![]() |
Hello again- I'm back, and I'm still seeing some funky behaviour on my RMII/ Hylafax system. On Lee's advice (thank you very much again), I upgraded to Hylafax Snapshot 2005-03-17 in the hopes that my errors would go away. Unfortunately, I'm still seeing somewhat regular occurrences of the error below (this is the same error I've been seeing since I "upgraded" my faxboard from a Comtrol RMIII to an RMII):
Mar 30 10:34:31.00: [12531]: Bad HDLC terminating flag received. Mar 30 10:34:31.00: [12531]: HDLC frame with bad address field 0xd6 Mar 30 10:34:31.07: [12531]: HDLC frame not byte-oriented. Trailing byte: 0xc0 Mar 30 10:34:31.15: [12531]: Bad HDLC terminating flag received. Mar 30 10:34:31.15: [12531]: Bad HDLC terminating flag received. Mar 30 10:34:31.23: [12531]: HDLC frame not byte-oriented. Trailing byte: 0xfc Mar 30 10:34:31.30: [12531]: Bad HDLC terminating flag received. <trimmed a bunch more bad frame lines> Mar 30 10:34:33.85: [12531]: RECV assumed RCP frame with block end Mar 30 10:34:33.85: [12531]: --> [10:NO CARRIER] Mar 30 10:34:33.85: [12531]: <-- [9:AT+FRH=3\r] Mar 30 10:34:37.11: [12531]: --> [7:CONNECT] Mar 30 10:34:38.56: [12531]: --> [2:OK] Mar 30 10:34:38.56: [12531]: RECV recv TSI (sender id) Mar 30 10:34:38.56: [12531]: <-- [9:AT+FRS=7\r] Mar 30 10:34:39.10: [12531]: --> [2:OK] Mar 30 10:34:39.10: [12531]: RECV FAX (000000107): from 2072558889, page 1 in 0:13, INF, 3.85 line/mm, 2-D MMR, 14400 bit/s Mar 30 10:34:39.10: [12531]: RECV FAX (000000107): recvq/fax000000107.tif from 2072558889, route to <unspecified>, 1 pages in 0:22 Mar 30 10:34:39.10: [12531]: RECV FAX: COMREC invalid response received (expected PPS) Mar 30 10:34:39.10: [12531]: <-- [9:AT+FTH=3\r] Mar 30 10:34:39.15: [12531]: --> [7:CONNECT] Mar 30 10:34:40.47: [12531]: --> [2:OK] Mar 30 10:34:40.47: [12531]: RECV FAX (000000107): session with 2072558889 terminated abnormally: COMREC invalid response received (expected PPS) Mar 30 10:34:40.47: [12531]: RECV FAX: bin/faxrcvd "recvq/fax000000107.tif" "ttyR5" "000000107" "COMREC invalid response received (expected PPS)" Mar 30 10:34:40.47: [12531]: RECV FAX: end Mar 30 10:34:40.47: [12531]: SESSION END
As always, thanks for any input you may have! Rubin
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*