[hylafax-users] Send But no recieve

["Alban Coujard" <alban@xxxxxxxxxxx>]

In the inittab : mo:2345:respawn:/usr/sbin/faxgetty ttyS0
And some time I call faxgetty manually #fagetty ttyS0.

In don?t think I have problems with serial port, I can send fax, It's like
the modem doesn't listen the line

-----------
So, despite the errors, your modem is able to answer
the calls.
How you set the faxgetty call in inittab? Is the path
ok? If you can send then I guess there is nothing
wrong with your serial port or driver.

Pedro

--- alban Coujard <acoujard@xxxxxxxxxxx> wrote:

> When I do [root@amonbofis hylafax-4.2.1]# faxanswer
> ttyS0
> 
> I have got this:
> 
> [root@amonbofis hylafax-4.2.1]# cat
> /var/spool/hylafax/log/c000000002
> jun 01 16:19:00.50: [26023]: SESSION BEGIN 000000002
> 384494804
> jun 01 16:19:00.50: [26023]: HylaFAX (tm) Version
> 4.2.0
> jun 01 16:19:00.50: [26023]: <-- [13:AT+FCLASS=1A\r]
> jun 01 16:19:05.28: [26023]: --> [7:CONNECT]
> jun 01 16:19:05.28: [26023]: ANSWER: FAX CONNECTION 
> DEVICE '/dev/ttyS0'
> jun 01 16:19:05.28: [26023]: RECV FAX: begin
> jun 01 16:19:05.28: [26023]: <-- data [32]
> jun 01 16:19:05.28: [26023]: <-- data [2]
> jun 01 16:19:05.35: [26023]: --> [7:CONNECT]
> jun 01 16:19:05.35: [26023]: <-- data [23]
> jun 01 16:19:05.35: [26023]: <-- data [2]
> jun 01 16:19:06.07: [26023]: --> [7:CONNECT]
> jun 01 16:19:06.07: [26023]: <-- data [10]
> jun 01 16:19:06.07: [26023]: <-- data [2]
> jun 01 16:19:08.25: [26023]: --> [2:OK]
> jun 01 16:19:08.25: [26023]: <-- [9:AT+FRH=3\r]
> jun 01 16:19:11.35: [26023]: --> [0:]
> jun 01 16:19:11.35: [26023]: MODEM <Empty line>
> jun 01 16:19:11.35: [26023]: <-- data [1]
> jun 01 16:19:11.36: [26023]: --> [2:OK]
> jun 01 16:19:11.36: [26023]: DELAY 1500 ms
> jun 01 16:19:12.86: [26023]: <-- [9:AT+FTH=3\r]
> jun 01 16:19:12.89: [26023]: --> [7:CONNECT]
> jun 01 16:19:12.89: [26023]: <-- data [32]
> jun 01 16:19:12.89: [26023]: <-- data [2]
> jun 01 16:19:13.06: [26023]: --> [7:CONNECT]
> jun 01 16:19:13.06: [26023]: <-- data [23]
> jun 01 16:19:13.06: [26023]: <-- data [2]
> jun 01 16:19:13.78: [26023]: --> [7:CONNECT]
> jun 01 16:19:13.78: [26023]: <-- data [10]
> jun 01 16:19:13.78: [26023]: <-- data [2]
> jun 01 16:19:15.96: [26023]: --> [2:OK]
> jun 01 16:19:15.96: [26023]: <-- [9:AT+FRH=3\r]
> jun 01 16:19:19.07: [26023]: --> [0:]
> jun 01 16:19:19.07: [26023]: MODEM <Empty line>
> jun 01 16:19:19.07: [26023]: <-- data [1]
> jun 01 16:19:19.07: [26023]: --> [2:OK]
> jun 01 16:19:19.07: [26023]: DELAY 1500 ms
> jun 01 16:19:20.59: [26023]: <-- [9:AT+FTH=3\r]
> jun 01 16:19:20.63: [26023]: --> [7:CONNECT]
> jun 01 16:19:20.63: [26023]: <-- data [32]
> jun 01 16:19:20.63: [26023]: <-- data [2]
> jun 01 16:19:20.79: [26023]: --> [7:CONNECT]
> jun 01 16:19:20.79: [26023]: <-- data [23]
> jun 01 16:19:20.79: [26023]: <-- data [2]
> jun 01 16:19:21.51: [26023]: --> [7:CONNECT]
> jun 01 16:19:21.51: [26023]: <-- data [10]
> jun 01 16:19:21.51: [26023]: <-- data [2]
> jun 01 16:19:23.70: [26023]: --> [2:OK]
> jun 01 16:19:23.70: [26023]: <-- [9:AT+FRH=3\r]
> jun 01 16:19:26.80: [26023]: --> [0:]
> jun 01 16:19:26.80: [26023]: MODEM <Empty line>
> jun 01 16:19:26.80: [26023]: <-- data [1]
> jun 01 16:19:26.81: [26023]: --> [2:OK]
> jun 01 16:19:26.81: [26023]: DELAY 1500 ms
> jun 01 16:19:28.31: [26023]: <-- [9:AT+FTH=3\r]
> jun 01 16:19:28.34: [26023]: --> [7:CONNECT]
> jun 01 16:19:28.34: [26023]: <-- data [32]
> jun 01 16:19:28.34: [26023]: <-- data [2]
> jun 01 16:19:28.51: [26023]: --> [7:CONNECT]
> jun 01 16:19:28.51: [26023]: <-- data [23]
> jun 01 16:19:28.51: [26023]: <-- data [2]
> jun 01 16:19:29.23: [26023]: --> [7:CONNECT]
> jun 01 16:19:29.23: [26023]: <-- data [10]
> jun 01 16:19:29.23: [26023]: <-- data [2]
> jun 01 16:19:31.41: [26023]: --> [2:OK]
> jun 01 16:19:31.41: [26023]: <-- [9:AT+FRH=3\r]
> jun 01 16:19:34.51: [26023]: --> [0:]
> jun 01 16:19:34.51: [26023]: MODEM <Empty line>
> jun 01 16:19:34.51: [26023]: <-- data [1]
> jun 01 16:19:34.52: [26023]: --> [2:OK]
> jun 01 16:19:34.52: [26023]: DELAY 1500 ms
> jun 01 16:19:36.02: [26023]: <-- [9:AT+FTH=3\r]
> jun 01 16:19:36.05: [26023]: --> [7:CONNECT]
> jun 01 16:19:36.05: [26023]: <-- data [32]
> jun 01 16:19:36.05: [26023]: <-- data [2]
> jun 01 16:19:36.22: [26023]: --> [7:CONNECT]
> jun 01 16:19:36.22: [26023]: <-- data [23]
> jun 01 16:19:36.22: [26023]: <-- data [2]
> jun 01 16:19:36.94: [26023]: --> [7:CONNECT]
> jun 01 16:19:36.94: [26023]: <-- data [10]
> jun 01 16:19:36.94: [26023]: <-- data [2]
> jun 01 16:19:39.12: [26023]: --> [2:OK]
> jun 01 16:19:39.12: [26023]: <-- [9:AT+FRH=3\r]
> jun 01 16:19:42.22: [26023]: --> [0:]
> jun 01 16:19:42.22: [26023]: MODEM <Empty line>
> jun 01 16:19:42.22: [26023]: <-- data [1]
> jun 01 16:19:42.23: [26023]: --> [2:OK]
> jun 01 16:19:42.23: [26023]: DELAY 1500 ms
> jun 01 16:19:43.73: [26023]: <-- [9:AT+FTH=3\r]
> jun 01 16:19:43.77: [26023]: --> [7:CONNECT]
> jun 01 16:19:43.77: [26023]: <-- data [32]
> jun 01 16:19:43.77: [26023]: <-- data [2]
> jun 01 16:19:43.93: [26023]: --> [7:CONNECT]
> jun 01 16:19:43.93: [26023]: <-- data [23]
> jun 01 16:19:43.93: [26023]: <-- data [2]
> jun 01 16:19:44.65: [26023]: --> [7:CONNECT]
> jun 01 16:19:44.65: [26023]: <-- data [10]
> jun 01 16:19:44.65: [26023]: <-- data [2]
> jun 01 16:19:46.84: [26023]: --> [2:OK]
> jun 01 16:19:46.84: [26023]: <-- [9:AT+FRH=3\r]
> jun 01 16:19:49.94: [26023]: --> [0:]
> jun 01 16:19:49.94: [26023]: MODEM <Empty line>
> jun 01 16:19:49.94: [26023]: <-- data [1]
> jun 01 16:19:49.95: [26023]: --> [2:OK]
> jun 01 16:19:49.95: [26023]: RECV FAX: No answer
> (T.30 T1 timeout)
> jun 01 16:19:49.95: [26023]: RECV FAX: end
> jun 01 16:19:49.95: [26023]: SESSION END
> 
> 
> >Yes with a fax machine, I can send fax and recieve
> with the fax machine, and
> >sand with halyfax
> 
> Le mercredi 1 Juin 2005 14:27, vous avez écrit :
> > Have you tested the line with a fax machine or a
> > different modem?
> >
> > --- alban Coujard <acoujard@xxxxxxxxxxx> wrote:
> > > Yes , When I call the fax number it ring but the
> > > moden do not respond
> > >
> > > Le mercredi 1 Juin 2005 13:54, vous avez écrit :
> > > > Did you rerun init? Ie, init q?
> > > >
> > > > --- alban Coujard <acoujard@xxxxxxxxxxx>
> wrote:
> > > > > Hello
> > > > >
> > > > > I used a USR Sportster Voice 33.6 Fax Modem,
> I
> > >
> > > can
> > >
> > > > > send Fax but Can't
> > > > > receive... On a mandrake 10.1, the modem is
> on
> > >
> > > the
> > >
> > > > > serial port 2 (ttyS1),
> > > > > hylafax 4.2,
> > > > >
> > > > > I dont forget to do #faxgetty ttyS1
> > > > >
> > > > > My config.ttyS1 file is :
> > > > >
> > > > > CountryCode:            33
> > > > > AreaCode:               3
> > > > > FAXNumber:              +33.03.xxxxxxxx
> > > > > LongDistancePrefix:     0
> > > > > InternationalPrefix:    00
> > > > > DialStringRules:        etc/dialrules
> > > > > ServerTracing:          1
> > > > > SessionTracing:         11
> > > > > RecvFileMode:           0600
> > > > > LogFileMode:            0600
> > > > > DeviceMode:             0600
> > > > > RingsBeforeAnswer:      1
> > > > > SpeakerVolume:          quiet
> > > > > GettyArgs:              "-h %l dx_%s"
> > > > > LocalIdentifier:        "NothingSetup"
> > > > > TagLineFont:            etc/lutRS18.pcf
> > > > > TagLineFormat:          "From %%l|%c|Page
> %%P of %%T"
> > > > > MaxRecvPages:           25
> > > > > #
> > > > > #
> > > > > # Modem-related stuff: should reflect modem
> > >
> > > command
> > >
> > > > > interface
> > > > > # and hardware connection/cabling (e.g. flow
> > > > > control).
> > > > > #
> > > > > ModemType:              Class1          #
> use class 1 interface
> > > > > ModemRate:              19200           #
> rate for DCE-DTE
> > >
> > > communication
> > >
> > > > > ModemFlowControl:       xonxoff         #
> software flow
> > >
> > > control
> > >
> > > > > #
> > > > > ModemSetupDTRCmd:       ATS13=1&D2      #
> setup 
=== message truncated ===


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*