HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Login error 530 with hylafax 4.2.1


just a quick tip Frank,

you might not want to do this:

^frank@xxxxxxxxxxxx:1000:kIe1KgFAVL1t2
^katharina@xxxxxxxxxxxx:1001:7URNTzO5a0pCg
^katharina@xxxxxxxxxxxx$::SFOahcYRKpozU
^katharina@xxxxxxxxxxxx$::/Fc7GSBIRf/4k
^katharina@xxxxxxxxxxxx$::d4JnYYgEP6S6s
^frank@xxxxxxxxxxxx$::sT6A7gyzwuBhM
^frank@xxxxxxxxxxxx$::3WAHEcwvbiYks
^frank@xxxxxxxxxxxx$::8Fm4lgA4uP9

as it gives all your password hashes away.

try something simple first.
1. you seem to have a duplicate IPaddress for your server & 2 of your clients?
192.168.0.18

anyway
2. empty your hosts file ( back it up first)

then enter something simple

such as
faxadduser -p XXXXXXX -u faxusers

now from the server try to send a fax.
if that works :
log into a client and using the above password & user , send a fax.

that should work, you don't need the ipaddresses, we can add them later.

what it may be is that you are running a dhcp server and that is issuing different ip addresses for the clients.
if that is the case, then your system is 100% correctly rejecting the logins.




On Jul 29, 2005, at 3:37 PM, Frank Geschner wrote:

Hello everybody,

a few days ago I already submitted this request. But there was no
response. Most likely, the problem is too simple to deal with it. If
this is the cause I would appreciate it if anybody could point me out
the problem. Also, I could not solve the problem by reading the FAQ.

After updating to hylafax version is 4.2.1 at the server 192.168.0.18. I
want to access to hylafax by Windows and Linux clients whfc and pyla.
But it doesn't work.

I Added the follwing users by faxaddusers:

kaefer:~# faxadduser -p xxxxxxx -h 192.168.0.16 katharina
kaefer:~# faxadduser -p xxxxxxx -h 192.168.0.17 katharina
kaefer:~# faxadduser -p xxxxxxx -h 192.168.0.18 katharina
kaefer:~# faxadduser -p yyyyyy -h 192.168.0.16 frank
kaefer:~# faxadduser -p yyyyyy -h 192.168.0.17 frank
kaefer:~# faxadduser -p yyyyyy -h 192.168.0.18 frank

The used passwords are simultaneously the login passwords. After
restarting hylafax I have expected that I can access to hylafax by using
the above defined passwords. But far from it. At the server 192.168.0.18
I entered the following command as the user frank to get the status of
hylafax. Afterwards I entered the according password and I got the below
displayed error message:

frank@kaefer:~$ faxstat
Password:
Login failed: 530 Login incorrect.

The same input as root results in:

kaefer:~# faxstat
Password:
HylaFAX scheduler on kaefer.akw: Running
Modem ttyS1 (+49.AAAAA.BBBB): Running and idle
kaefer:~#

The hosts file contains the following:

kaefer:~# cat /etc/hylafax/hosts.hfaxd
localhost:21::
^frank@xxxxxxxxxxxx:1000:kIe1KgFAVL1t2
^katharina@xxxxxxxxxxxx:1001:7URNTzO5a0pCg
^katharina@xxxxxxxxxxxx$::SFOahcYRKpozU
^katharina@xxxxxxxxxxxx$::/Fc7GSBIRf/4k
^katharina@xxxxxxxxxxxx$::d4JnYYgEP6S6s
^frank@xxxxxxxxxxxx$::sT6A7gyzwuBhM
^frank@xxxxxxxxxxxx$::3WAHEcwvbiYks
^frank@xxxxxxxxxxxx$::8Fm4lgA4uP99A

I have tried a lot of combinations but nothing helps to solve my
problem. Can anybody of you give me an advice what I can do.

I would be very very grateful of every little help. Thanks in advance.

Regards
Frank


____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/ lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < / dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*







____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Project hosted by iFAX Solutions