HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Cant seem to get caller ID working.



I have a HylaFax server on a SuSe 9.2 box. I used MiniCom to verify that Caller ID was getting passed to HylaFax when a call came and the included logfile shows this as well. When faxrcvd is called the parameters for caller ID are blank. Can anyone give me some insight into what is going wrong?

Here is the logfile for the fax in question:


Jun 21 11:05:55.34: [ 9229]: HylaFAX (tm) Version 4.2.0
Jun 21 11:05:55.34: [ 9229]: <-- [4:ATA\r]
Jun 21 11:06:03.05: [ 9229]: --> [4:+FCO]
Jun 21 11:06:03.05: [ 9229]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Jun 21 11:06:03.05: [ 9229]: STATE CHANGE: ANSWERING -> RECEIVING
Jun 21 11:06:03.05: [ 9229]: MODEM input buffering enabled
Jun 21 11:06:03.05: [ 9229]: RECV FAX: begin
Jun 21 11:06:03.05: [ 9229]: RECV FAX: CDPN
Jun 21 11:06:04.72: [ 9229]: --> [27:+FTI:" 7349994444"]
Jun 21 11:06:04.73: [ 9229]: REMOTE TSI "7349994444"
Jun 21 11:06:05.00: [ 9229]: --> [20:+FCS:0,5,0,2,0,0,0,1]
Jun 21 11:06:05.00: [ 9229]: REMOTE wants 14400 bit/s
Jun 21 11:06:05.00: [ 9229]: REMOTE wants A4 page width (215 mm)
Jun 21 11:06:05.00: [ 9229]: REMOTE wants unlimited page length
Jun 21 11:06:05.00: [ 9229]: REMOTE wants 3.85 line/mm
Jun 21 11:06:05.00: [ 9229]: REMOTE wants 1-D MH
Jun 21 11:06:05.10: [ 9229]: --> [2:OK]
Jun 21 11:06:05.10: [ 9229]: <-- [7:AT+FDR\r]
Jun 21 11:06:05.43: [ 9229]: --> [11:DATE = 0621]
Jun 21 11:06:05.43: [ 9229]: --> [11:TIME = 1103]
Jun 21 11:06:05.43: [ 9229]: --> [18:NMBR = OUT OF AREA]
Jun 21 11:06:05.43: [ 9229]: --> [18:NAME = Fax Machine]
Jun 21 11:06:10.30: [ 9229]: --> [4:¤<85>HH]
Jun 21 11:06:10.30: [ 9229]: --> [7:CONNECT]
Jun 21 11:06:10.30: [ 9229]: RECV: begin page
Jun 21 11:06:10.30: [ 9229]: RECV: send trigger 022
Jun 21 11:06:10.30: [ 9229]: <-- data [1]
Jun 21 11:06:10.30: [ 9229]: Copy quality checking performed by host
Jun 21 11:06:35.48: [ 9229]: RECV/CQ: Bad 1D pixel count, row 1076, got 0, expected 1728
Jun 21 11:06:35.48: [ 9229]: RECV/CQ: Bad 1D pixel count, row 1077, got 0, expected 1728
Jun 21 11:06:35.48: [ 9229]: RECV/CQ: Bad 1D pixel count, row 1078, got 0, expected 1728
Jun 21 11:06:35.48: [ 9229]: RECV/CQ: Bad 1D pixel count, row 1079, got 0, expected 1728
Jun 21 11:06:36.97: [ 9229]: RECV/CQ: Adjusting for RTC found at row 1076
Jun 21 11:06:36.97: [ 9229]: RECV: 1076 total lines, 0 bad lines, 0 consecutive bad lines
Jun 21 11:06:36.97: [ 9229]: --> [17:+FPS:1,1088,0,0,0]
Jun 21 11:06:41.20: [ 9229]: --> [6:+FET:2]
Jun 21 11:06:41.21: [ 9229]: RECV recv EOP (no more pages or documents)
Jun 21 11:06:41.21: [ 9229]: --> [2:OK]
Jun 21 11:06:41.21: [ 9229]: RECV send MCF (message confirmation)
Jun 21 11:06:41.21: [ 9229]: RECV FAX (000000103): from 7349994444, page 1 in 0:36, INF, 3.85 line/mm, 1-D MH, 14400 bit/s
Jun 21 11:06:41.21: [ 9229]: RECV FAX (000000103): recvq/fax000000015.tif from 7349994444, route to <unspecified>, 1 pages in 0:38
Jun 21 11:06:41.21: [ 9229]: <-- [7:AT+FDR\r]
Jun 21 11:06:44.19: [ 9229]: --> [7:+FHS:00]
Jun 21 11:06:44.19: [ 9229]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Jun 21 11:06:44.19: [ 9229]: RECV FAX: bin/faxrcvd "recvq/fax000000015.tif" "ttyS0" "000000103" "" "" "" ""
Jun 21 11:06:44.19: [ 9229]: RECV FAX: end
Jun 21 11:06:44.19: [ 9229]: SESSION END



____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions