[hylafax-users] Cover Page problem

[Bruce Ackerson <bruce@xxxxxxxxxxxx>]

Hi All,

Whenever I try to use a cover page from a file (even using the default page provided) I receive the following emai.  (If I don't check the box to use a cover page it works fine)l:
********************************
From: 	  fax@xxxxxxxxxxxxxxxxxxxxx
Subject: 	facsimile job 198 to 272-7049 failed
	Date: 	June 14, 2005 10:04:00 AM MDT
To: 	  bruce@xxxxxxxxxxxxx

Your facsimile job to 272-7049 was not sent because document conversion
to facsimile failed.  The output from the converter program was:\n
Could not reopen converted document to verify format \n
Check any PostScript documents for non-standard fonts and invalid constructs

---- Unsent job status ----

Destination: 272-7049
JobID: 198
GroupID: 198
Sender: Bruce Ackerson
Mailaddr: bruce@xxxxxxxxxxxxx
Submitted From: 10.8.0.10
Page Width: 194 (mm)
Page Length: 281 (mm)
Resolution: 98 (lpi)
Status: Could not reopen converted document to verify format
Dialogs: 0 (exchanges with remote device)
Dials: 0 (consecutive failed calls to destination)
Calls: 0 (total phone calls placed)
Pages: 0 (pages transmitted)
TotPages: 0 (total pages to transmit)
Attempts: 0 (attempts to send current page)
Dirnum: 0 (directory of next page to send)

---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc198.cover      727414 PostScript cover page
docq/doc222.ps.198      36579 Unknown document type
***********************************

attached are the test files:

Attachment: doc198.cover
Description: Binary data

Attachment: doc222.ps.198
Description: Binary data

If I try to open the file w/ GhostScript I get:

Attachment: PS Error.doc
Description: MS-Word document

Does anyone know why I would get an error in the resulting postscript cover document from the "mkcover" script?  The line in error is exactly as it appears in the mkcover script.

Regards,
Bruce