[hylafax-users] COMREC error

[hkbyte <myeasytech@xxxxxxxxxxxx>]

We have many COMREC errors recently, here below is our error log and 
config file:

Mar 02 00:00:18.97: [14524]: SESSION BEGIN 00061503 852
Mar 02 00:00:18.97: [14524]: HylaFAX (tm) Version 4.1.7
Mar 02 00:00:18.98: [14524]: <-- [4:ATA\r]
Mar 02 00:00:25.22: [14524]: --> [7:CONNECT]
Mar 02 00:00:25.22: [14524]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
Mar 02 00:00:25.22: [14524]: STATE CHANGE: ANSWERING -> RECEIVING
Mar 02 00:00:25.22: [14524]: MODEM input buffering enabled
Mar 02 00:00:25.22: [14524]: RECV FAX: begin
Mar 02 00:00:25.22: [14524]: MODEM input buffering disabled
Mar 02 00:00:25.22: [14524]: <-- HDLC<23:FF C0 02 CA EA C2 04 04 04 04 
04 04 04
04 04 04 04 04 04 04 04 04 04>
Mar 02 00:00:25.22: [14524]: <-- data [23]
Mar 02 00:00:25.22: [14524]: <-- data [2]
Mar 02 00:00:26.89: [14524]: --> [7:CONNECT]
Mar 02 00:00:26.89: [14524]: <-- HDLC<10:FF C8 01 00 77 5F 01 79 03 C0>
Mar 02 00:00:26.89: [14524]: <-- data [10]
Mar 02 00:00:26.89: [14524]: <-- data [2]
Mar 02 00:00:27.43: [14524]: --> [2:OK]
Mar 02 00:00:27.43: [14524]: <-- [9:AT+FRH=3\r]
Mar 02 00:00:27.84: [14524]: --> [7:CONNECT]
Mar 02 00:00:29.34: [14524]: --> HDLC<25:FF C0 C2 0E AE 2E A6 CA E6 76 
96 16 2E
F6 72 04 04 04 04 04 04 04 04 51 6E>
Mar 02 00:00:29.34: [14524]: --> [2:OK]
Mar 02 00:00:29.34: [14524]: REMOTE TSI "HDA"
Mar 02 00:00:29.34: [14524]: <-- [9:AT+FRH=3\r]
Mar 02 00:00:29.35: [14524]: --> [7:CONNECT]
Mar 02 00:00:29.68: [14524]: --> HDLC<8:FF C8 C1 00 47 1E 36 71>
Mar 02 00:00:29.69: [14524]: --> [2:OK]
Mar 02 00:00:29.69: [14524]: REMOTE wants 14400 bit/s
Mar 02 00:00:29.69: [14524]: REMOTE wants page width 1728 pixels in 215 mm
Mar 02 00:00:29.69: [14524]: REMOTE wants unlimited page length
Mar 02 00:00:29.69: [14524]: REMOTE wants 7.7 line/mm
Mar 02 00:00:29.69: [14524]: REMOTE wants 2-D MR
Mar 02 00:00:29.69: [14524]: RECV training at v.17 14400 bit/s
Mar 02 00:00:29.69: [14524]: <-- [11:AT+FRM=145\r]
Mar 02 00:00:31.46: [14524]: --> [7:CONNECT]
Mar 02 00:00:33.04: [14524]: RECV: TCF 2793 bytes, 0% non-zero, 2762 
zero-run
Mar 02 00:00:33.05: [14524]: --> [10:NO CARRIER]
Mar 02 00:00:33.05: [14524]: DELAY 75 ms
Mar 02 00:00:33.12: [14524]: TRAINING succeeded
Mar 02 00:00:33.12: [14524]: <-- [9:AT+FTH=3\r]
Mar 02 00:00:33.16: [14524]: --> [7:CONNECT]
Mar 02 00:00:33.16: [14524]: <-- HDLC<3:FF C8 21>
Mar 02 00:00:33.16: [14524]: <-- data [3]
Mar 02 00:00:33.16: [14524]: <-- data [2]
Mar 02 00:00:34.48: [14524]: --> [2:OK]
Mar 02 00:00:34.48: [14524]: MODEM input buffering enabled
Mar 02 00:00:34.48: [14524]: <-- [11:AT+FRM=146\r]
Mar 02 00:00:37.63: [14524]: --> [8:+FCERROR]
Mar 02 00:00:37.63: [14524]: MODEM input buffering disabled
Mar 02 00:00:37.63: [14524]: <-- [9:AT+FRH=3\r]
Mar 02 00:00:37.97: [14524]: --> [7:CONNECT]
Mar 02 00:00:38.17: [14524]: --> HDLC<5:FF C8 F4 CC 66>
Mar 02 00:00:38.17: [14524]: --> [2:OK]
Mar 02 00:00:38.17: [14524]: RECV recv EOP (no more pages or documents)
Mar 02 00:00:38.17: [14524]: RECV FAX (00061503): recvq/fax57586.tif 
from HDA, r
oute to <unspecified>, 0 pages in 0:13
Mar 02 00:00:38.17: [14524]: RECV FAX: COMREC invalid response received
Mar 02 00:00:38.17: [14524]: <-- [9:AT+FTH=3\r]
Mar 02 00:00:38.21: [14524]: --> [7:CONNECT]
Mar 02 00:00:38.21: [14524]: <-- HDLC<3:FF C8 5F>
Mar 02 00:00:38.21: [14524]: <-- data [3]
Mar 02 00:00:38.21: [14524]: <-- data [2]
Mar 02 00:00:39.52: [14524]: --> [2:OK]
Mar 02 00:00:39.52: [14524]: MODEM input buffering enabled
Mar 02 00:00:39.52: [14524]: RECV FAX (00061503): session with HDA 
terminated ab
normally: COMREC invalid response received
Mar 02 00:00:39.52: [14524]: RECV FAX: bin/faxrcvd "recvq/fax57586.tif" 
"ttyS1"
"00061503" "COMREC invalid response received" "" ""
Mar 02 00:00:39.79: [14524]: RECV FAX: end
Mar 02 00:00:39.79: [14524]: SESSION END


CountryCode:            852
AreaCode:               1
FAXNumber:              24684685
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          0xFFFFF
SessionTracing:         0xFFFFF
RecvFileMode:           0664
LogFileMode:            0664
DeviceMode:             0664
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        TEST
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use this to supply a hint
ModemRate:              19200   # rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&K0           # setup no flow control
ModemHardFlowCmd:       AT&K3           # setup hardware flow control
ModemSoftFlowCmd:       AT&K4           # setup software flow control
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier 
(or not)
#
ModemMfrQueryCmd:       !Rockwell
ModemModelQueryCmd:     !RC288DPi
ModemRevQueryCmd:       ATI3            # product information
#
ModemDialCmd:           ATDT%s          # T for tone dialing

- hkbyte

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*