HylaFAX The world's most advanced open source fax server |
Mitesh,
The +FDM response from your modem indicates the your *modem* thinks that it's a data call, and faxgetty is simply doing what the modem says.
So it's just a matter of turning off adaptive answer on the modem. Maybe set "ModemAnswerCmd: AT+FCLASS=1;A".
Lee.
Mitesh P Choksi wrote:
Hello Lee and all,
Thank you for your reply.
I only turned on adaptive answer to fix the problem. It was switched off by default and it is switched off as well
Is there anyways I can find out why does the faxgetty consider it as a
data connection even though it's just a normal fax call? I am looking for
debug facilities to first understand why it happens so that I can fix it.
This is a standard installation so probably it's happened to someboy else
as well.
Hope somebody has faced this situation.
Regards,
Mitesh
On Tue, August 2, 2005 19:36, Lee Howard said:
Are you using adaptive answer intentionally? If not, then just disable adaptive answer, which is probably due to the AdaptiveAnswer and possibly an AT+FAA=1 command in your modem config.
Lee.
Mitesh P Choksi wrote:
Dear All,
I have a situation where some fax calls are answered as data connection.
I
have managed to identify specifically that when a manual fax dials in and
the sender waits for the fax tone before starting to send a fax,
hylafax/faxgetty considers it as a data call. Session trace shows:
Aug 02 17:14:40.16: [ 3733]: SESSION BEGIN 000000260 255222180623
Aug 02 17:14:40.16: [ 3733]: HylaFAX (tm) Version 4.2.1
Aug 02 17:14:40.16: [ 3733]: <-- [4:ATA\r]
Aug 02 17:14:58.08: [ 3733]: --> [4:+FDM]
Aug 02 17:14:58.09: [ 3733]: ANSWER: DATA CONNECTION
Aug 02 17:14:58.09: [ 3733]: runGetty::initgroups: Operation not
permitted
Aug 02 17:14:58.09: [ 3733]: GETTY: START "/sbin/mgetty -h ttyS0
dx_38400", pid 3756
Aug 02 17:14:58.09: [ 3733]: GETTY: exit status 01000
Aug 02 17:14:58.09: [ 3733]: SESSION END
Hylafax binary: HylaFAX version 4.2.1 built Fri Feb 4 14:28:50 EST 2005
for i686-pc-linux-gnu (downloaded from site for RH9)
Whitebox Enterprise Linux 3.0: Linux faxserver 2.4.21-4.EL #1 Sat Dec 13
19:47:38 CST 2003 i686 i686 i386 GNU/Linux
Modem: US Robotics Sportster 33.6
I have tried to fix it by adding following in config.ttyS0 either of the
one:
1. AdaptiveAnswer=Yes, AnswerRotary=fax
2. ModemAnswerFaxCmd=ATA
Any help will be appreciated.
Regards,
Murli
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about expensive HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*