Re: [hylafax-users] Modem capabilities

[Matthias Reich <rei@xxxxxxxx>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Am Mittwoch, 20. April 2005 16:03 schrieb Lee Howard:
> On Wed, 20 Apr 2005, Matthias Reich wrote:
> > I understand that, but on my other servers with the same hylafax version
> > and the same type of modem (Multitech MT1432BG, same firmware) 2-D MR
> > works fine (config file and modem config files are equal too)
>
> HylaFAX faxq always prepared the fax image with the 1-D compression if
> there was no record in /var/spool/hylafax/info/ indicating that this
> destination supported 2-D.
>
> Is this the first time that you are faxing these destinations with this
> server?  Is there an info file in /var/spool/hylafax/info/ indicating that
> this destination supports 2-D ?
>
> Lee.
>
>
I already removed the info-file,
and tried an info-file for the detination from one of my other servers
no success.
the destination changed the fax equipment a few days ago.
I can still send faxes from 9 of my 10 servers, jsut this one won't do it.
I changed the modem too.

this is the info-file:
supportsHighRes:yes
supports2DEncoding:yes
supportsMMR:no
supportsPostScript:no
calledBefore:yes
maxPageWidth:1728
maxPageLength:65535
maxSignallingRate:"14400"
minScanlineTime:"10ms"
remoteCSI:"+49 5422 9441 14"
sendFailures:37
lastSendFailure:"No response to EOP repeated 3 times"
dialFailures:0
lastDialFailure:"Busy signal detected"

anyway I'll try some other settings, or will just route this destination to 
another server until the problem is solved.

Thanks for your advice and help

- -- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880535
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@xxxxxxxx
Germany
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)

iD8DBQFCZmWFcjMVLPQ5oUkRArDaAJoDEOgSTYfy/gEjDYQfjzQt0s9X6QCgiw9n
CqvUPnQgVbeTnH9Nks04drM=
=+8Ue
-----END PGP SIGNATURE-----

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*