HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Loop on fax receive through capi4hylafax



Hello,

After playing around a bit, I somehow managed to break the receiving.
I send a fax from another place in the town to hylafax at home.
From the sender side everything looks ok. The receiving system begins
to receive new faxes in a loop until capi4hylafax is stopped.
The capi4hylafax log looks like this (after stopping hylafax):

Aug 15 13:30:33.90: [ 6774]: c2faxrecv - INFO: Incoming analog call on controller 1 from 6033000001 to 000011.
Aug 15 13:30:46.10: [ 6774]: c2faxrecv - INFO: Connection established.
Aug 15 13:30:46.10: [ 6774]: c2faxrecv - INFO: 	StationID =      +49 6033 000001
Aug 15 13:30:46.10: [ 6774]: c2faxrecv - INFO: 	BaudRate  = 14400
Aug 15 13:30:46.10: [ 6774]: c2faxrecv - INFO: 	Flags     = HighRes, MMR_compr
Aug 15 13:30:46.10: [ 6774]: c2faxrecv - INFO: Write fax in path /var/spool/hylafax to file recvq/fax00083.tif.
Aug 15 13:30:56.44: [ 6774]: c2faxrecv - INFO: Page 1 was received. - Last Page!
Aug 15 13:30:59.30: [ 6774]: c2faxrecv - INFO: SESSION BEGIN 00000047 +49.6033.000011
Aug 15 13:30:59.30: [ 6774]: c2faxrecv - INFO: Incoming analog call on controller 1 from 6033000010 to 971071.
Aug 15 13:31:09.87: [ 6774]: c2faxrecv - INFO: Connection established.
Aug 15 13:31:09.87: [ 6774]: c2faxrecv - INFO: 	StationID = +49.6033.000011     
Aug 15 13:31:09.87: [ 6774]: c2faxrecv - INFO: 	BaudRate  = 9600
Aug 15 13:31:09.87: [ 6774]: c2faxrecv - INFO: 	Flags     = HighRes, No_ECM
Aug 15 13:31:09.87: [ 6774]: c2faxrecv - INFO: Write fax in path /var/spool/hylafax to file recvq/fax00084.tif.
Aug 15 13:31:11.20: [ 6774]: c2faxrecv - INFO: Connection established.
Aug 15 13:31:11.20: [ 6774]: c2faxrecv - INFO: 	StationID = +49.6033.000011     
Aug 15 13:31:11.20: [ 6774]: c2faxrecv - INFO: 	BaudRate  = 9600
Aug 15 13:31:11.20: [ 6774]: c2faxrecv - INFO: 	Flags     = HighRes, No_ECM
Aug 15 13:31:11.20: [ 6774]: c2faxrecv - INFO: Write fax in path /var/spool/hylafax to file recvq/fax00085.tif.

6033   is the area code
000001 is the sender
000010 is the main telephone number of the receiving side
000011 is the recipient

I especially wonder where 000010 comes from, because I set 000011 as
incoming and outgoing MSN.
I also disconnected all other devices from the S0 bus.
The interface is a Eicon DIVA BRI-2M-PCI.
All .tif files in recvq/ seem to be corrupt.

The first time I installed hylafax receiving worked fine, so I
removed the hylafax-server and capi4hylafax packages, moved
/var/spool/hylafax and /etc/hylafax, then reinstalled and configured
both, but I still get this strange behaviour.

Any ideas where these attempts could come from?

Regards,

Marius


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions