[hylafax-users] Modem Wedged problem

["Mark Bennett" <Mark.Bennett@xxxxxxxxxxxxxxxxx>]

Title: Modem Wedged problem

I am having frequent "Wedged" problems with my modems (8 x Topic chipset external)

tty config is "standard topic" settings.

The modem shows carrier present, and seems unable to reset.

Typical session log is

May 26 08:38:28.40: [19372]: SESSION BEGIN 000005258 64800101811
May 26 08:38:28.40: [19372]: HylaFAX (tm) Version 4.2.1
May 26 08:38:28.40: [19372]: <-- [4:ATA\r]
May 26 08:38:34.50: [19372]: --> [7:CONNECT]
May 26 08:38:34.50: [19372]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyG000'
May 26 08:38:34.50: [19372]: RECV FAX: begin
May 26 08:38:34.51: [19372]: <-- data [32]
May 26 08:38:34.51: [19372]: <-- data [2]
May 26 08:38:34.54: [19372]: --> [7:CONNECT]
May 26 08:38:34.55: [19372]: <-- data [23]
May 26 08:38:34.55: [19372]: <-- data [2]
May 26 08:38:34.58: [19372]: --> [7:CONNECT]
May 26 08:38:34.58: [19372]: <-- data [10]
May 26 08:38:34.58: [19372]: <-- data [2]
May 26 08:38:37.69: [19372]: --> [2:OK]
May 26 08:38:37.69: [19372]: <-- [9:AT+FRH=3\r]
May 26 08:38:38.01: [19372]: --> [7:CONNECT]
May 26 08:38:39.63: [19372]: --> [2:OK]
May 26 08:38:39.63: [19372]: REMOTE TSI "64 9 xxx xxxx"
May 26 08:38:39.63: [19372]: <-- [9:AT+FRH=3\r]
May 26 08:38:39.65: [19372]: --> [7:CONNECT]
May 26 08:38:39.92: [19372]: --> [2:OK]
May 26 08:38:39.92: [19372]: REMOTE wants 14400 bit/s
May 26 08:38:39.92: [19372]: REMOTE wants A4 page width (215 mm)
May 26 08:38:39.92: [19372]: REMOTE wants unlimited page length
May 26 08:38:39.92: [19372]: REMOTE wants 3.85 line/mm
May 26 08:38:39.92: [19372]: REMOTE wants 1-D MH
May 26 08:38:39.92: [19372]: RECV training at v.17 14400 bit/s
May 26 08:38:39.93: [19372]: <-- [11:AT+FRM=145\r]
May 26 08:38:41.64: [19372]: --> [7:CONNECT]
May 26 08:38:43.43: [19372]: RECV: TCF 2520 bytes, 0% non-zero, 2520 zero-run
May 26 08:38:43.43: [19372]: --> [10:NO CARRIER]
May 26 08:38:43.43: [19372]: DELAY 75 ms
May 26 08:38:43.50: [19372]: TRAINING succeeded
May 26 08:38:43.50: [19372]: <-- [9:AT+FTH=3\r]
May 26 08:38:43.56: [19372]: --> [7:CONNECT]
May 26 08:38:43.56: [19372]: <-- data [3]
May 26 08:38:43.56: [19372]: <-- data [2]
May 26 08:38:44.87: [19372]: --> [2:OK]
May 26 08:38:44.88: [19372]: <-- [11:AT+FRM=146\r]
May 26 08:38:45.87: [19372]: --> [7:CONNECT]
May 26 08:38:45.87: [19372]: RECV: begin page
May 26 08:40:03.87: [19372]: <-- data [1]
May 26 08:40:03.87: [19372]: RECV: Missing EOL after 5 seconds
May 26 08:40:03.87: [19372]: RECV: end page
May 26 08:40:05.87: [19372]: MODEM <Timeout>
May 26 08:40:07.87: [19372]: MODEM <Empty line>
May 26 08:40:09.87: [19372]: MODEM <Empty line>
May 26 08:40:09.87: [19372]: <-- data [1]
May 26 08:40:10.07: [19372]: MODEM <Timeout>
May 26 08:40:10.07: [19372]: RECV FAX (000005258): recvq/fax000005260.tif from 64 9 626 2640, route to <unspecified>, 0 pages in 1:36

May 26 08:40:10.07: [19372]: RECV FAX: T.30 T2 timeout, expected page not received
May 26 08:40:10.07: [19372]: <-- [9:AT+FTH=3\r]
May 26 08:40:17.62: [19372]: --> [0:]
May 26 08:40:17.62: [19372]: RECV FAX (000005258): session with 64 9 626 2640 terminated abnormally: T.30 T2 timeout, expected page not received

May 26 08:40:17.62: [19372]: RECV FAX: bin/faxrcvd "recvq/fax000005260.tif" "ttyG000" "000005258" "T.30 T2 timeout, expected page not received" "" ""

May 26 08:40:17.64: [19372]: RECV FAX: end
May 26 08:40:17.64: [19372]: SESSION END