HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Can't receive faxes



When, as root, I run 
faxanswer ttyS0
after the first ring of an incoming fax the attempt to get the fax
fails.  The log file ends
 RECV FAX: No answer (T.30 T1 timeout)
What am I doing wrong?

Here are some more excerpts from it:
--------------------------------------------
Apr 06 09:50:04.33: [ 1716]: SESSION BEGIN 000000245 14155501062
Apr 06 09:50:04.33: [ 1716]: HylaFAX (tm) Version 4.2.1
Apr 06 09:50:04.33: [ 1716]: <-- [4:ATA\r]
Apr 06 09:50:04.68: [ 1716]: --> [3:FAX]
Apr 06 09:50:04.68: [ 1716]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Apr 06 09:50:04.68: [ 1716]: MODEM input buffering enabled
Apr 06 09:50:04.68: [ 1716]: RECV FAX: begin
Apr 06 09:50:04.68: [ 1716]: MODEM input buffering disabled
Apr 06 09:50:04.68: [ 1716]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C>
Apr 06 09:50:04.68: [ 1716]: <-- data [32]
Apr 06 09:50:04.68: [ 1716]: <-- data [2]
Apr 06 09:50:04.70: [ 1716]: --> [10:NO CARRIER]
Apr 06 09:50:04.70: [ 1716]: MODEM No carrier
Apr 06 09:50:04.70: [ 1716]: DELAY 1500 ms
Apr 06 09:50:06.20: [ 1716]: <-- [9:AT+FTH=3\r]
Apr 06 09:50:06.34: [ 1716]: --> [5:ERROR]
[ many of the delay sequences]
Apr 06 09:50:40.85: [ 1716]: DELAY 1500 ms
Apr 06 09:50:42.35: [ 1716]: <-- [9:AT+FTH=3\r]
Apr 06 09:50:42.49: [ 1716]: --> [5:ERROR]
Apr 06 09:50:42.49: [ 1716]: RECV FAX: No answer (T.30 T1 timeout)
Apr 06 09:50:42.49: [ 1716]: RECV FAX: end
Apr 06 09:50:42.49: [ 1716]: SESSION END
---------------------------------------------------------

I have a USR3070:U.S. Robotics 56K Voice INT set to use class 1.
Running under Debian GNU/Linux with Athlon chip.

When I first tried this, I did not have mgetty installed; I have added
it since (though not restarted the server).

faxgetty is running via inittab
S2:23:respawn:/usr/sbin/faxgetty ttyS0

in config.ttyS0
RingsBeforeAnswer:	0
GettyArgs:		"-r -b -s %s %l"
I added the -s %s following a help file.  Apparently this runs mgetty,
not getty, because the latter doesn't support those options.

Also following the help file, /etc/mgetty/mgetty.config includes
port ttyS0
   # already accepted data call, do not reset
   toggle-dtr n

Thanks


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions