[hylafax-users] 4.2.1: batch and info/supportsBatching

[Giulio Orsero <giulioo@xxxxxxxxx>]

Last time we sent a lot of jobs we got 12 batched calls to 10 different
numbers.
2 of these receivers had problems (both of them brother)
8 of them went fine (ricoh, xerow, unknown)

The 2 problematic receivers were the only ones to have 3 jobs for them (the
other batched receivers had 2 each), don't know if this is relevant (I think
it isn't, and cannot easily make test calls to them) and the sequence of
events for both of them was:
1st call:
	1st job, eom, ok, 2nd job, eom, fail
2nd call:
	2nd job, eom, ok, 3rd job, eop, fail
3rd call:
	3rd job eop, ok  

The actual problem is that the info/<faxno> file still reported
supportsBatching:yes for these 2 numbers (is this expected?). I now changed
it to &supportsBatching:no. I read on bugzilla that if a problems occurs in
the batched job then the number will be marked as bad for batching.


Logs:
modem for log #1 #3 #4 is rockwell ACF3_V1.700-V90_P21_FSH
modem for log #2 is rockwell V2010-K56_DLS

= end of 2nd job, 2nd in the batch, 1st receiver
Feb 18 20:03:54.63: [ 2084]: <-- data [7]
Feb 18 20:03:54.63: [ 2084]: <-- data [2]
Feb 18 20:03:56.03: [ 2084]: --> [2:OK]
Feb 18 20:03:56.03: [ 2084]: SEND send PPS (partial page signal)
Feb 18 20:03:56.03: [ 2084]: SEND send EOM (more documents)
Feb 18 20:03:56.03: [ 2084]: <-- [9:AT+FRH=3\r]
Feb 18 20:03:59.13: [ 2084]: --> [0:]
Feb 18 20:03:59.13: [ 2084]: MODEM <Empty line>
Feb 18 20:03:59.13: [ 2084]: <-- data [1]
Feb 18 20:03:59.18: [ 2084]: --> [2:OK]
Feb 18 20:03:59.18: [ 2084]: <-- [9:AT+FTH=3\r]
Feb 18 20:03:59.22: [ 2084]: --> [7:CONNECT]
Feb 18 20:03:59.22: [ 2084]: <-- data [7]
Feb 18 20:03:59.22: [ 2084]: <-- data [2]
Feb 18 20:04:00.62: [ 2084]: --> [2:OK]
Feb 18 20:04:00.62: [ 2084]: SEND send PPS (partial page signal)
Feb 18 20:04:00.62: [ 2084]: SEND send EOM (more documents)
Feb 18 20:04:00.62: [ 2084]: <-- [9:AT+FRH=3\r]
Feb 18 20:04:03.72: [ 2084]: --> [0:]
Feb 18 20:04:03.72: [ 2084]: MODEM <Empty line>
...

Feb 18 20:04:08.36: [ 2084]: --> [2:OK]
Feb 18 20:04:08.36: [ 2084]: No response to PPS repeated 3 times.
Feb 18 20:04:08.36: [ 2084]: SEND end page


= end of 2nd job, 2nd on the batch, 2nd receiver
Feb 18 20:25:39.82: [ 3203]: --> [2:OK]
Feb 18 20:25:39.82: [ 3203]: SEND send PPS (partial page signal)
Feb 18 20:25:39.82: [ 3203]: SEND send EOM (more documents)
Feb 18 20:25:39.82: [ 3203]: <-- [9:AT+FRH=3\r]
Feb 18 20:25:42.92: [ 3203]: --> [0:]
Feb 18 20:25:42.92: [ 3203]: MODEM <Empty line>
Feb 18 20:25:42.92: [ 3203]: <-- data [1]
Feb 18 20:25:42.98: [ 3203]: --> [2:OK]
Feb 18 20:25:42.98: [ 3203]: <-- [9:AT+FTH=3\r]
Feb 18 20:25:43.04: [ 3203]: --> [7:CONNECT]
Feb 18 20:25:43.04: [ 3203]: <-- data [7]
Feb 18 20:25:43.04: [ 3203]: <-- data [2]
Feb 18 20:25:44.46: [ 3203]: --> [2:OK]
Feb 18 20:25:44.46: [ 3203]: SEND send PPS (partial page signal)
Feb 18 20:25:44.46: [ 3203]: SEND send EOM (more documents)
Feb 18 20:25:44.46: [ 3203]: <-- [9:AT+FRH=3\r]
Feb 18 20:25:47.56: [ 3203]: --> [0:]
Feb 18 20:25:47.56: [ 3203]: MODEM <Empty line>
Feb 18 20:25:47.56: [ 3203]: <-- data [1]

= end of 3rd job, 2nd in the batch, 1st receiver
Feb 18 21:01:07.32: [ 4955]: --> [2:OK]
Feb 18 21:01:07.32: [ 4955]: SEND send PPS (partial page signal)
Feb 18 21:01:07.32: [ 4955]: SEND send EOP (no more pages or documents)
Feb 18 21:01:07.32: [ 4955]: <-- [9:AT+FRH=3\r]
Feb 18 21:01:10.43: [ 4955]: --> [0:]
Feb 18 21:01:10.43: [ 4955]: MODEM <Empty line>
Feb 18 21:01:10.43: [ 4955]: <-- data [1]
Feb 18 21:01:10.49: [ 4955]: --> [2:OK]
Feb 18 21:01:10.49: [ 4955]: <-- [9:AT+FTH=3\r]
Feb 18 21:01:10.53: [ 4955]: --> [7:CONNECT]
Feb 18 21:01:10.53: [ 4955]: <-- data [7]
Feb 18 21:01:10.53: [ 4955]: <-- data [2]
Feb 18 21:01:11.94: [ 4955]: --> [2:OK]
Feb 18 21:01:11.94: [ 4955]: SEND send PPS (partial page signal)
Feb 18 21:01:11.94: [ 4955]: SEND send EOP (no more pages or documents)
Feb 18 21:01:11.94: [ 4955]: <-- [9:AT+FRH=3\r]
Feb 18 21:01:15.04: [ 4955]: --> [0:]
Feb 18 21:01:15.04: [ 4955]: MODEM <Empty line>
Feb 18 21:01:15.04: [ 4955]: <-- data [1]

= end of 3rd job, 2nd in the batch, 2nd receiver
Feb 18 21:03:51.05: [ 5036]: --> [2:OK]
Feb 18 21:03:51.05: [ 5036]: SEND send PPS (partial page signal)
Feb 18 21:03:51.05: [ 5036]: SEND send EOP (no more pages or documents)
Feb 18 21:03:51.05: [ 5036]: <-- [9:AT+FRH=3\r]
Feb 18 21:03:54.15: [ 5036]: --> [0:]
Feb 18 21:03:54.15: [ 5036]: MODEM <Empty line>
Feb 18 21:03:54.15: [ 5036]: <-- data [1]
Feb 18 21:03:54.20: [ 5036]: --> [2:OK]
Feb 18 21:03:54.20: [ 5036]: <-- [9:AT+FTH=3\r]
Feb 18 21:03:54.24: [ 5036]: --> [7:CONNECT]
Feb 18 21:03:54.24: [ 5036]: <-- data [7]
Feb 18 21:03:54.24: [ 5036]: <-- data [2]
Feb 18 21:03:55.64: [ 5036]: --> [2:OK]
Feb 18 21:03:55.64: [ 5036]: SEND send PPS (partial page signal)
Feb 18 21:03:55.64: [ 5036]: SEND send EOP (no more pages or documents)
Feb 18 21:03:55.64: [ 5036]: <-- [9:AT+FRH=3\r]
Feb 18 21:03:58.75: [ 5036]: --> [0:]
Feb 18 21:03:58.75: [ 5036]: MODEM <Empty line>
Feb 18 21:03:58.75: [ 5036]: <-- data [1]
Feb 18 21:03:58.80: [ 5036]: --> [2:OK]
Feb 18 21:03:58.80: [ 5036]: <-- [9:AT+FTH=3\r]

-- 
giulioo@xxxxxxxxx

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*