HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
Re: [hylafax-users] DID diva server, Hylafax 4.21
I have attached my config.ttyds01 file.
The problem seems to be with the
ModemResetCmds: AT#CID=5
In my prior install this setting would pass back the CID NUMBER: and
DAD:
Now with the modem reset command in place all I get is a busy signal.
When I comment out the ModemResetCmds: the faxes are received, just
not routed by DID.
THanks
Lach
# $Id: eicon-2,v 1.2 2004/03/05 02:29:32 lhoward Exp $
#
# prototype config file for the Eicon Diva ISDN Modem
#
#
#
CountryCode: 1
AreaCode: 651
FAXNumber: +1.999.555.1212
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "NothingSetup"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#
#
ModemType: Class2
ModemRate: 57600 # on boards supporting V.34-fax,
# this may need to be 57600
ModemFlowControl: rtscts
ModemNoFlowCmd: AT&K0
ModemSoftFlowCmd: AT&K4
ModemHardFlowCmd: AT&K3
Class2APQueryCmd: none
Class2SPLCmd: none
Class2TBCCmd: none
Class2ECMType: 2.0 # follows Class 2.0 spec, not Class 2
#ModemResetCmds: AT#CID=5
CIDNumber: "DAD: "
On Mar 14, 2005, at 9:32 PM, Lach Dunlop wrote:
Hello,
I had a configuration working just wonderfully.... Unitl today.
It was a diva Server 6.0 on Suse Linux 8.1 and Hylafax 4.1.5
Today it died and all I got was abusy tone. I took the opportunity to
upgrade to Suse 8.2 and Diva 7.5 and Hylafax 4.2.1.
I am receiving faxes but I am getting no DID info :(( So all my fax
routing is broken.
When I do a faxaddmodem it senses the modems (/dev/ttyds0?) as CLASS1
modems. In my old config they where CLASS 2.
Is there something I am missing? I really need my DID back.
Thanks
Lachh
____________________ HylaFAX(tm) Users Mailing List
_______________________
To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*