Re: [hylafax-users] Intermittent problem with a Multitech MT5634Z PX-PCI

[Hugo Kobayashi <hkkobayashi@xxxxxxxxx>]

I have not tried that. Should it appear in the hylafax logs? 

Below is part of the log after the device received its last fax before
stopping working. Before killing the process I tried to dial and got
no response:

Apr  4 15:35:57 sfd FaxGetty[719]: <-- [10:AT+FSPL=?\r]
Apr  4 15:35:57 sfd FaxGetty[719]: --> [3:0,1]
Apr  4 15:35:57 sfd FaxGetty[719]: --> [2:OK]
Apr  4 15:35:57 sfd FaxGetty[719]: <-- [9:AT+FLO=2\r]
Apr  4 15:35:57 sfd FaxGetty[719]: --> [2:OK]
Apr  4 15:35:57 sfd FaxGetty[719]: <-- [10:AT+FTBC=0\r]
Apr  4 15:35:57 sfd FaxGetty[719]: --> [2:OK]
Apr  4 15:35:57 sfd FaxGetty[719]: <-- [10:AT+FBOR=0\r]
Apr  4 15:35:57 sfd FaxGetty[719]: --> [2:OK]
Apr  4 15:35:57 sfd FaxGetty[719]: <-- [13:AT+FPHCTO=30\r]
Apr  4 15:35:57 sfd FaxGetty[719]: --> [2:OK]
Apr  4 15:35:57 sfd FaxGetty[719]: <-- [9:AT+FCQ=1\r]
Apr  4 15:35:58 sfd FaxGetty[719]: --> [2:OK]
Apr  4 15:35:58 sfd FaxGetty[719]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr  4 15:35:58 sfd FaxGetty[719]: --> [2:OK]
Apr  4 15:35:58 sfd FaxGetty[719]: MODEM MULTI-TECH SYSTEMS
MT5634ZPX-PCI/I030100V
Apr  4 15:35:58 sfd FaxGetty[719]: <-- [5:ATM0\r]
Apr  4 15:35:58 sfd FaxGetty[719]: --> [2:OK]
Apr  4 15:35:58 sfd FaxGetty[719]: <-- [23:AT+FLID="NothingSetup"\r]
Apr  4 15:35:58 sfd FaxGetty[719]: --> [2:OK]
Apr  4 15:35:58 sfd FaxGetty[719]: <-- [9:AT+FCR=1\r]
Apr  4 15:35:58 sfd FaxGetty[719]: --> [2:OK]
Apr  4 15:35:58 sfd FaxGetty[719]: STATE CHANGE: RECEIVING -> RUNNING
(timeout 30)
Apr  4 15:35:58 sfd FaxGetty[719]: MODEM input buffering disabled
Apr  5 14:03:27 sfd FaxGetty[719]: CAUGHT SIGNAL 15
Apr  5 14:03:27 sfd FaxGetty[719]: CLOSE /dev/cuaa0
Apr  5 14:03:27 sfd FaxGetty[719]: <-- [5:ATH0\r]
Apr  5 14:03:27 sfd FaxGetty[719]: --> [2:OK]
Apr  5 14:03:27 sfd FaxGetty[719]: MODEM set DTR OFF
Apr  5 14:03:27 sfd FaxGetty[22321]: OPEN /dev/cuaa0  HylaFAX (tm) Version 4.2.1
Apr  5 14:03:28 sfd FaxGetty[22321]: MODEM set DTR OFF
Apr  5 14:03:28 sfd FaxGetty[22321]: DELAY 75 ms
Apr  5 14:03:29 sfd FaxGetty[22321]: MODEM set DTR ON
Apr  5 14:03:29 sfd FaxGetty[22321]: DELAY 2600 ms
Apr  5 14:03:32 sfd FaxGetty[22321]: MODEM set baud rate: 19200 baud,
input flow RTS/CTS, output flow RTS/CTS
Apr  5 14:03:32 sfd FaxGetty[22321]: DELAY 10 ms
Apr  5 14:03:32 sfd FaxGetty[22321]: MODEM flush i/o
Apr  5 14:03:32 sfd FaxGetty[22321]: <-- [4:ATZ\r]
Apr  5 14:03:32 sfd FaxGetty[22321]: --> [3:ATZ]
Apr  5 14:03:32 sfd FaxGetty[22321]: --> [2:OK]

I'm currently testing another software just to be sure it's not a
problem with the card.


On Apr 7, 2005 1:19 PM, Steve Tuckner <STUCKNER@xxxxxxxxxxxxx> wrote:
> When it happens that the modem stops receiving rings, does it still not work
> if you then run Minicom and dial in and see if the RING is displayed?
> 
> Steve Tuckner
> Multi-Tech Systems
> 
> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Hugo Kobayashi
> Sent: Thursday, April 07, 2005 11:04 AM
> To: hylafax-users@xxxxxxxxxxx
> Subject: Re: [hylafax-users] Intermittent problem with a Multitech
> MT5634Z PX-PCI
> 
> Hi Donald,
> 
> Thanks for your response.
> 
> On Apr 6, 2005 12:18 PM, Donald, Adam <adam.donald@xxxxxxxxxxx> wrote:
> >
> > I have the same problem, except mine appears to only happen sometime over
> > the weekend (once a week).
> >
> > I believe that it may be hylafax, because when this is occurring, I can go
> > into minicom and see 'ring' appear when I call the fax number (yet hylafax
> > never picks up).
> >
> > I have been using the following script to "bounce" my 2 ZPX modems every
> > hour (only when they have the status of idle) with cron.
> 
> This is one of the things I'd like to avoid as it's just a workaround
> and not a real solution. I'll do it only if there is nothing else I
> can do, including changing the software.
> 
> Hugo
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> 
>

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*