Re: [hylafax-users] No carrier detected

["Joe Hansen" <joehansen12@xxxxxxxxxxx>]

Thanks for responding, Lee and Giulio.

My config.ttyS1 file did not have "ModemDialCmd" and "ModemWaitTimeCmd" 
commands. So, I have added these two lines and restarted hylafax. Still no 
success! Sigh! :(

This makes me believe that the problem might not be with the number of 
rings. Am I barking at the wrong tree here?

I have a MultiTech MT5634ZBA-V.92 Serial Fax Modem, which is awesome :). It 
has v.34 fax capability. I have configured it as Class 1.0. It faxes at 
almost 4.4 pages on average to fax machines which are 33.6Kbps.

Destination fax machine is a "Brother Intellifax 4100" machine connected to 
a dedicated fax line.

Thanks
Joe.

I am pasting my config.ttyS1 file.

# $Id: lucent-mt-10,v 1.4 2004/06/01 21:34:39 lhoward Exp $

#
# prototype config for MultiTech 5634-series modems using
# the Lucent/Agere chipset supporting V.34-Fax.
#

#
CountryCode:		1
AreaCode:		801
FAXNumber:		+1.801.443.0030
LongDistancePrefix:	1
InternationalPrefix:	011
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0600
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	0
SpeakerVolume:		off
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"From: Joe Hansen"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		" %%l|%c|Page %%P of %%T"
MaxRecvPages:		25
#

ModemType:		Class1.0	# use this to supply a hint
ModemRate:		57600		# must be at least as fast as the DCE-DCE communication
ModemFlowControl:	rtscts		# many firmwares have broken software flow control
Class1EnableV34Cmd:	AT+F34=14,1,2	# 33600-2400 primary, 2400-1200 control
Class1TCFRecvHack:	yes		# avoid +FCERROR before TCF
Class1TMConnectDelay:	400		# counteract quick CONNECT response

# If your line supports Caller-ID, you may want to uncomment this...
# QualifyCID:		etc/cid		# you must create this file
# ModemResetCmds:	AT+VCID=1
# CIDNumber:		"NMBR="
# CIDName:		"NAME="

# Or with the MT5634ZBA-DID you'll probably need something like...
# ModemReadyCmds:	AT*DS1*DD0*DF1*DN4	# enable DTMF-DID, wink-start, 4 digits
# CIDNumber:		"DTMF"		# format of AT*DF1
# CIDNumberAnswerLength:	4	# four DTMF-DID digits then ATA
# Added the following commands manually...
ModemDialCmd:		ATDT%s,,,
ModemWaitTimeCmd:    	ATS7=90

_________________________________________________________________
Is your PC infected? Get a FREE online computer virus scan from McAfee® 
Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*