![]() |
Hello again,
I have gone round and round with this problem and it comes back to the ModemResetCmds:
If this flag is ion the config.tty??? then I get nothing. Is there a way to put faxgetty into super dump mode to take a look at what would could be going on?
I have attached my config just for fun! I have tried the config with quotes around AT#CID=5 and without quotes same result.
THanks
Lach
# $Id: eicon-2,v 1.2 2004/03/05 02:29:32 lhoward Exp $ # # prototype config file for the Eicon Diva ISDN Modem #
# # CountryCode: 1 AreaCode: 651 FAXNumber: +1.999.555.1212 LongDistancePrefix: 1 InternationalPrefix: 011 DialStringRules: etc/dialrules ServerTracing: 1 SessionTracing: 11 RecvFileMode: 0600 LogFileMode: 0600 DeviceMode: 0600 RingsBeforeAnswer: 1 SpeakerVolume: off GettyArgs: "-h %l dx_%s" LocalIdentifier: "NothingSetup" TagLineFont: etc/lutRS18.pcf TagLineFormat: "From %%l|%c|Page %%P of %%T" MaxRecvPages: 50 # #
ModemType: Class2 ModemRate: 19200 # on boards supporting V.34-fax, # this may need to be 57600 ModemFlowControl: rtscts ModemNoFlowCmd: AT&K0 ModemSoftFlowCmd: AT&K4 ModemHardFlowCmd: AT&K3
ModemResetCmds: "AT#CID=5"
Class2APQueryCmd: none Class2SPLCmd: none Class2TBCCmd: none Class2ECMType: 2.0 # follows Class 2.0 spec, not Class 2 Class2CQQueryCmd: !3 Class2CQCmd: AT CIDNumber: "DAD: "
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*