Re: [hylafax-users] isi5634upci 8 ports

["support" <support@xxxxxxxxxxxx>]

Hi Emmanuel.

Unfortunately, I don't fully understand your question.  The isi5634 and
OCTO+ boards appear to the operating system as eight serial ports each with
a modem connected.  This is exactly the same as connecting eight external
serial modems (if your system had enough serial ports) or eight PCI/ISA
modems (if your system had enough PCI/ISA slots).  Once installed into your
system the isi5634 or OCTO+ will use the standard serial driver that is
provided by the operating system and you will have eight serial ports (with
modems connected) available for use.  Obviously, to use all eight ports you
will require eight analog phone lines.... although you are free to use fewer
ports/lines if you wish.

Once you have the eight modems installed you can configure your applications
to use them in any manor you wish.  For example you may wish to use ports 1
and 2 for sending fax, ports 3, 4, and 5 for receiving fax, port 6 for
voice, port 7 for data, and port 8 for sending/receiving fax.  Or you might
want to have ports that share fax, voice, and data.  Basically, the ports
are completely independent and can be configure them to do pretty much
anything you want.

If this is not answering your question maybe you could try ringing our UK
office and we would be happy to talk you through this +44 1373 830888.

Regards

Andrew 

-----Original Message-----
From: Emmanuel ESTIENNE [mailto:emmanuel.estienne@xxxxxxxxxx] 
Sent: 02 September 2005 09:20
To: support@xxxxxxxxxxxx; hylafax-users@xxxxxxxxxxx
Subject: Re: RE: RE: [hylafax-users] isi5634upci 8 ports

So, I don't need any test before buy it. That's ok. But my first question is
how may I install it, I install the driver for PCI card, but after, you say
I can install the 8 modems, but I don't understand the other possibility,
can I install only one, and let it send on the different phone lines ?

Thank for answers

Emmanuel ESTIENNE


> Message du 30/08/05 16:45
> De : "support" <support@xxxxxxxxxxxx>
> A : emmanuel.estienne@xxxxxxxxxx
> Copie à : 
> Objet : RE: RE: [hylafax-users] isi5634upci 8 ports
> 
> No problems.... and if you decide to consider our 8 port card
> (http://www.mainpine.com/downloads/DS2024_2_A4.PDF) I'm sure the sales 
> team would try to beat the quote you've received for the isi5634upci card.
> 
> Needless to say, our board will work in any PCI or PCI-X slot 
> (including those that only have 5 volts).
> 
> Regards
> 
> Andrew
> 
> -----Original Message-----
> From: Emmanuel ESTIENNE [mailto:emmanuel.estienne@xxxxxxxxxx]
> Sent: 30 August 2005 15:36
> To: support@xxxxxxxxxxxx
> Subject: Re: RE: [hylafax-users] isi5634upci 8 ports
> 
> Ok thank you
> 
> 
> > Message du 30/08/05 15:50
> > De : "support" <support@xxxxxxxxxxxx> A : 
> > emmanuel.estienne@xxxxxxxxxx, hylafax-users@xxxxxxxxxxx Copie à :
> > Objet : RE: [hylafax-users] isi5634upci 8 ports
> > 
> > Hi Emmanuel.
> > 
> > You can think of the isi5634upci as 8 independent modems/fax 
> > machines with each port/line being completely independent.
> > 
> > One issue you may want to be aware of is that the isi5634upci 
> > requires both
> > 3.3 volt and 5 volt power from the PCI connector.  Most (but not 
> > all) motherboards that claim conformance to PCI specification 
> > revision 2.2 supply both voltages.  Here is part of the warning from 
> > Multitech that accompanies the isi5634upci "Please verify the PCI 
> > slot in your computer before installing this card.  For further 
> > assistance please call tech support at
> > (800) 972-2439".  You may want to check your motherboard and/or call 
> > Multitech before you purchase the board !
> > 
> > Regards
> > 
> > Andrew Rinaldi
> > Mainpine Support
> > e: support@xxxxxxxxxxxx
> > w: http://www.mainpine.com
> > t: +44(0) 1373 830888
> > f: +44(0) 1373 830768
> > 
> > -----Original Message-----
> > From: hylafax-users-bounce@xxxxxxxxxxx 
> > [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Emmanuel 
> > ESTIENNE
> > Sent: 30 August 2005 14:31
> > To: hylafax-users@xxxxxxxxxxx
> > Subject: [hylafax-users] isi5634upci 8 ports
> > 
> > Hi,
> > 
> > I'm gonna buy a isi5634upci 8 ports, but at this time, I have no 
> > idea on how I can install it, may I install 8 fax on hylafax, on is 
> > there a possibility to install one, and all fax are send by the card 
> > on the
> different lines.
> > 
> > Thanks for your help
> > 
> > Emmanuel ESTIENNE
> > 
> > 
> > ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> >   To subscribe/unsubscribe, click
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
> /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail
> > sales@xxxxxxxxx*
> > 
> > 
> > 
> > 
> >
> 
> 
> 
> 
>




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*