[hylafax-users] hylalax can ot negotiate MPS

[Rance Hall <rhall@xxxxxxxxxxxxxxxxxx>]

Ive attached my transcript of a fax session and it fails on additional 
pages, Hylafax can not negotiate an MPS, im sending to another hylafax 
server and when it recieves from other fax machines it can, so im 
guessing I can not since Ive got a new install.

same log also indicated that the default page size is A4

I think it should probably be letter.

Can someone tell me, or point me toward, a solution for both of these 
problems

Rance

   ---- Transcript of session follows ----

Jun 24 16:11:11.43: [25793]: SESSION BEGIN 000000036 18012552309
Jun 24 16:11:11.43: [25793]: HylaFAX (tm) Version 4.2.1
Jun 24 16:11:11.43: [25793]: SEND FAX: JOB 12 DEST 8012552309 COMMID 000000036 DEVICE '/dev/ttyS0'
Jun 24 16:11:11.43: [25793]: <-- [9:AT+FLO=2\r]
Jun 24 16:11:11.68: [25793]: --> [2:OK]
Jun 24 16:11:11.68: [25793]: <-- [9:AT+FPP=0\r]
Jun 24 16:11:11.92: [25793]: --> [2:OK]
Jun 24 16:11:11.92: [25793]: <-- [9:AT+FBO=0\r]
Jun 24 16:11:12.16: [25793]: --> [2:OK]
Jun 24 16:11:12.16: [25793]: <-- [10:AT+FCT=30\r]
Jun 24 16:11:12.40: [25793]: --> [2:OK]
Jun 24 16:11:12.40: [25793]: <-- [15:AT+FNR=1,1,1,0\r]
Jun 24 16:11:12.65: [25793]: --> [2:OK]
Jun 24 16:11:12.65: [25793]: <-- [9:AT+FIE=0\r]
Jun 24 16:11:12.89: [25793]: --> [2:OK]
Jun 24 16:11:12.89: [25793]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Jun 24 16:11:13.14: [25793]: --> [2:OK]
Jun 24 16:11:13.14: [25793]: DIAL 18012552309,,218
Jun 24 16:11:13.14: [25793]: <-- [21:ATDT18012552309,,218\r]
Jun 24 16:11:30.23: [25793]: --> [4:+FCO]
Jun 24 16:11:33.29: [25793]: --> [27:+FCI:"          8012552309"]
Jun 24 16:11:33.29: [25793]: REMOTE CSI "8012552309"
Jun 24 16:11:33.29: [25793]: --> [20:+FIS:1,5,0,2,1,0,0,4]
Jun 24 16:11:33.29: [25793]: --> [2:OK]
Jun 24 16:11:33.29: [25793]: REMOTE best rate 14400 bit/s
Jun 24 16:11:33.29: [25793]: REMOTE max A4 page width (215 mm)
Jun 24 16:11:33.29: [25793]: REMOTE max unlimited page length
Jun 24 16:11:33.29: [25793]: REMOTE best vres 7.7 line/mm
Jun 24 16:11:33.29: [25793]: REMOTE best format 2-D MR
Jun 24 16:11:33.29: [25793]: REMOTE best 20 ms, 10 ms/scanline
Jun 24 16:11:33.29: [25793]: USE 14400 bit/s
Jun 24 16:11:33.29: [25793]: USE 20 ms, 10 ms/scanline
Jun 24 16:11:33.29: [25793]: SEND file "docq/doc12.ps;30"
Jun 24 16:11:33.29: [25793]: USE A4 page width (215 mm)
Jun 24 16:11:33.29: [25793]: USE unlimited page length
Jun 24 16:11:33.29: [25793]: USE 3.85 line/mm
Jun 24 16:11:33.29: [25793]: USE 1-D MH
Jun 24 16:11:33.29: [25793]: <-- [23:AT+FIS=0,5,0,2,0,0,0,4\r]
Jun 24 16:11:33.54: [25793]: --> [2:OK]
Jun 24 16:11:33.54: [25793]: <-- [7:AT+FDT\r]
Jun 24 16:11:33.82: [25793]: --> [20:+FCS:0,5,0,2,0,0,0,4]
Jun 24 16:11:40.39: [25793]: --> [7:CONNECT]
Jun 24 16:11:40.39: [25793]: SEND begin page
Jun 24 16:12:10.39: [25793]: SENT 44592 bytes of data
Jun 24 16:12:10.39: [25793]: SEND 1D RTC
Jun 24 16:12:10.39: [25793]: SEND end page
Jun 24 16:12:10.39: [25793]: SEND send MPS (more pages, same document)
Jun 24 16:12:29.53: [25793]: --> [7:+FHS:52]
Jun 24 16:12:29.53: [25793]: REMOTE HANGUP: No response to MPS repeated 3 times (code 52)
Jun 24 16:12:29.53: [25793]: <-- [5:ATH0\r]
Jun 24 16:12:29.66: [25793]: --> [2:OK]
Jun 24 16:12:29.66: [25793]: SESSION END


--

Rance Hall
System Administrator
Nebraska Turkey Growers Cooperative
rhall@xxxxxxxxxxxxxxxxxx
1-308-468-5711 Ext. 106



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*