Re: [hylafax-users] MultiTech MT5634ZPX-PCI-V92 and Wedging

["Mike McMullen" <mlm@xxxxxxxxxxxxxxxxxx>]

----- Original Message ----- 
From: "Bill Binko" <bill-sender-4b2fd6@xxxxxxxxx>
To: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
Cc: "Mike McMullen" <mlm@xxxxxxxxxxxxxxxxxx>; <hylafax-users@xxxxxxxxxxx>
Sent: Wednesday, February 16, 2005 10:01 AM
Subject: Re: [hylafax-users] MultiTech MT5634ZPX-PCI-V92 and Wedging


> On Wed, 16 Feb 2005, Lee Howard wrote:
>
> ...
> > If you can't, then the modem really is hung, and it's likely a 
> firmware 
> > issue that MultiTech will need to examine.
>
> While I was in Class 2.1 at the time, I remember distinctly the fact that 
> there was a bad firmware revision for these modem that caused a similar 
> wedging.  
>
> Try running minicom on the modem and type
> ati0
> You should get a line that has the firmware revision at the end.
>
> Post it here and we'll look at your revision.  Steve Tuckner has been 
> great about helping with these issues, and he watches the board.
>
> Bill

Bill/Lee,

Thank you both for the good advice. When I get a window to to do what
both of you suggest, I'll run minicom and post results here. Right now we
are getting a fax blizzard (for us anyway) and I need to wait for a quiet time
to get the info.

Thanks!

Mike


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*