[hylafax-users] Faxgetty cannot send fax and always say LOCKWAIT

[Barry Leung <barryleung@xxxxxxxxxxx>]

 I am using HylaFAX v4.2.1  under Linux RedHat 7.3 with gcc 2.96 MODEM
ROCKWELL RC288DPi/ACF3_V1.900E-V90_P21_FSH

For receiving fax, no problem.

But when I try to send fax (I am using WHFC v1.2.3 on Win2000), the
server won't send.

I get the see /var/log/messages and it always tells me "LOCKWAIT" for a
lot of times

it doesn't dial and report any error.

I have try to reboot the server, modem.
And even try to reinstall the whole program, but no help.

Who can help me??



Aug  1 19:56:58 icsl FaxQueuer[2452]: SUBMIT JOB 5
Aug  1 19:56:58 icsl FaxGetty[2464]: LOCKWAIT
Aug  1 19:56:58 icsl last message repeated 36 times
Aug  1 19:57:30 icsl FaxGetty[2464]: MODEM set DTR OFF
Aug  1 19:57:30 icsl FaxGetty[2464]: DELAY 75 ms
Aug  1 19:57:30 icsl FaxGetty[2464]: MODEM set DTR ON
Aug  1 19:57:30 icsl FaxGetty[2464]: DELAY 2600 ms
Aug  1 19:57:33 icsl FaxGetty[2464]: MODEM set baud rate: 19200 baud,
input flow RTS/CTS, output flow RTS/CTS
Aug  1 19:57:33 icsl FaxGetty[2464]: DELAY 10 ms
Aug  1 19:57:33 icsl FaxGetty[2464]: MODEM flush i/o
Aug  1 19:57:33 icsl FaxGetty[2464]: <-- [4:ATZ\r]
Aug  1 19:57:33 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:33 icsl FaxGetty[2464]: DELAY 3000 ms
Aug  1 19:57:36 icsl FaxGetty[2464]: MODEM flush i/o
Aug  1 19:57:36 icsl FaxGetty[2464]: <-- [7:ATS0=0\r]
Aug  1 19:57:36 icsl FaxGetty[2464]: --> [6:ATS0=0]
Aug  1 19:57:36 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:36 icsl FaxGetty[2464]: <-- [5:ATE0\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [4:ATE0]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [5:ATV1\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [5:ATQ0\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [7:ATS8=2\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [8:ATS7=60\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [6:AT&K3\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [6:AT&D2\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [6:AT&C1\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [12:AT+FCLASS=?\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [12:0,1,1.0,8,10]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [12:AT+FCLASS=1\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [5:ATI3\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [24:ACF3_V1.900E-V90_P21_FSH]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [9:AT+FTM=?\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [9:AT+FRM=?\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: MODEM ROCKWELL
RC288DPi/ACF3_V1.900E-V90_P21_FSH
Aug  1 19:57:37 icsl FaxGetty[2464]: <-- [5:ATM0\r]
Aug  1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug  1 19:57:37 icsl FaxGetty[2464]: MODEM input buffering disabled




config.ttyS0 --------------------------------------------

CountryCode:            852
FAXNumber:              21161234
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          0x4f
SessionTracing:         0x4f
RecvFileMode:           0666
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        Innotech
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use this to supply a hint
ModemRate:              19200           # rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&K0           # setup no flow control
ModemHardFlowCmd:       AT&K3           # setup hardware flow control
ModemSoftFlowCmd:       AT&K4           # setup software flow control
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier
(or not)
#
ModemMfrQueryCmd:       !Rockwell
ModemModelQueryCmd:     !RC288DPi
ModemRevQueryCmd:       ATI3            # product information
#
ModemDialCmd:           ATDT%s          # T for tone dialing




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*