HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] can send but cant receive



Wow, another Davicom modem. I had a 33.6 Davicom modem once (maybe I still do in my drawer full of ISA modems), but it only did Class 2. I'm sure that the chipset was different.

Is the chipset on the modem also Davicom?

When you run faxaddmodem it's not going to pick up a prototype so you're going to need to make your own.

Anyway, as far as the blacklisting, you'll need to read the modem manual about how to manipulate that.

Lee.


-CDRW- wrote:


Ok, Giulioo now I paste the probemodem reply:

Probing for best speed to talk to modem: 38400 OK.

This looks like a Class 1 modem.

ATI0    RESULT = "OK"   RESPONSE = "560"
ATI1    RESULT = "OK"   RESPONSE = "V3.00"
ATI2    RESULT = "OK"   RESPONSE = "TEST OK"
ATI3    RESULT = "OK"   RESPONSE = "DAVICOM V.90
DATA/FAX/VOICE/SPEAKERPHONE MOD EM,Ver:1.02H"
ATI4    RESULT = "OK"   RESPONSE = "DAVICOM
V.90/V.34+/FAX/VOICE/SPEAKERPHONE MO DEM, Date: 2000-07-11A"
ATI5    RESULT = "OK"   RESPONSE = "OK"
ATI6    RESULT = "OK"   RESPONSE = "OK"
ATI7    RESULT = "OK"   RESPONSE = "CTR-21 VERSION"
ATI8    RESULT = "OK"   RESPONSE = "OK"
ATI9    RESULT = "OK"   RESPONSE = "OK"

Class 1 stuff...

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,8"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAE=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAE? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTH=?        RESULT = "OK"   RESPONSE = "3"
AT+FRH=?        RESULT = "OK"   RESPONSE = "3"
AT+FTM=?        RESULT = "OK"   RESPONSE =
"24,48,72,73,74,96,97,98,121,122,145, 146"
AT+FRM=?        RESULT = "OK"   RESPONSE =
"24,48,72,73,74,96,97,98,121,122,145, 146"
AT+FTS=?        RESULT = "OK"   RESPONSE = "3"
AT+FRS=?        RESULT = "ERROR"        RESPONSE = "ERROR"

its ok? thx very much

2005/4/14, Giulio Orsero <giulioo@xxxxxxxxx>:


On 4/14/05, -CDRW- <cdrw.fedora@xxxxxxxxx> wrote:


Hi, i hope us can help me...
Apr 14 11:57:54.28: [ 5403]: <-- [8:ATDT202\r]
Apr 14 11:57:54.59: [ 5403]: --> [11:BLACKLISTED]
Apr 14 11:57:54.59: [ 5403]: SEND FAILED: JOB 40 DEST 202 ERR


Have you tried googling for "modem blacklisted"?

"blacklist" is when you call too much a number which is not answering
and then the modem refuses to call it again until a certain amount of
time is elapsed.
The modem is required to do it by some state regulations/laws.
Just switch it off and then on.
You can disable this modem "feature", but since every chipset has
different ways to do it, you should post output of
probemodem ttyS0
so we undertand what kind of modem you have.
"bestbuy modem" is not enough.

--
giulioo@xxxxxxxxx

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*





____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*





____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions