[hylafax-users] R: Problem to send fax!!

["Francesco Andrisani" <francesco.andrisani@xxxxxxxxxx>]

Hi Guido,

yes i pasted my config.faxCapi.

My cpi.conf is:

 

c4      c4.bin  DSS1    -       -       -       1

c4      c4.bin  DSS1    -       -       -       2

c4      c4.bin  DSS1    -       -       -       3

c4      c4.bin  DSS1    -       -       -       4

 

If I type #capiinfo, I see:

 

# capiinfo

Number of Controllers : 4

Controller 1:

Manufacturer: AVM GmbH

CAPI Version: 2.0

Manufacturer Version: 3.101-06  (49.22)

Serial Number: 0900239

BChannels: 2

Global Options: 0x00000039

   internal controller supported

   DTMF supported

   Supplementary Services supported

   channel allocation supported (leased lines)

B1 protocols support: 0x4000011f

   64 kbit/s with HDLC framing

   64 kbit/s bit-transparent operation

   V.110 asynconous operation with start/stop byte framing

   V.110 synconous operation with HDLC framing

   T.30 modem for fax group 3

   Modem asyncronous operation with start/stop byte framing

B2 protocols support: 0x00000b1b

   ISO 7776 (X.75 SLP)

   Transparent

   LAPD with Q.921 for D channel X.25 (SAPI 16)

   T.30 for fax group 3

   ISO 7776 (X.75 SLP) with V.42bis compression

   V.120 asyncronous mode

   V.120 bit-transparent mode

B3 protocols support: 0x800000bf

   Transparent

   T.90NL, T.70NL, T.90

   ISO 8208 (X.25 DTE-DTE)

   X.25 DCE

   T.30 for fax group 3

   T.30 for fax group 3 with extensions

   Modem

 

  0100

  0200

  39000000

  1f010040

  1b0b0000

  bf000080

  00000000 00000000 00000000 00000000 00000000 00000000

  01000001 00020000 00000000 00000000 00000000

 

Supplementary services support: 0x000003ff

   Hold / Retrieve

   Terminal Portability

   ECT

   3PTY

   Call Forwarding

   Call Deflection

   MCID

   CCBS

………..

 

The result of command #capiinit status is:

 

1 c4         running  c4-3080          C4 3.11-06 0x3080 5 0xf7cf0000

2 c4         running  c4-3080          C4 3.11-06 0x3080 5 0xf7cf0000

3 c4         running  c4-3080          C4 3.11-06 0x3080 5 0xf7cf0000

4 c4         running  c4-3080          C4 3.11-06 0x3080 5 0xf7cf0000

 

But the problem is strong to resolve.

Thanks

---

Da: Guido Hecken [mailto:guido.hecken@xxxxxxxxxxxxx]
Inviato: mercoledì 31 agosto 2005 11.52
A: Francesco Andrisani
Oggetto: RE: [hylafax-users] Problem to send fax!!

 

AFAIK capi.conf should read for a C4 Controller like this:

 

#c4             c4.bin          DSS1    -       -       -       -

#c4             -               DSS1    -       -       -       -

#c4             -               DSS1    -       -       -       -       P2P

#c4             c4.bin          DSS1    -       -       -       -       P2P

 

What you pasted in your mail is the content of /var/spool/hylafax/etc/config.faxCAPI ?!

What does capiinfo say? It should give you something like this (Output of an AVM Fritz Card here):

 

Number of Controllers : 1

Controller 1:

Manufacturer: AVM GmbH

CAPI Version: 2.0

Manufacturer Version: 3.101-02  (49.18)

Serial Number: 1000001

BChannels: 2

Global Options: 0x00000039

   internal controller supported

   DTMF supported

   Supplementary Services supported

   channel allocation supported (leased lines)

B1 protocols support: 0x4000011f

   64 kbit/s with HDLC framing

   64 kbit/s bit-transparent operation

   V.110 asynconous operation with start/stop byte framing

   V.110 synconous operation with HDLC framing

   T.30 modem for fax group 3

   Modem asyncronous operation with start/stop byte framing

B2 protocols support: 0x00000b1b

   ISO 7776 (X.75 SLP)

   Transparent

   LAPD with Q.921 for D channel X.25 (SAPI 16)

   T.30 for fax group 3

   ISO 7776 (X.75 SLP) with V.42bis compression

   V.120 asyncronous mode

   V.120 bit-transparent mode

B3 protocols support: 0x800000bf

   Transparent

   T.90NL, T.70NL, T.90

   ISO 8208 (X.25 DTE-DTE)

   X.25 DCE

   T.30 for fax group 3

   T.30

...

 

Maybe, I'm wrong, but the above works for us.

 

Hope this helps a little bit in the fight with/against hylafax ;-)

 

Guido Hecken

 

---

Von: Francesco Andrisani [mailto:francesco.andrisani@xxxxxxxxxx]
Gesendet: Mittwoch, 31. August 2005 11:10
An: hylafax-users@xxxxxxxxxxx
Cc: Helio Almeida; Margherita Contino; Alessandra Mancosu
Betreff: [hylafax-users] Problem to send fax!!

 

Hi all,

i have a problem with my AVM C4 ISDN Board (into my server i’ve installed Linux RedHat 8.0); It don’t send fax.

I’ve change  a telephone number into my capi.conf (listen below) and when I try to send a fax it print to sceen this error message:

 

[…]#c2faxsend -f TIFF -d 00657xxxxxx -v /var/www/html/fax/inbox/cff0000424.tif

Try to connect to fax number 00657xxxxxx in TIFF mode on controller 1.

Dial and starting transfer of TIFF-File /var/www/html/fax/inbox/cff0000424.tif with fine resolution.

Connection dropped with Reason 0x3301 (Protocol error layer 1 (broken line or B-channel removed by signalling protocol)).

 

My piece of file (capi.conf) is:

 

…..

{

    # Controller 2, B-Channel 1

    HylafaxDeviceName:          faxCAPI21

    RecvFileMode:               0644

    FAXNumber:                  0657xxxxxx

    #FAXNumber:                  +39.00.00000

    LocalIdentifier:            "xxxxxxx."

    MaxConcurrentRecvs:         1

    OutgoingController:         2

    OutgoingMSN:

    SuppressMSN:                0

    NumberPrefix:

    UseISDNFaxService:          1

    RingingDuration:            0

    {

        Controller:             2

        AcceptSpeech:           1

        UseDDI:                 0

        DDIOffset:              "39976"

        DDILength:              3

        IncomingMSNs:

        AcceptGlobalCall:       1

    }

}

{

    # Controller 2, B-Channel 2

    HylafaxDeviceName:          faxCAPI22

RecvFileMode:               0644

    FAXNumber:                  0657xxxxxx

    #FAXNumber:                  +39.00.00000

    LocalIdentifier:            "xxxxxxxx"

    MaxConcurrentRecvs:         1

    OutgoingController:         2

    OutgoingMSN:

    SuppressMSN:                0

    NumberPrefix:

    UseISDNFaxService:          1

    RingingDuration:            0

    {

        Controller:             2

        AcceptSpeech:           1

        UseDDI:                 0

        DDIOffset:              "39976"

        DDILength:              3

        IncomingMSNs:

        AcceptGlobalCall:       1

    }

}

 

Help me, please.

 

Francesco

 

 

 

________________________________________

Francesco Andrisani

 

Software Developer

mailto: francesco.andrisani@xxxxxxxxxx

Gruppo Acotel

http://www.acotel.com

Via della Valle dei Fontanili, 29

00168 Roma

Tel: +39661141220

Mobile: +393332890778

Fax +3966149936

________________________________________

Le informazioni contenute nella comunicazione che precede possono essere riservate e sono, comunque, destinate esclusivamente alla persona o all’ente sopraindicati. La diffusione, distribuzione e/o copiatura non autorizzata del documento trasmesso da parte di qualsiasi soggetto è proibita. La sicurezza e la correttezza dei messaggi di posta elettronica non possono essere garantite. Se avete ricevuto questo messaggio per errore, Vi preghiamo di contattarci immediatamente. Grazie.

This communication is intended only for use by the addressee. It may contain confidential or privileged information. Transmission cannot be guaranteed to be secure or error-free. If you receive this communication unintentionally, please inform us immediately. Thank you.