[hylafax-users] Failed to properly detect high-speed data carrier

[Matthias Reich <rei@xxxxxxxx>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi list,

after changing from hylafax 4.1.7 to 4.2.1 I get the above error 
from time to time when receiving faxes on a Devolo Microlink Fun II.

I had a look in the archives, but did not find a solution for that.
I read:

http://www.hylafax.org/archive/2005-03/msg00029.php


Maybe someone has an idea

TIA
Matthias


Below the transcript of the session


    Failed to properly detect high-speed data carrier.

    ---- Transcript of session follows ----

Jul 27 11:11:25.59: [ 4306]: SESSION BEGIN 000308270 497117871466
Jul 27 11:11:25.59: [ 4306]: HylaFAX (tm) Version 4.2.1
Jul 27 11:11:25.59: [ 4306]: <-- [4:ATA\r]
Jul 27 11:11:30.94: [ 4306]: --> [7:CONNECT]
Jul 27 11:11:30.94: [ 4306]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyUSB2'
Jul 27 11:11:30.94: [ 4306]: MODEM input buffering enabled
Jul 27 11:11:30.95: [ 4306]: RECV FAX: begin
Jul 27 11:11:30.95: [ 4306]: MODEM input buffering disabled
Jul 27 11:11:30.95: [ 4306]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 
1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C>
Jul 27 11:11:31.84: [ 4306]: --> [7:CONNECT]
Jul 27 11:11:31.84: [ 4306]: <-- HDLC<23:FF C0 02 2A 4A 82 E2 2A 2A AA 2A CA 
04 E2 A2 04 CA F2 E2 82 12 04 04>
Jul 27 11:11:31.85: [ 4306]: --> [7:CONNECT]
Jul 27 11:11:31.85: [ 4306]: <-- HDLC<10:FF C8 01 00 76 5F 23 01 FB C0>
Jul 27 11:11:33.92: [ 4306]: --> [2:OK]
Jul 27 11:11:33.92: [ 4306]: <-- [9:AT+FRH=3\r]
Jul 27 11:11:34.73: [ 4306]: --> [7:CONNECT]
Jul 27 11:11:36.27: [ 4306]: --> HDLC<25:FF C0 C2 CC CC 8C 2C 8C 8C 6C 8C EC 
0C 04 04 04 04 04 04 04 04 04 04 A4 82>
Jul 27 11:11:36.27: [ 4306]: --> [2:OK]
Jul 27 11:11:36.27: [ 4306]: REMOTE TSI "0716114133"
Jul 27 11:11:36.27: [ 4306]: <-- [9:AT+FRH=3\r]
Jul 27 11:11:36.29: [ 4306]: --> [7:CONNECT]
Jul 27 11:11:36.62: [ 4306]: --> HDLC<12:FF C8 C1 00 46 1F 23 01 01 00 D8 15>
Jul 27 11:11:36.62: [ 4306]: --> [2:OK]
Jul 27 11:11:36.62: [ 4306]: REMOTE wants 14400 bit/s
Jul 27 11:11:36.62: [ 4306]: REMOTE wants A4 page width (215 mm)
Jul 27 11:11:36.62: [ 4306]: REMOTE wants unlimited page length
Jul 27 11:11:36.62: [ 4306]: REMOTE wants 7.7 line/mm
Jul 27 11:11:36.62: [ 4306]: REMOTE wants 2-D MMR
Jul 27 11:11:36.62: [ 4306]: REMOTE wants T.30 Annex A, 256-byte ECM
Jul 27 11:11:36.62: [ 4306]: RECV training at v.17 14400 bit/s
Jul 27 11:11:36.62: [ 4306]: <-- [11:AT+FRM=145\r]
Jul 27 11:11:38.33: [ 4306]: --> [7:CONNECT]
Jul 27 11:11:39.86: [ 4306]: RECV: TCF 2702 bytes, 0% non-zero, 2679 zero-run
Jul 27 11:11:39.86: [ 4306]: --> [10:NO CARRIER]
Jul 27 11:11:39.86: [ 4306]: DELAY 75 ms
Jul 27 11:11:39.93: [ 4306]: TRAINING succeeded
Jul 27 11:11:39.93: [ 4306]: <-- [9:AT+FTH=3\r]
Jul 27 11:11:40.00: [ 4306]: --> [7:CONNECT]
Jul 27 11:11:40.00: [ 4306]: <-- HDLC<3:FF C8 21>
Jul 27 11:11:41.25: [ 4306]: --> [2:OK]
Jul 27 11:11:41.25: [ 4306]: MODEM input buffering enabled
Jul 27 11:11:41.26: [ 4306]: <-- [11:AT+FRM=146\r]
Jul 27 11:11:41.69: [ 4306]: --> [8:+FCERROR]
Jul 27 11:11:41.69: [ 4306]: <-- [11:AT+FRM=146\r]
Jul 27 11:11:42.04: [ 4306]: --> [8:+FCERROR]
Jul 27 11:11:42.04: [ 4306]: <-- [11:AT+FRM=146\r]
Jul 27 11:11:42.39: [ 4306]: --> [8:+FCERROR]
Jul 27 11:11:42.39: [ 4306]: <-- [11:AT+FRM=146\r]
Jul 27 11:11:49.39: [ 4306]: MODEM TIMEOUT: reading line from modem
Jul 27 11:11:49.50: [ 4306]: --> [2:OK]
Jul 27 11:11:49.50: [ 4306]: MODEM input buffering disabled
Jul 27 11:11:49.51: [ 4306]: DELAY 70 ms
Jul 27 11:11:49.58: [ 4306]: RECV FAX (000308270): from 0716114133, page 1 in 
0:10, INF, 7.7 line/mm, 2-D MMR, 14400 bit/s
Jul 27 11:11:49.58: [ 4306]: RECV FAX (000308270): recvq/fax000061177.tif from 
0716114133, route to <unspecified>, 1 pages in 0:19
Jul 27 11:11:49.58: [ 4306]: RECV FAX: Failed to properly detect high-speed 
data carrier.
Jul 27 11:11:49.58: [ 4306]: <-- [9:AT+FTH=3\r]
Jul 27 11:11:49.66: [ 4306]: --> [7:CONNECT]
Jul 27 11:11:49.66: [ 4306]: <-- HDLC<3:FF C8 5F>
Jul 27 11:11:50.90: [ 4306]: --> [2:OK]
Jul 27 11:11:50.90: [ 4306]: MODEM input buffering enabled
Jul 27 11:11:50.91: [ 4306]: RECV FAX (000308270): session with 0716114133 
terminated abnormally: Failed to properly detect high-speed data carrier.
Jul 27 11:11:50.91: [ 4306]: RECV FAX: bin/faxrcvd.hagos 
"recvq/fax000061177.tif" "ttyUSB2" "000308270" "Failed to properly detect 
high-speed data carrier." "" ""
Jul 27 11:11:50.91: [ 4306]: RECV FAX: end
Jul 27 11:11:50.91: [ 4306]: SESSION END
- -- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880535
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@xxxxxxxx
Germany
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)

iD8DBQFC51YocjMVLPQ5oUkRAskhAJ9b++0ONmmIk2yCapVxMPV2ITYK6wCfdGmK
tvE7qqYnNczBgBFoxvcJWJQ=
=VVof
-----END PGP SIGNATURE-----

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*