Re: [hylafax-users] Hylafax DID support

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Brian D. Blake wrote:

> Our phone system (NEC Aspire) is compatible with DID and our service 
> provider can supply me with the required DID numbers and system 
> programming to use DID routing for our companies faxes. I am looking 
> at the Multi-Tech Systems MT5634ZBA-DID modem to use for this 
> function. I have searched the archives and can only find posts as 
> recent as 2003 regarding Hylafax and DID support. Does Hylafax support 
> fax routing by DID numbers? If so, can someone point me in the right 
> direction for instructions on setting Hylaxfax up for this.

See:

 http://www.hylafax.org/archive/2005-03/msg00375.php
 http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=374

The best reference, though, is the man page.  The man page ('man 
hylafax-config') entry in current CVS HEAD says:


     For  example,  the  following  settings  will cause
     HylaFAX to enter voice mode and go off-hook when  a
     RING  is  detected.   It will then expect four DTMF
     digits (presumably for routing), and then  it  will
     pause  for  100 ms before returning to fax mode and
     answering the call.

       ModemRingResponse:     AT+FCLASS=8;H1
       CallIDPattern:         SHIELDED_DTMF
       CallIDAnswerLength:    4
       ModemAnswerCmd:        <delay:100>AT+FCLASS=1;A

Of course, using these settings you'd also want to change 
RingsBeforeAnswer to something like 0 or 5 (so that answer occurs on DID 
reception, not rings).

Note that CallID stuff is not in 4.2.1.  You'd need to use "CIDNumber: 
SHIELDED_DTMF" and "CIDNumberAnswerLength: 4" with 4.2.1. (Name/Number 
interchangeable)

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*