Re: [hylafax-users] Modem capabilities

[Matthias Reich <rei@xxxxxxxx>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Am Dienstag, 19. April 2005 00:18 schrieb Lee Howard:
> Can I see the full log, please?
>
> Thanks.
>
> Lee.
Hi Lee,

here is the complete log:

btw, when I use another server with the same type of modem, the fax is 
transmitted 2D-MR. I have no idea, what is going an there. The transmission 
itself is ok, just at the end the receiver hangs up with code 54 instead of 
acknowledging. I put a piece of a successful log th the end of the mail.

The modem is a Multitech MT1432 BG with a standard class 2 config-file
Thanks a lot for your work

Matthias


Apr 18 15:17:37.63: [30309]: SESSION BEGIN 00092639 495422944114
Apr 18 15:17:37.63: [30309]: HylaFAX (tm) Version 4.1.7
Apr 18 15:17:37.63: [30309]: SEND FAX: JOB 11214 DEST 05422944114 COMMID 
00092639 DEVICE '/dev/ttyS2'
Apr 18 15:17:37.63: [30309]: MODEM set DTR OFF
Apr 18 15:17:37.63: [30309]: DELAY 75 ms
Apr 18 15:17:37.71: [30309]: MODEM set DTR ON
Apr 18 15:17:37.71: [30309]: DELAY 2600 ms
Apr 18 15:17:41.32: [30309]: MODEM set baud rate: 38400 baud, input flow 
RTS/CTS, output flow RTS/CTS
Apr 18 15:17:41.32: [30309]: DELAY 10 ms
Apr 18 15:17:41.33: [30309]: MODEM flush i/o
Apr 18 15:17:41.33: [30309]: <-- [4:ATZ\r]
Apr 18 15:17:41.60: [30309]: --> [3:ATZ]
Apr 18 15:17:41.60: [30309]: --> [2:OK]
Apr 18 15:17:41.60: [30309]: DELAY 3000 ms
Apr 18 15:17:44.60: [30309]: <-- [7:AT&FX3\r]
Apr 18 15:17:44.77: [30309]: --> [6:AT&FX3]
Apr 18 15:17:44.77: [30309]: --> [2:OK]
Apr 18 15:17:44.77: [30309]: <-- [5:ATE0\r]
Apr 18 15:17:44.93: [30309]: --> [4:ATE0]
Apr 18 15:17:44.93: [30309]: --> [2:OK]
Apr 18 15:17:44.93: [30309]: <-- [5:ATV1\r]
Apr 18 15:17:45.09: [30309]: --> [2:OK]
Apr 18 15:17:45.09: [30309]: <-- [5:ATQ0\r]
Apr 18 15:17:45.25: [30309]: --> [2:OK]
Apr 18 15:17:45.25: [30309]: <-- [7:ATS0=0\r]
Apr 18 15:17:45.42: [30309]: --> [2:OK]
Apr 18 15:17:45.42: [30309]: <-- [7:ATS8=2\r]
Apr 18 15:17:45.59: [30309]: --> [2:OK]
Apr 18 15:17:45.59: [30309]: <-- [8:ATS7=60\r]
Apr 18 15:17:45.76: [30309]: --> [2:OK]
Apr 18 15:17:45.76: [30309]: <-- [6:AT&E4\r]
Apr 18 15:17:45.92: [30309]: --> [2:OK]
Apr 18 15:17:45.92: [30309]: <-- [6:AT&D3\r]
Apr 18 15:17:46.08: [30309]: --> [2:OK]
Apr 18 15:17:46.08: [30309]: <-- [6:AT&C1\r]
Apr 18 15:17:46.24: [30309]: --> [2:OK]
Apr 18 15:17:46.24: [30309]: <-- [12:AT+FCLASS=2\r]
Apr 18 15:17:46.41: [30309]: --> [2:OK]
Apr 18 15:17:46.41: [30309]: <-- [10:AT+FTBC=0\r]
Apr 18 15:17:46.58: [30309]: --> [2:OK]
Apr 18 15:17:46.58: [30309]: <-- [10:AT+FBOR=0\r]
Apr 18 15:17:46.75: [30309]: --> [2:OK]
Apr 18 15:17:46.75: [30309]: <-- [13:AT+FPHCTO=30\r]
Apr 18 15:17:46.92: [30309]: --> [2:OK]
Apr 18 15:17:46.92: [30309]: <-- [10:AT+FBUG=1\r]
Apr 18 15:17:47.09: [30309]: --> [2:OK]
Apr 18 15:17:47.09: [30309]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Apr 18 15:17:47.26: [30309]: --> [2:OK]
Apr 18 15:17:47.26: [30309]: <-- [5:ATM0\r]
Apr 18 15:17:47.43: [30309]: --> [2:OK]
Apr 18 15:17:47.43: [30309]: MODEM input buffering enabled
Apr 18 15:17:47.43: [30309]: <-- [12:AT+FCLASS=2\r]
Apr 18 15:17:47.70: [30309]: --> [2:OK]
Apr 18 15:17:47.70: [30309]: <-- [10:AT+FTBC=0\r]
Apr 18 15:17:47.97: [30309]: --> [2:OK]
Apr 18 15:17:48.03: [30309]: <-- [10:AT+FBOR=0\r]
Apr 18 15:17:48.30: [30309]: --> [2:OK]
Apr 18 15:17:48.30: [30309]: <-- [13:AT+FPHCTO=30\r]
Apr 18 15:17:48.57: [30309]: --> [2:OK]
Apr 18 15:17:48.57: [30309]: <-- [10:AT+FBUG=1\r]
Apr 18 15:17:48.84: [30309]: --> [2:OK]
Apr 18 15:17:48.84: [30309]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Apr 18 15:17:49.11: [30309]: --> [2:OK]
Apr 18 15:17:49.11: [30309]: <-- [25:AT+FLID="HAGOS eG NLHAL"\r]
Apr 18 15:17:49.38: [30309]: --> [2:OK]
Apr 18 15:17:49.38: [30309]: DIAL 05422944114
Apr 18 15:17:49.38: [30309]: <-- [18:ATDT0,05422944114\r]
Apr 18 15:18:07.27: [30309]: --> [5:+FCON]
Apr 18 15:18:13.96: [30309]: --> [74:+FHR:FF 03 40 34 31 20 31 34 34 39 20 32 
32 34 35 20 39 34 2B 20 20 20 20 ]
Apr 18 15:18:14.27: [30309]: --> [32:+FHR:FF 13 80 20 EE A8 C4 80 13 ]
Apr 18 15:18:14.27: [30309]: --> [51:+FNSF:86 00 CA 00 00 E4 01 C8 40 F0 03 18 
80 00 00 ]
Apr 18 15:18:14.27: [30309]: REMOTE NSF "86 00 CA 00 00 E4 01 C8 40 F0 03 18 
80 00 00"
Apr 18 15:18:14.27: [30309]: NSF remote fax equipment: unknown 
Apr 18 15:18:14.27: [30309]: --> [28:+FCSI:"    +49 5422 9441 14"]
Apr 18 15:18:14.27: [30309]: REMOTE CSI "+49 5422 9441 14"
Apr 18 15:18:14.38: [30309]: --> [21:+FDIS:1,5,0,2,1,2,1,3]
Apr 18 15:18:14.38: [30309]: --> [2:OK]
Apr 18 15:18:14.38: [30309]: REMOTE best rate 14400 bit/s
Apr 18 15:18:14.38: [30309]: REMOTE max page width 1728 pixels in 215 mm
Apr 18 15:18:14.38: [30309]: REMOTE max unlimited page length
Apr 18 15:18:14.38: [30309]: REMOTE best vres 7.7 line/mm
Apr 18 15:18:14.38: [30309]: REMOTE best format 2-D MR
Apr 18 15:18:14.38: [30309]: REMOTE supports T.30 Annex C, half duplex ECM
Apr 18 15:18:14.38: [30309]: REMOTE best 10 ms/scanline
Apr 18 15:18:14.38: [30309]: USE 14400 bit/s
Apr 18 15:18:14.38: [30309]: USE 10 ms/scanline
Apr 18 15:18:14.38: [30309]: SEND file "docq/doc11220.ps;00"
Apr 18 15:18:14.38: [30309]: USE page width 1728 pixels in 215 mm
Apr 18 15:18:14.38: [30309]: USE unlimited page length
Apr 18 15:18:14.38: [30309]: USE 3.85 line/mm
Apr 18 15:18:14.38: [30309]: USE 1-D MR
Apr 18 15:18:14.38: [30309]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,3\r]
Apr 18 15:18:14.70: [30309]: --> [2:OK]
Apr 18 15:18:14.70: [30309]: <-- [7:AT+FDT\r]
Apr 18 15:18:15.86: [30309]: --> [74:+FHT:FF 03 43 4C 41 48 4C 4E 20 47 65 20 
53 4F 47 41 48 20 20 20 20 20 20 ]
Apr 18 15:18:16.66: [30309]: --> [26:+FHT:FF 13 83 00 22 A8 00 ]
Apr 18 15:18:21.79: [30309]: --> [14:+FHR:FF 13 84 ]
Apr 18 15:18:21.79: [30309]: --> [21:+FDCS:0,5,0,2,0,0,0,3]
Apr 18 15:18:21.79: [30309]: --> [7:CONNECT]
Apr 18 15:18:21.79: [30309]: SEND wait for XON
Apr 18 15:18:21.79: [30309]: --> [1:]
Apr 18 15:18:21.79: [30309]: SEND begin page
Apr 18 15:18:21.79: [30309]: <-- data [1031]
Apr 18 15:18:21.79: [30309]: <-- data [1024]
Apr 18 15:18:21.79: [30309]: <-- data [1024]
Apr 18 15:18:21.79: [30309]: <-- data [1024]
Apr 18 15:18:21.79: [30309]: <-- data [1024]
Apr 18 15:18:22.79: [30309]: <-- data [1024]
Apr 18 15:18:22.79: [30309]: <-- data [1024]
Apr 18 15:18:22.79: [30309]: <-- data [1024]
Apr 18 15:18:23.96: [30309]: <-- data [1024]
Apr 18 15:18:24.59: [30309]: <-- data [1024]
Apr 18 15:18:25.23: [30309]: <-- data [1024]
Apr 18 15:18:25.86: [30309]: <-- data [1024]
Apr 18 15:18:26.51: [30309]: <-- data [1024]
Apr 18 15:18:27.13: [30309]: <-- data [1024]
Apr 18 15:18:27.78: [30309]: <-- data [1024]
Apr 18 15:18:28.40: [30309]: <-- data [1024]
Apr 18 15:18:29.05: [30309]: <-- data [1024]
Apr 18 15:18:29.67: [30309]: <-- data [1024]
Apr 18 15:18:30.32: [30309]: <-- data [1025]
Apr 18 15:18:30.94: [30309]: <-- data [1024]
Apr 18 15:18:31.59: [30309]: <-- data [1024]
Apr 18 15:18:32.21: [30309]: <-- data [1024]
Apr 18 15:18:32.84: [30309]: <-- data [1025]
Apr 18 15:18:33.48: [30309]: <-- data [1025]
Apr 18 15:18:34.10: [30309]: <-- data [1026]
Apr 18 15:18:34.72: [30309]: <-- data [1025]
Apr 18 15:18:35.49: [30309]: <-- data [1026]
Apr 18 15:18:36.14: [30309]: <-- data [1025]
Apr 18 15:18:36.78: [30309]: <-- data [1025]
Apr 18 15:18:37.50: [30309]: <-- data [1026]
Apr 18 15:18:37.50: [30309]: <-- data [1024]
Apr 18 15:18:38.22: [30309]: <-- data [1024]
Apr 18 15:18:38.88: [30309]: <-- data [1024]
Apr 18 15:18:39.54: [30309]: <-- data [1024]
Apr 18 15:18:40.21: [30309]: <-- data [1025]
Apr 18 15:18:40.89: [30309]: <-- data [1025]
Apr 18 15:18:40.89: [30309]: <-- data [1024]
Apr 18 15:18:41.54: [30309]: <-- data [1026]
Apr 18 15:18:42.28: [30309]: <-- data [1028]
Apr 18 15:18:43.02: [30309]: <-- data [1026]
Apr 18 15:18:43.72: [30309]: <-- data [1024]
Apr 18 15:18:43.72: [30309]: <-- data [1024]
Apr 18 15:18:44.33: [30309]: <-- data [1025]
Apr 18 15:18:45.11: [30309]: <-- data [1025]
Apr 18 15:18:45.93: [30309]: <-- data [1024]
Apr 18 15:18:46.58: [30309]: <-- data [1024]
Apr 18 15:18:46.58: [30309]: <-- data [1024]
Apr 18 15:18:47.33: [30309]: <-- data [1025]
Apr 18 15:18:48.00: [30309]: <-- data [1026]
Apr 18 15:18:48.55: [30309]: <-- data [1024]
Apr 18 15:18:49.12: [30309]: <-- data [1024]
Apr 18 15:18:49.81: [30309]: <-- data [1029]
Apr 18 15:18:50.54: [30309]: <-- data [1024]
Apr 18 15:18:50.54: [30309]: <-- data [1025]
Apr 18 15:18:51.18: [30309]: <-- data [1027]
Apr 18 15:18:51.83: [30309]: <-- data [1024]
Apr 18 15:18:52.47: [30309]: <-- data [1025]
Apr 18 15:18:53.13: [30309]: <-- data [1024]
Apr 18 15:18:53.80: [30309]: <-- data [1026]
Apr 18 15:18:54.41: [30309]: <-- data [1026]
Apr 18 15:18:55.01: [30309]: <-- data [1025]
Apr 18 15:18:55.76: [30309]: <-- data [1024]
Apr 18 15:18:55.76: [30309]: <-- data [1025]
Apr 18 15:18:56.49: [30309]: <-- data [1024]
Apr 18 15:18:57.29: [30309]: <-- data [1026]
Apr 18 15:18:57.96: [30309]: <-- data [1024]
Apr 18 15:18:57.96: [30309]: <-- data [1026]
Apr 18 15:18:58.60: [30309]: <-- data [1026]
Apr 18 15:18:59.31: [30309]: <-- data [1028]
Apr 18 15:18:59.97: [30309]: <-- data [1029]
Apr 18 15:19:00.61: [30309]: <-- data [1029]
Apr 18 15:19:01.23: [30309]: <-- data [1025]
Apr 18 15:19:01.89: [30309]: <-- data [1025]
Apr 18 15:19:02.63: [30309]: <-- data [1032]
Apr 18 15:19:02.63: [30309]: <-- data [1028]
Apr 18 15:19:03.32: [30309]: <-- data [1025]
Apr 18 15:19:04.00: [30309]: <-- data [1025]
Apr 18 15:19:04.69: [30309]: <-- data [1028]
Apr 18 15:19:05.39: [30309]: <-- data [1024]
Apr 18 15:19:05.39: [30309]: <-- data [1029]
Apr 18 15:19:06.09: [30309]: <-- data [1025]
Apr 18 15:19:06.80: [30309]: <-- data [1024]
Apr 18 15:19:07.48: [30309]: <-- data [1025]
Apr 18 15:19:08.23: [30309]: <-- data [1024]
Apr 18 15:19:08.97: [30309]: <-- data [1024]
Apr 18 15:19:08.97: [30309]: <-- data [1027]
Apr 18 15:19:09.64: [30309]: <-- data [1026]
Apr 18 15:19:10.38: [30309]: <-- data [1025]
Apr 18 15:19:11.08: [30309]: <-- data [1025]
Apr 18 15:19:11.74: [30309]: <-- data [1024]
Apr 18 15:19:11.74: [30309]: <-- data [1024]
Apr 18 15:19:12.48: [30309]: <-- data [1026]
Apr 18 15:19:13.20: [30309]: <-- data [1026]
Apr 18 15:19:13.94: [30309]: <-- data [1027]
Apr 18 15:19:13.94: [30309]: <-- data [1026]
Apr 18 15:19:14.69: [30309]: <-- data [1024]
Apr 18 15:19:15.41: [30309]: <-- data [1024]
Apr 18 15:19:16.12: [30309]: <-- data [1026]
Apr 18 15:19:16.86: [30309]: <-- data [1024]
Apr 18 15:19:16.86: [30309]: <-- data [1025]
Apr 18 15:19:17.58: [30309]: <-- data [1024]
Apr 18 15:19:18.24: [30309]: <-- data [1024]
Apr 18 15:19:18.84: [30309]: <-- data [1024]
Apr 18 15:19:19.57: [30309]: <-- data [1025]
Apr 18 15:19:20.36: [30309]: <-- data [1025]
Apr 18 15:19:20.36: [30309]: <-- data [1025]
Apr 18 15:19:21.11: [30309]: <-- data [1025]
Apr 18 15:19:21.90: [30309]: <-- data [1024]
Apr 18 15:19:22.74: [30309]: <-- data [1025]
Apr 18 15:19:22.74: [30309]: <-- data [1024]
Apr 18 15:19:23.39: [30309]: <-- data [1024]
Apr 18 15:19:23.99: [30309]: <-- data [1024]
Apr 18 15:19:24.61: [30309]: <-- data [1024]
Apr 18 15:19:25.23: [30309]: <-- data [1024]
Apr 18 15:19:25.85: [30309]: <-- data [1024]
Apr 18 15:19:26.45: [30309]: <-- data [1024]
Apr 18 15:19:27.07: [30309]: <-- data [1024]
Apr 18 15:19:27.68: [30309]: <-- data [1024]
Apr 18 15:19:28.32: [30309]: <-- data [1024]
Apr 18 15:19:28.94: [30309]: <-- data [1024]
Apr 18 15:19:29.59: [30309]: <-- data [1024]
Apr 18 15:19:30.21: [30309]: <-- data [1024]
Apr 18 15:19:30.86: [30309]: <-- data [1024]
Apr 18 15:19:31.48: [30309]: <-- data [1024]
Apr 18 15:19:32.13: [30309]: <-- data [1024]
Apr 18 15:19:32.75: [30309]: <-- data [1024]
Apr 18 15:19:33.40: [30309]: <-- data [1024]
Apr 18 15:19:34.02: [30309]: <-- data [1024]
Apr 18 15:19:34.66: [30309]: <-- data [1024]
Apr 18 15:19:35.29: [30309]: <-- data [1024]
Apr 18 15:19:35.93: [30309]: <-- data [1024]
Apr 18 15:19:36.56: [30309]: <-- data [1024]
Apr 18 15:19:37.20: [30309]: <-- data [1024]
Apr 18 15:19:37.83: [30309]: <-- data [1024]
Apr 18 15:19:38.47: [30309]: <-- data [1024]
Apr 18 15:19:39.10: [30309]: <-- data [1024]
Apr 18 15:19:39.74: [30309]: <-- data [1024]
Apr 18 15:19:40.36: [30309]: <-- data [1024]
Apr 18 15:19:41.01: [30309]: <-- data [1024]
Apr 18 15:19:41.63: [30309]: <-- data [1024]
Apr 18 15:19:42.28: [30309]: <-- data [1024]
Apr 18 15:19:42.91: [30309]: <-- data [226]
Apr 18 15:19:42.97: [30309]: SENT 144610 bytes of data
Apr 18 15:19:42.97: [30309]: <-- data [2]
Apr 18 15:19:42.97: [30309]: SEND end page
Apr 18 15:19:45.84: [30309]: --> [244:]
Apr 18 15:19:45.84: [30309]: --> [2:OK]
Apr 18 15:19:45.84: [30309]: SEND send EOP (no more pages or documents)
Apr 18 15:19:45.84: [30309]: <-- [9:AT+FET=2\r]
Apr 18 15:19:48.44: [30309]: --> [14:+FHT:FF 13 2F ]
Apr 18 15:19:49.94: [30309]: --> [14:+FHT:FF 13 2F ]
Apr 18 15:19:51.44: [30309]: --> [14:+FHT:FF 13 2F ]
Apr 18 15:19:52.94: [30309]: --> [14:+FHT:FF 13 FB ]
Apr 18 15:19:53.41: [30309]: --> [8:+FHNG:54]
Apr 18 15:19:53.41: [30309]: REMOTE HANGUP: No response to EOP repeated 3 
times (code 54)
Apr 18 15:19:53.41: [30309]: <-- [5:ATH0\r]
Apr 18 15:19:53.91: [30309]: --> [2:OK]
Apr 18 15:19:53.91: [30309]: MODEM set DTR OFF
Apr 18 15:19:53.91: [30309]: SESSION END



Sending with 2D-MR has the same output in the log, the difference is in the 
end:
2D-MR transmission ends up:
Apr 12 10:18:25.54: [17668]: <-- [9:AT+FET=2\r]
Apr 12 10:18:28.97: [17668]: --> [14:+FHT:FF 13 2F ]
Apr 12 10:18:30.73: [17668]: --> [14:+FHR:FF 13 8C ]
Apr 12 10:18:30.73: [17668]: --> [7:+FPTS:1]
Apr 12 10:18:31.67: [17668]: --> [14:+FHT:FF 13 FB ]
Apr 12 10:18:32.15: [17668]: --> [7:+FHNG:0]
Apr 12 10:18:32.15: [17668]: REMOTE HANGUP: Normal and proper end of
connection
>
> Matthias Reich wrote:
> >-----BEGIN PGP SIGNED MESSAGE-----
> >Hash: SHA1
> >
> >Hi Liste,
> >
> >I want my Multitech MT1432BG to use 2D-MR with another faxmachine.
> >the remote machine has this capability too.
> >
> >[...]
> >Apr 12 12:27:46.32: [29785]: --> [21:+FDIS:1,5,0,2,1,2,1,3]
> >Apr 12 12:27:46.43: [29785]: --> [2:OK]
> >Apr 12 12:27:46.43: [29785]: REMOTE best rate 14400 bit/s
> >Apr 12 12:27:46.43: [29785]: REMOTE max page width 1728 pixels in 215 mm
> >Apr 12 12:27:46.43: [29785]: REMOTE max unlimited page length
> >Apr 12 12:27:46.43: [29785]: REMOTE best vres 7.7 line/mm
> >Apr 12 12:27:46.43: [29785]: REMOTE best format 2-D MR
> >Apr 12 12:27:46.43: [29785]: REMOTE supports T.30 Annex C, half duplex ECM
> >Apr 12 12:27:46.43: [29785]: REMOTE best 10 ms/scanline
> >[...]
> >Remote wants 2-D MR
> >
> >my Multitech tells me:
> >+FDCC=(0-1),(0-5),(0-4),(0-2),(0-2),(0),(0),(0-7)
> >but when sending hylafax uses 1-D MR
> >and sends:
> >Apr 12 12:27:46.43: [29785]: USE 1-D MR
> >Apr 12 12:27:46.43: [29785]: <-- [24:AT+FDIS=0,3,0,2,0,0,0,3\r]
> >
> >to the modem.
> >
> >How can I convince hylafax to send
> >AT+FDIS=0,3,0,2,1,0,0,3 or
> >AT+FDIS=0,3,0,2,2,0,0,3
> >to the modem ??
> >
> >TIA
> >
> >
> >- --
> >HAGOS eG                 phone: +49 711 7880592
> >Matthias Reich             fax: +49 711 7880535
> >Industriestr. 62           web: http://www.hagos.de
> >D-70565 Stuttgart         mail: rei@xxxxxxxx
> >Germany
> >-----BEGIN PGP SIGNATURE-----
> >Version: GnuPG v1.4.0 (GNU/Linux)
> >
> >iD8DBQFCY8CGcjMVLPQ5oUkRAid/AJwNfo74dVzP7lmCjCr7tx76hr6htACdGDsU
> >qhxQdc7hZRNDRyAWreiT0Yk=
> >=l0j7
> >-----END PGP SIGNATURE-----

- -- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880535
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@xxxxxxxx
Germany
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)

iD8DBQFCZJoOcjMVLPQ5oUkRAu5HAJ9OdSYfKLvPp/X5+CSzsMdG+GvlkwCeOgXf
onx6dnc7oOtqMtEr5JJpje4=
=Dohn
-----END PGP SIGNATURE-----

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*