Re: [hylafax-users] coordinating batches, was: FaxDispatch...

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

steve@xxxxxxxxxxxxxxxx wrote:

> Hi,
>
> seems there may be an issue with batching agian.
>
> If there is more than 1 modem , then the modems fight to send the  
> faxes to the same number.
>
> I had setup 2 modems on different numbers
> ttyS1
> &
> ttyS2
>
> 3 jobs come ready at exactly the same time to the same number.
>
> S1 starts sending 1 job , gets a connection.
> S2 grabs another job to the same dest and returns number busy


I cannot reproduce the problem.  I tried on a system with 2 active 
modems and on a system with 10 active modems.  I tried with the 
destination having MaxConcurrentCalls=1 and also MaxConcurrentCalls=99.

The only way that I could reproduce the problem was to set 
MaxConcurrentCalls > 1 and to have the jobs' tts be different.  Please 
double-check the tts in the sendq job file and make sure that they're 
identically the same.

> I think S1 then gets confused on the PPS, possibly because S2 had  
> fooled with one of the jobs to the same dest.
> then errors .


The PPS error appears to be receiver-related.  I don't think it has to 
do with the jobs.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*