HylaFAX The world's most advanced open source fax server |
It seems that my hylafax (4.2.1 on Redhat 9) has a problem to send a fax to a few fax receipts. The following is one of them. Send faxing to them by using a fax machine is fine !!! Any ideas ? Thanks, Josh P.S. modem is U.S.Robotics Model: USR5660A configured as class 1.0 -----Original Message----- From: pcsfaxmaster [mailto:fax@xxxxxxxxxxxxxxxxxxx] Sent: Thursday, March 24, 2005 2:36 PM To: POKey_3497@xxxxxxx Subject: facsimile job 187 to 6316500501 failed Your facsimile job to 6316500501 failed because: No response to EOP repeated 3 tries; Giving up after 3 attempts to send same page ---- Transcript of session follows ---- Mar 24 14:34:45.70: [13810]: SESSION BEGIN 000000233 15166316500501 Mar 24 14:34:45.70: [13810]: HylaFAX (tm) Version 4.2.1 Mar 24 14:34:45.70: [13810]: SEND FAX: JOB 187 DEST 6316500501 COMMID 000000233 DEVICE '/dev/ttySHSF1' Mar 24 14:34:45.70: [13810]: <-- [14:AT+FCLASS=1.0\r] Mar 24 14:34:45.84: [13810]: --> [2:OK] Mar 24 14:34:45.84: [13810]: DIAL 916316500501 Mar 24 14:34:45.84: [13810]: <-- [17:ATDT916316500501\r] Mar 24 14:35:06.57: [13810]: --> [7:CONNECT] Mar 24 14:35:08.63: [13810]: --> [2:OK] Mar 24 14:35:08.63: [13810]: REMOTE NSF "00 00 11 80 FF 8A 49 10 43 41 53 54 45 52 53 20 41 4E 44 20 57 48 45 45 00 BA 00 80 80 80 06 14 01 01 43 41 53 54 45 52 53 20 41 4E 44 20 57 48 45 45 4C 53 01 03" Mar 24 14:35:08.63: [13810]: NSF remote fax equipment: Canon Mar 24 14:35:08.63: [13810]: NSF remote station ID: "CASTERS AND WHEELS" Mar 24 14:35:08.63: [13810]: <-- [9:AT+FRH=3\r] Mar 24 14:35:08.67: [13810]: --> [7:CONNECT] Mar 24 14:35:09.33: [13810]: --> [2:OK] Mar 24 14:35:09.33: [13810]: REMOTE CSI "631 650 0501" Mar 24 14:35:09.33: [13810]: <-- [9:AT+FRH=3\r] Mar 24 14:35:09.37: [13810]: --> [7:CONNECT] Mar 24 14:35:09.67: [13810]: --> [2:OK] Mar 24 14:35:09.67: [13810]: REMOTE best rate 14400 bit/s Mar 24 14:35:09.67: [13810]: REMOTE max A4 page width (215 mm) Mar 24 14:35:09.67: [13810]: REMOTE max unlimited page length Mar 24 14:35:09.67: [13810]: REMOTE best vres R16 x 15.4 line/mm Mar 24 14:35:09.67: [13810]: REMOTE best format 2-D MR Mar 24 14:35:09.67: [13810]: REMOTE best 0 ms/scanline Mar 24 14:35:09.67: [13810]: USE 14400 bit/s Mar 24 14:35:09.67: [13810]: USE 0 ms/scanline Mar 24 14:35:09.67: [13810]: SEND file "docq/doc188.ps;01" Mar 24 14:35:09.67: [13810]: USE A4 page width (215 mm) Mar 24 14:35:09.67: [13810]: USE unlimited page length Mar 24 14:35:09.67: [13810]: USE 7.7 line/mm Mar 24 14:35:09.67: [13810]: USE 2-D MR Mar 24 14:35:09.67: [13810]: SEND training at v.17 14400 bit/s Mar 24 14:35:09.67: [13810]: <-- [9:AT+FTH=3\r] Mar 24 14:35:10.00: [13810]: --> [7:CONNECT] Mar 24 14:35:11.58: [13810]: --> [7:CONNECT] Mar 24 14:35:12.04: [13810]: --> [2:OK] Mar 24 14:35:12.04: [13810]: <-- [9:AT+FTS=7\r] Mar 24 14:35:12.20: [13810]: --> [2:OK] Mar 24 14:35:12.20: [13810]: <-- [11:AT+FTM=145\r] Mar 24 14:35:12.24: [13810]: --> [7:CONNECT] Mar 24 14:35:15.43: [13810]: --> [2:OK] Mar 24 14:35:15.43: [13810]: <-- [9:AT+FRH=3\r] Mar 24 14:35:15.58: [13810]: --> [7:CONNECT] Mar 24 14:35:16.84: [13810]: --> [2:OK] Mar 24 14:35:16.84: [13810]: TRAINING succeeded Mar 24 14:35:16.84: [13810]: DELAY 200 ms Mar 24 14:35:17.04: [13810]: <-- [11:AT+FTM=146\r] Mar 24 14:35:17.36: [13810]: --> [7:CONNECT] Mar 24 14:35:17.36: [13810]: SEND begin page Mar 24 14:35:17.36: [13810]: Reading MH-compressed image file Mar 24 14:35:22.54: [13810]: SENT 14138 bytes of data Mar 24 14:35:22.54: [13810]: SEND 2D RTC Mar 24 14:35:22.54: [13810]: SEND end page Mar 24 14:35:25.66: [13810]: --> [2:OK] Mar 24 14:35:25.66: [13810]: <-- [9:AT+FTS=9\r] Mar 24 14:35:25.84: [13810]: --> [2:OK] Mar 24 14:35:25.84: [13810]: SEND send EOP (no more pages or documents) Mar 24 14:35:25.84: [13810]: <-- [9:AT+FTH=3\r] Mar 24 14:35:25.88: [13810]: --> [7:CONNECT] Mar 24 14:35:27.15: [13810]: --> [2:OK] Mar 24 14:35:27.15: [13810]: <-- [9:AT+FRH=3\r] Mar 24 14:35:30.25: [13810]: --> [0:] Mar 24 14:35:30.25: [13810]: MODEM <Empty line> Mar 24 14:35:30.45: [13810]: MODEM <Timeout> Mar 24 14:35:30.45: [13810]: SEND send EOP (no more pages or documents) Mar 24 14:35:30.45: [13810]: <-- [9:AT+FTH=3\r] Mar 24 14:35:30.77: [13810]: --> [7:CONNECT] Mar 24 14:35:32.07: [13810]: --> [2:OK] Mar 24 14:35:32.07: [13810]: <-- [9:AT+FRH=3\r] Mar 24 14:35:35.17: [13810]: --> [0:] Mar 24 14:35:35.17: [13810]: MODEM <Empty line> Mar 24 14:35:35.37: [13810]: MODEM <Timeout> Mar 24 14:35:35.37: [13810]: SEND send EOP (no more pages or documents) Mar 24 14:35:35.37: [13810]: <-- [9:AT+FTH=3\r] Mar 24 14:35:35.69: [13810]: --> [7:CONNECT] Mar 24 14:35:36.99: [13810]: --> [2:OK] Mar 24 14:35:36.99: [13810]: <-- [9:AT+FRH=3\r] Mar 24 14:35:40.09: [13810]: --> [0:] Mar 24 14:35:40.09: [13810]: MODEM <Empty line> Mar 24 14:35:40.29: [13810]: MODEM <Timeout> Mar 24 14:35:40.29: [13810]: No response to EOP repeated 3 tries Mar 24 14:35:40.29: [13810]: SEND: No response to EOP repeated 3 tries; Giving up after 3 attempts to send same page "docq/doc188.ps;01", dirnum 0 Mar 24 14:35:40.29: [13810]: <-- [9:AT+FTH=3\r] Mar 24 14:35:40.61: [13810]: --> [7:CONNECT] Mar 24 14:35:41.90: [13810]: --> [2:OK] Mar 24 14:35:41.90: [13810]: <-- [5:ATH0\r] Mar 24 14:35:42.04: [13810]: --> [2:OK] Mar 24 14:35:42.04: [13810]: SESSION END ---- Unsent job status ---- Destination: 6316500501 JobID: 187 GroupID: 187 Sender: POKey_3497 Mailaddr: POKey_3497@xxxxxxx CommID: 000000233 Submitted From: pcsfax Page Width: 209 (mm) Page Length: 296 (mm) Resolution: 196 (lpi) Status: No response to EOP repeated 3 tries; Giving up after 3 attempts to send same page Dialogs: 3 (exchanges with remote device) Dials: 0 (consecutive failed calls to destination) Calls: 3 (total phone calls placed) Pages: 0 (pages transmitted) TotPages: 1 (total pages to transmit) Attempts: 3 (attempts to send current page) Dirnum: 0 (directory of next page to send) ---- Documents submitted for transmission ---- The following documents were submitted for transmission and are available on the server for reuse until they are automatically purged when this job is removed. Documents may also be manually removed using the faxrm command; consult faxrm(1) for information. Filename Size Type docq/doc188.ps 18092 PostScript ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*