[hylafax-users] A Few Questions after 4.2.1 Install

[Bruce Harrison <bruce@xxxxxxxxxxxxxxxxxx>]

I sent this out earlier, but was not a member of this
list (I thought I was but I guess I had not poperly
completed the subscription), so I'm resending it to be
sure.


Hello All!

   First I have to say that I'm very impressed with
the HylaFAX product.  I have Inbound and Outbound both
working.  I do have several questions that I could not
find the answers to when searching the HylaFAX site
(or I missed them!).

1) The install script asked about a modem group, so I
provided one (mgroup1).  I only have one modem
currently, but may add a second one at some point.  In
syslog, I now see the following message:

Aug 31 12:06:04 linuxprod FaxQueuer[26906]: Missing
':' separator in modem group specification

The entry in my config file is as follows:

ModemGroup:             mgroup1

2) I setup a facility of local1 in /etc/syslog.conf
and used this value for LogFacility in the config
file.  This does send HylaFAX messages where I
intended, but they are still going to
/var/log/messages as well.  Is there anyway to stop
the HylaFAX messages from going to both logs?

3) At one point I did a faxmodem ttyS1 (my modem is on
ttyS0) by mistake.  Nothing is connected to ttyS1.  I
started looking for a way to undo my mistake.  I was
hoping for a faxremovemodem or some such utility. 
Anyway, what is the best way to remove the traces of
my error?  I did notice the following files were
created, presumably as a result of my command.

/var/spool/hylafax/tmp/ttyS1_last_wedged_email
/var/spool/hylafax/status/ttyS1
/var/spool/hylafax/FIFO.ttyS1


Thanks!


Bruce...

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*