, 0 
consecutive bad lines
Sep 15 13:55:45.26: [13127]: RECV: end page
Sep 15 13:55:45.26: [13127]: --> [10:NO CARRIER]
Sep 15 13:55:45.26: [13127]: <-- [9:AT+FRH=3\r]
Sep 15 13:55:45.73: [13127]: --> [7:CONNECT]
Sep 15 13:55:46.56: [13127]: --> [2:OK]
Sep 15 13:55:46.56: [13127]: RECV recv EOP (no more pages or documents)
Sep 15 13:55:46.56: [13127]: <-- [9:AT+FRS=7\r]
Sep 15 13:55:46.79: [13127]: --> [2:OK]
Sep 15 13:55:46.79: [13127]: <-- [9:AT+FTH=3\r]
Sep 15 13:55:46.93: [13127]: --> [7:CONNECT]
Sep 15 13:55:46.93: [13127]: <-- data [3]
Sep 15 13:55:46.93: [13127]: <-- data [2]
Sep 15 13:55:48.25: [13127]: --> [2:OK]
Sep 15 13:55:48.25: [13127]: RECV send MCF (message confirmation)
Sep 15 13:55:48.25: [13127]: RECV FAX (000000021): from +62 21 54371976, 
page 1 in 0:25, INF, 3.85 line/mm, 1-D MH, 9600 bit/s
Sep 15 13:55:48.25: [13127]: RECV FAX (000000021): 
recvq/fax000000014.tif from +62 21 54371976, route to <unspecified>, 1 
pages in 0:34
Sep 15 13:55:48.25: [13127]: <-- [9:AT+FRH=3\r]
Sep 15 13:55:49.01: [13127]: --> [7:CONNECT]
Sep 15 13:55:49.98: [13127]: --> [2:OK]
Sep 15 13:55:49.98: [13127]: RECV FAX: bin/faxrcvd 
"recvq/fax000000014.tif" "ttyS0" "000000021" "" "" ""
Sep 15 13:55:49.98: [13127]: RECV FAX: end
Sep 15 13:55:49.98: [13127]: SESSION END


Thanks.


--
Regards,

Indra Nusantara


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*