Re: [hylafax-users] faxgetty doesn't answer

To: <hylafax-users@xxxxxxxxxxx>
Subject: Re: [hylafax-users] faxgetty doesn't answer
From: "Hector S. Mendoza Ortiz" <hector@xxxxxxxxxxxxxxxxxxx>
Date: Wed, 2 Mar 2005 10:43:38 -0600

Here is the output of probemodem, don't know if it helps, but here it is

Héctor

Now we are going to probe the tty port.  This takes a few seconds,
so be patient.  Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).

Probing for best speed to talk to modem: 38400 OK.

This looks like a Class 1 and 2 modem.

ATI0    RESULT = "OK"   RESPONSE = "AEIGFM560LKNF1"
ATI1    RESULT = "OK"   RESPONSE = "2665"
ATI2    RESULT = "OK"   RESPONSE = "OK"
ATI3    RESULT = "OK"   RESPONSE = "AEIGFM560LKNF1"
ATI4    RESULT = "OK"   RESPONSE = "17"
ATI5    RESULT = "OK"   RESPONSE = "p052099f,0,19"
ATI6    RESULT = "OK"   RESPONSE = "No Cell Phone Selected"
ATI7    RESULT = "OK"   RESPONSE = "OK"
ATI8    RESULT = "OK"   RESPONSE = "OK"
ATI9    RESULT = "OK"   RESPONSE = "North America"

Class 1 stuff...

AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2" AT+FCLASS? RESULT = "OK" RESPONSE = "0" AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK" AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK" AT+FCLASS? RESULT = "OK" RESPONSE = "1" AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAA=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAA? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAE=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAE? RESULT = "ERROR" RESPONSE = "ERROR" AT+FTH=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146" AT+FRH=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146" AT+FTM=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146" AT+FRM=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146" AT+FTS=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FRS=? RESULT = "ERROR" RESPONSE = "ERROR"

Class 2 stuff...

AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2" AT+FCLASS? RESULT = "OK" RESPONSE = "1" AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK" AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK" AT+FCLASS=2 RESULT = "OK" RESPONSE = "OK" AT+FCLASS? RESULT = "OK" RESPONSE = "2" AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAA=? RESULT = "OK" RESPONSE = "0,1" AT+FAA? RESULT = "OK" RESPONSE = "0" AT+FAXERR=? RESULT = "OK" RESPONSE = "OK" AT+FAXERR? RESULT = "OK" RESPONSE = "0" AT+FBADLIN=? RESULT = "OK" RESPONSE = "0-255" AT+FBADLIN? RESULT = "OK" RESPONSE = "5" AT+FBADMUL=? RESULT = "OK" RESPONSE = "0-255" AT+FBADMUL? RESULT = "OK" RESPONSE = "20" AT+FBOR=? RESULT = "OK" RESPONSE = "0-3" AT+FBOR? RESULT = "OK" RESPONSE = "0" AT+FBUF=? RESULT = "OK" RESPONSE = "OK" AT+FBUF? RESULT = "OK" RESPONSE = "2448,2252,2124,1" AT+FBUG=? RESULT = "OK" RESPONSE = "0" AT+FBUG? RESULT = "OK" RESPONSE = "0" AT+FCIG=? RESULT = "OK" RESPONSE = "(32-127)" AT+FCIG? RESULT = "OK" RESPONSE = "" "" AT+FCQ=? RESULT = "OK" RESPONSE = "0-1" AT+FCQ? RESULT = "OK" RESPONSE = "0" AT+FCR=? RESULT = "OK" RESPONSE = "0,1" AT+FCR? RESULT = "OK" RESPONSE = "1" AT+FTBC=? RESULT = "OK" RESPONSE = "0" AT+FTBC? RESULT = "OK" RESPONSE = "0" AT+FDCC=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0),(0-2),(0),(0),(0),(0-7)" AT+FDCC? RESULT = "OK" RESPONSE = "1,5,0,2,0,0,0,0" AT+FDCS=? RESULT = "OK" RESPONSE = "OK" AT+FDCS? RESULT = "OK" RESPONSE = "0,0,0,0,0,0,0,0" AT+FDIS=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0),(0-2),(0),(0),(0),(0-7)" AT+FDIS? RESULT = "OK" RESPONSE = "1,5,0,2,0,0,0,0" AT+FDT=? RESULT = "OK" RESPONSE = "OK" AT+FDT? RESULT = "ERROR" RESPONSE = "ERROR" AT+FECM=? RESULT = "OK" RESPONSE = "0" AT+FECM? RESULT = "OK" RESPONSE = "0" AT+FET=? RESULT = "OK" RESPONSE = "0-2" AT+FET? RESULT = "OK" RESPONSE = "0" AT+FLID=? RESULT = "OK" RESPONSE = "(32-127)" AT+FLID? RESULT = "OK" RESPONSE = "" "" AT+FLNFC=? RESULT = "OK" RESPONSE = "0" AT+FLNFC? RESULT = "OK" RESPONSE = "0" AT+FLPL=? RESULT = "OK" RESPONSE = "0,1" AT+FLPL? RESULT = "OK" RESPONSE = "0" AT+FMDL? RESULT = "OK" RESPONSE = "AEIGFM560LKNF1" AT+FMFR? RESULT = "OK" RESPONSE = "AEIGFM560LKNF1" AT+FMINSP=? RESULT = "OK" RESPONSE = "0-3" AT+FMINSP? RESULT = "OK" RESPONSE = "0" AT+FPHCTO=? RESULT = "OK" RESPONSE = "0-255" AT+FPHCTO? RESULT = "OK" RESPONSE = "30" AT+FPTS=? RESULT = "OK" RESPONSE = "1-3" AT+FPTS? RESULT = "OK" RESPONSE = "1" AT+FRBC=? RESULT = "OK" RESPONSE = "0" AT+FRBC? RESULT = "OK" RESPONSE = "0" AT+FREL=? RESULT = "OK" RESPONSE = "0" AT+FREL? RESULT = "OK" RESPONSE = "0" AT+FREV? RESULT = "OK" RESPONSE = "p052099f" AT+FSPL=? RESULT = "OK" RESPONSE = "0,1" AT+FSPL? RESULT = "OK" RESPONSE = "0" AT+FTBC=? RESULT = "OK" RESPONSE = "0" AT+FTBC? RESULT = "OK" RESPONSE = "0" AT+FVRFC=? RESULT = "OK" RESPONSE = "0" AT+FVRFC? RESULT = "OK" RESPONSE = "0" AT+FWDFC=? RESULT = "OK" RESPONSE = "0" AT+FWDFC? RESULT = "OK" RESPONSE = "0" AT+FK=? RESULT = "OK" RESPONSE = "OK"

----- Original Message ----- From: "Hector S. Mendoza Ortiz" <hector@xxxxxxxxxxxxxxxxxxx> To: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx> Cc: <hylafax-users@xxxxxxxxxxx> Sent: Wednesday, March 02, 2005 10:25 AM Subject: Re: [hylafax-users] faxgetty doesn't answer

Yes, it works ok.. but I need to remove faxgetty from inittab and restart
machine to be able to access it, because it will not let go of the device
even with a init q (after removal) and kill -9 <pid>
Héctor ----- Original Message ----- From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx> To: "Hector S. Mendoza Ortiz" <hector@xxxxxxxxxxxxxxxxxxx> Cc: <hylafax-users@xxxxxxxxxxx> Sent: Tuesday, March 01, 2005 7:08 PM Subject: Re: [hylafax-users] faxgetty doesn't answer
Hector S. Mendoza Ortiz wrote:
Hello all!

I have a problem, I'm experimenting with deploying a hylafax installation but I've runned into a problem.

I installed version 4.2.1-1fc3 (RPM from hylafax.org) on a fresh installed machine with FC3 with a PCMCIA modem ActionTec Datalink V90 LK (http://www.actiontec.com/support/modems/dlv90lk.php) modem gets detected by linux perfectly with no problems at boot time and creates device (ttyS3), it's already configured on inittab to launch (mo:2345:respawn:/usr/sbin/faxgetty ttyS3), hylafax starts as expected:

Mar 1 17:53:01 fax hylafax: faxq startup succeeded Mar 1 17:53:01 fax FaxQueuer[2392]: HylaFAX (tm) Version 4.2.1 Mar 1 17:53:01 fax FaxQueuer[2392]: Copyright (c) 1990-1996 Sam Leffler Mar 1 17:53:01 fax FaxQueuer[2392]: Copyright (c) 1991-1996 Silicon Graphics, Inc. Mar 1 17:53:01 fax HylaFAX[2396]: HylaFAX INET Protocol Server: restarted. Mar 1 17:53:01 fax hylafax: hfaxd startup succeeded Mar 1 17:53:05 fax FaxGetty[2442]: OPEN /dev/ttyS3 HylaFAX (tm) Version 4.2.1 Mar 1 17:53:15 fax FaxGetty[2442]: MODEM AEIGFM560LKNF1 AEIGFM560LKNF1/p052099f

faxstat reports the modem as ready
[root@fax ~]# faxstat
HylaFAX scheduler on fax.intranet.acorporativa.com.mx: Running
Modem ttyS3 ((55)5393-8720): Running and idle
[root@fax ~]#
but faxgetty never answers incomming calls, i've straced faxgetty's process and got this:

select(9, [5 8], [], [8], {29, 999096}) = 0 (Timeout) gettimeofday({1109723926, 489798}, NULL) = 0 gettimeofday({1109723926, 490670}, NULL) = 0 gettimeofday({1109723926, 491240}, NULL) = 0 select(9, [5 8], [], [8], {0, 636}) = 0 (Timeout) gettimeofday({1109723926, 494599}, NULL) = 0 gettimeofday({1109723926, 495321}, NULL) = 0 open("/var/lock/LCK..ttyS3", O_RDONLY) = -1 ENOENT (No such file or directory) gettimeofday({1109723926, 496569}, NULL) = 0 gettimeofday({1109723926, 496789}, NULL) = 0

and it keeps looping and looping, if I make a call to the fax, it will still be the same.

When it's on the right mood and after several reboot's it will answer the phone, but if you call it and no fax is sent, it will go to this same mode again. Also if it's running normally and I restart the hylafax service /etc/init.d/hylafax restart it will hang this same way.

I've commed to see that it's a uucp locking problem, but haven't found a way to fix it.

any ideas on what's going on? did I do something wrong?
Can you set

ServerTracing: 0xFFF

in your modem config file, restart faxgetty, and then send the FaxGetty logs in your /var/log/messages after you call the line?

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Prev by Date: Re: [hylafax-users] CAN'T SEND FAXES - ERR No carrier detected
Next by Date: Re: [hylafax-users] Weird empty transmission reports
Previous by thread: Re: [hylafax-users] faxgetty doesn't answer
Next by thread: [hylafax-users] CAN'T SEND FAXES - ERR No carrier detected
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions